Not the greatest run, but the back-fire was kinda cool lol. Spun 1st too much and short shifted 2nd, ended up missing 4th, and hit the brakes before the traps, but still ran 12.4 @ 84mph. I backed up and went forward because my buddy told me I had some water on my tires from the water box and wanted to get some of it off. SUBSCRIBE FOR MORE VIDEO'S OF MY GSX!
Marios Eclipse GSX 400HP ST2 project
HEY HOWS IT GOING, IV BEEN BUILDING THIS CAR OVER THE LAST YEAR AND AM
PLANNING TO RACE IT NEXT SEASON IN THE NASA ST2 CLASS. I USED TO HAVE MY
PRO LICENSE ROADRACING STREETBIKES BUT BROKE MY NECK A LITTLE OVER 5 YEARS
AGO NOW SO IM NOW A C5-C6 QUADRIPLEGIC. SO I BASICALLY JUST PREMATURELY
GRADUATED FROM 2 WHEELS TO 4... LOL
THE CAR SHOULD BE PRETTY FUN ONCE I GET A NEW TRANNY FOR IT IT WILL DO
PRETTY WELL I THINK.
ILL POST MORE THROUGH OUT THE SEASON.
CHECK OUT MY BLOG AT KEEPEMSPINNINRACING.BLOGSPOT.COM
THANKS FOR WATCHING AND GOD BLESS.
Palm Beach International Raceway C5 Zo6 Corvette, 99 Mitsubishi Eclipse GSX
Two of my friends who are both brothers at the track. Zo6 has Longtubes and
a 75 dry shot on street tires. GSX is running an Forced Performance 3052
(GT3076R), DSM link, BC 272's, etc on 26lbs stock 7 bolt. GSX has ran a
best f 11.72 @ 117 on a colder less humid day.
Sorry the video came out a little weird with the transitions and music.
Windows movie maker is giving me problems. Probably from the spyware that
made it onto my pc. Hopefully this will be the last time I use movie maker.
I'll be doing my editing with Adobe Premiere Elements from now on as long
as my slow ass pc has enough ram to run it.
1995 Mitsubishi Eclipse GS-T
T-25 @ 14psi
194.4 whp / 217.0 ft-lbs tq
GReddy 18R FMIC w/ piping, GReddy Type-S BOV [recirculated], A'PEXi 2.5" to
3" turboback w/ high-flow cat,
Punishment Racing tubular manifold, K&N FIPK w/ hardpipe, Hallman MBC @
14psi, eprom ECU socketed by ECMtuning, etc.
More on this car here:
1995 Eclipse GSX build
Pics from 10/10/08 to 10/24/09. I basically tried to keep it as stock as
possible since this was my daily driver during this time.
-HKS turbo timer
-HKS Air filter
-HKS SSQV BOV
-SS oil feed line
-EVO 9 Pistons and rods (8.8:1) compression
-ACL main bearings
-ARP main and headstuds
-AEM Fuel rail
-VR Speed FMIC
The car no longer has this engine since I sold it with a 95 Talon I had.
The car now has a 6bolt engine with a 35R turbo and many other mods.
The RED DEMON - 8 Second Talon
The Boostin' Performance RED DEMON
dominating the Gangster class at KOTS X... This car is NO JOKE, nearly
1000hp to the wheels and with low 8 second E/T's... it's no wonder it
KILLED the game and finally represented the AWD cars at KOTS! Congrats on
the win guys.
6 bolt 4g63 in 2g Eclipse GSX cylinder head removed in under 10 mins
Removing the head of a 4G63 in 10x speed.
The project got delayed a few months. After finishing it and cranking it
over, Interference in the cylinder was discovered. Shamefully, I admit my
mistakes were: 1) Not putting the spark plugs in immediately after
installing the head. 2) The bad habit of using my Valve Cover as a parts
tray and 3) Putting off the project too long, so I didn't recognize a
missing bolt from a custom fabrication.
The head needed new valve seats, valves and some welding. Wiseco and the
machinist both thought I'd be OK running the piston after smoothing out hot
spots, but I ordered a new piston not wanting to risk the deep gouge in it
with the high Boost I plan to run.
Peace of mind is priceless.
The danger in being over confident is sometimes you skip triple checking
stuff. I've built that engine at least 5 times and got careless.
You can see the port work I did on the head @
http://www.southernutahautos.com under "Tech Tips" and "Beyond Bolt-ons"
OLD VIDEO: 1997 Eclipse GSX Brian Crower 280 Cams.
Fully built Eclipse GSX with 280 cams! With 3" QTP Cut Out open.
New setup photo:
Will get a new video up soon.