Vintage Hot Rod Straight 6 [S3 Ep.11-1]
Everybody knows that the engine is a central key component to ANY Hot Rod
project. But is a V8 the only way to go? NO WAY!! Stacey shows you why. He
takes a vintage straight six engine that has been sleeping in a crate for
almost 40 years and he puts on the right pieces. He shows you why the
straight six was a force to be reckoned with in the early days of hot
rodding. After that, Stacey jumps into the tips and tricks of how to paint
your own true Kandy paint job. If you are into vintage Hot Rods, Kandy
paint, and multi-carbs? You don't need to go on a diet... you just need to
Turbo Maverick Sleeper Outruns Drag Car
Josh Dillon's '73 Maverick Grabber doesn't look like it should run mid 6's
in the eighth mile, but it does! And outruns lots of full on drag cars.
Josh has driven this car on several road trips, and constantly beats on it.
The car looks rough, and even sounds sort of rough, but has a 75mm turbo that makes all the difference. On this
pass, the car made 12 pounds of Boost and runs a 6.62 at 105 miles per hour in
the eighth mile. The rough exterior and stock steel wheels make this
Maverick a killer sleeper!
The car has a 460ci big block Ford with stock block and stock crank. The
heads are stock castings that Josh ported at home. turbo is a Borg Warner S475, and Josh built every
piece of the turbo setup on a budget.
Transmission is a C6 automatic with stock hard parts and a Dacco torque
converter. Rear end is still the stock 8-inch!!!!
Desert Proofing the Ford Raptor! - Dirt Every Day Episode 2
On this episode of Dirt Every Day, Fred Williams up fits and outfits one of
the coolest 4x4's on the market today, the Ford Raptor. Raptors are high
performance desert machines, but we found one that earns it's owner a
living each week banging around on an obscure desert compound. The owner
is hard on his equipment and we took this poor bird of prey under our wing
for a week to transform it into a more vicious desert predator.
Dirt Every Day appears every other Thursday on the Motor Trend channel.
Subscribe now to make sure you're in on all the action!
Facebook - http://facebook.com/motortrendmag
Twitter - http://twitter.com/motortrend
Google+ - https://plus.google.com/1018679678590...
Website - http://www.motortrend.com & http://www.4wheeloffroad.com/
2014 Ford Raptor Special Edition Review, Walkaround, Exhaust
The Ford Raptor is back for 2014 with some great new updates! Check out our
Raptors at http://bit.ly/RaptorForSale This 2014 Ruby Red Raptor Special
Edition has a new exterior color, interior, graphics, and more! This
package makes the Raptor even more unique than it already is, by adding
unique color and interior only available through the special package. What
do you think of the 2014 Raptor?
This is Town and Country TV! We are dedicated to showing you videos of all
types of cars and trucks. We are a Ford Dealership in Birmingham Alabama,
but we will never use this channel to try and sell you a car. We use our
knowledge of Ford vehicles to show you great videos of the cars and trucks
we get to work with! Make sure to subscribe to our channel! You will be
glad you did!
Subscribe to our Youtube channel --- http://bit.ly/WgHvlH
Visit our Youtube Channel --- http://bit.ly/W7j8GJ
Facebook --- http://on.fb.me/11ewgme
Website --- http://bit.ly/VYa8UR
Twitter --- http://bit.ly/1386a5z
Town & Country Ford
5041 Ford Parkway, Bessemer, AL 35022
Hot Rod 292 six cylinder
This engine was a collaboration between my dad and his cousin. It's a 292,
.030 over. It's been balanced. It's got JE forged pistons that puts it at
about 10.5:1 compression. It has an Engle cam with 231 @ .050 duration and
.565 lift. The head is a lump port head by Self with Ferrea 1.94/1.6
valves, K-Motion springs, Bill Smith pushrods, and Harland Sharp 1.75
roller rockers. The oil pan is a Hamburger aluminum pan, and the timing
cover is a Frank pattern finned aluminum unit, and it has a custom made ATI
Super Dampner and aluminum Fidenza flywheel. The intake manifold is a
Clifford 4 barrel, with a 2" Super Sucker and currently has a Holley 750
carb on it., This is going in a '37 Ford pickup with a Richmond 5 speed