Viair onboard air system - install and overview
This is a full install video of a Viair Ultra Duty onboard air system. This
system was installed on a 2011 Super Duty, and powers a train horn, and QD
fitting for air tools. This system is 200PSI
Don't forget to ALWAYS have your vehicle running while using the
Get yours at: http://www.viaircorp.com/oba-ultra.html
Onboard Air - How To Install a Viair System
In this video I'll show you how I installed the Viair 2on2 onboard Air
system in the zombie jeep. The Viair 2on2 is 2 compressors on a 2 gallon
tank. The compressors and tanks are already plumbed. In this video, I'll
show you how to wire and hook up the airlines and install the viair system.
Share your videos and earn $$$$ here: http://bleepinjeep.com/submit-vids
Need To buy Parts? Get them cheaper Here:
Offroad Parks: http://bleepinjeep.com/offroad-parks
Tee Store: http://bleepinjeep.com/store
Coupon Codes: http://bleepinjeep.com/discounts
Click here to License this video: http://bleepinjeep.com/licensevideo
*Disclaimer - This product is meant for entertainment purposes only. Your
mileage may vary. Do not try this at home. Void where prohibited. Some
assembly required. For off-road use only. Slippery when wet. Batteries
not included. Do not use while operating a motor vehicle, heavy
equipment, cherokee, wrangler, or any jeep vehicle. May be too intense for
some viewers and children under 30 years of age. Please remain seated
until the ride has come to a complete stop. Studies have shown viewing
these videos causes increased cancer risks in laboratory test people. I am
not a professional, I have no training, I'm not even particularly good at
horse whispering. Don't believe everything that you know. Please keep
your hands in the vehicle at all times. Do not tap on glass. Do not eat
anything that has been on the floor for more than 3 days. Keep your hands
to yourself. Not to be taken internally. Reproduction strictly
prohibited. Driver does not carry cash. Objects in jeep mirrors may be
farther than they appear.*
RV Tire Inflator - VIAIR 400P-RV Automatic Product Video
The VIAIR 400P-RV Automatic Portable Compressor is the perfect tool for
inflating RV tires.
Featuring a vibration-resistant diamond-plate sand tray, heat-shielded
quick connect coupling, and an 8ft power cord, this unit can inflate tires
up to 150 PSI, well above the required pressure for RV tires.
It also includes a Tire Inflation Gun, Dual battery clamps, a 3 piece
inflation tip kit, a heavy duty deluxe carry bag and two coil hoses for up
to 60ft of reach.
Remove the orange rubber plug and screw in the air filter to prevent dust
and moisture from entering the system.
Pop open the hood and connect the dual battery clamps to the battery.
Always remember, red to red and black to black. Once connected, make sure
to start the engine to provide the required voltage.
Pull back the sleeve of the quick connect coupler on the primary hose
firmly to quick connect stud on the compressor. Connect the other end of
the primary hose to the male end of the Tire Inflation Gun. Next connect
the 90-degree twist on chuck to the female end of the tire inflation gun.
Remove the valve stem cap, attach the twist-on chuck to the tire valve stem
and secure it by tightening.
Power the compressor by pushing the ON switch on the front of the
compressor. Squeeze the trigger of the inflation gun to inflate the tire.
Make sure you don't over-inflate the tire past its recommended pressure, as
doing so can damage your tire and may cause serious bodily injury.
To get an accurate pressure reading, simply release the trigger of the
inflation gun. When the pressure gauge indicates the desired pressure,
remove the twist-on chuck from the tire valve stem.
To reach the back tires, you may need to use the extension hose included.
To do so, pull back the sleeve on the quick connect coupler of the primary
hose and connect it to the male end of the extension hose. Then reconnect
the extension hose to the tire inflation gun.
If your RV has Dual Rear tires, you can use the 45-degree push-pull chuck
VIAIR's 400P-RV Automatic Portable Compressor makes tire inflation easy and
affordable to help ensure your RV is in optimal running condition.
31" x 10.5" Fill Rate
0 to 30 PSI 2 min. 28 sec.
15 to 30 PSI 1 min. 25 sec.
33" x 12.5" Fill Rate
0 to 30 PSI 4 min. 00 sec.
15 to 30 PSI 2 min. 00 sec.
35" x 12.5" Fill Rate
0 to 30 PSI 4 min. 50 sec.
15 to 30 PSI 2 min. 20 sec.
Arabian Treks - Onboard Air & Water System, Arabian Treks Jeep JK Wrangler
I saw this idea on YouTube and I needed to have the same setup
Thanks for this video for the idea
Unfortunately it's not as nice as I planned, but its ok for the first test.
lack of tools and material made it a very difficult challenge
2012 Jeep Wrangler 3.6 Gasoline with 4.56 Gear ratio
AEV Front & Rear Bumper with Tire carrier and snorkel
AEV Fuel caddy
Procomp 16" Wheels with Master Craft 315/75/16
BF Goodrich spare tire 315/70/17 on Procomp 17" wheel
50" Rigid industries Combo LED on Poison spider bracket
Rigid industries D2s Diffused LED
J.W. Speaker Headlight
2X Rear LED Lights
Garmin Montana 650
Thuraya satellite phone
Warn 9000i winch
ARB Twin Air compressor
Flowjet water pump 1.1 GPM flow rate and 35 PSI water pressure.
ARB Twin Compressor Demo
ARB QLD's Roger Vickery demonstrates the power of the new ARB twin motor
air compressor on his regular Creek to Coast TV segment.
Video footage courtesy of Creek to Coast (www.creektocoast.com.au).
viair compressor review
review on the VIAIR air compressor its a real great product not many bad
things about it it is nice compact and quiet
On Board Air The Right Way
On board air using a Sanden compressor with additional stuff to utilize oil
in the compressor crankcase to achieve constant duty and high speed for
filling tires and running impacts. For more information log on to
XJTalk.com and browse On Board Air in the Technical How To section.
'Train Horn' On A Jeep Wrangler
This is an overview of the install of my Viair Ultra Light Duty onboard air
system and my Wolo Model 847 Siberian Express 'Train Horn' that I installed
on my 2002 Jeep Wrangler: Sahara Edition.
The tank is 1 gallon and though it does sound the horn for short blasts
you'll likely want the 2.5 gallon tank for longer runs of the horns. The
closest horn I can think of that this one resembles would be a Nathan P3
but the tone is definatly off from that one.
Overall the entire Jeep is a big toy for me and this is something I've
wanted to do for years. I figured the rail enthusiasts would appreciate it
and fellow Jeep owners would like to see how the set up was installed.
For the horn 'purests' out there that think it's a virtual sin to place a
horn of this magnitude on a vehicle, feel free to complain away. My skin is
VIAIR Tractor Tire Inflation
VIAIR Portable compressors spend a day on the farm...
TIRE FILL RATES:
9.5R 36 (230/95R36)
0-30 PSI = 4 min. 06 sec.
15-30 PSI = 1 min. 52 sec.
0-30 PSI = 4 min. 06 sec.
15-30 PSI = 1 min. 52 sec.
0-30 PSI = 5 min. 38 sec.
15-30 PSI = 2 min. 41 sec.
Special thanks to Tanaka Farms:
VIAIR Jeep JK 2007-2011 2on2 Bolt-On Platform Installation
VIAIR's 2on2 Bolt-On Platform is the newest solution to air management for
Jeep JK owners. Using either two 400C (High Speed) or 380C (High Pressure)
compressors at its core- and mounted on a 2.0 gallon 5-port air tank, these
vehicle-specific units provide more than enough CFM to accomplish virtually
any pneumatic task. The 2on2s all come complete with an easy-to-install
wiring harness and manifold to make wiring and plumbing the system
straightforward. Vehicle-specific bolt-on platforms for 2007-2011 Jeep JKs
are equipped with a crossmember mounting bracket.
VIAIR 88P Portable Compressor Review
This compressor gets 2 thumbs up. And it's cheap. Even for us Daily
Driver Jeeps who don't want to Air Down. Yep, it's a product review,
garage tested by me.
Viair 450p fully automatic compressor
This is just a test of the Viair 450p fully automatic 12v air compressor.
This is great for 4x4 trail use, around town, etc... this is my video of
filling up a 20lb converted propane tank to air tank.