Formula One V6 turbo: 2014 Rules Explained
Transforming Formula One: 2014 Rules Explained: CGI Clip
A new clip from Red Bull sees Daniel Ricciardo and Sebastian Vettel explain
the 2014 Formula One regulations -- which are arguably the most complex the
sport has ever seen.
At the start, thousands of car parts simultaneously assemble around Dan to
form the RB10.
As Dan races to catch up Seb in his RB9, the World Champion's car becomes
transparent while travelling at full speed. The film then presents a visual
sequence that shows the 2014 regulation changes taking shape and coming to
life, as Seb's car transforms into an RB10.
As well as providing information on the new technical changes for 2014, the
clip also presents a unique view of the technology at work inside this
year's Formula One cars.
More information on the Red Bull Ring is available at
Follow us on social media @
Mazda Wheel stand - EZYTEN
Matt's Rotorworx powered Mazda 1300 rotary doing a big wheel stand launch
at Calder Park. 13B single turbo rotary.
Mazda RX2 13B turbo runs 9s
This Mazda gets a little loose on the track on its way to running 9-second
passes at Calder Park.
Mazda 3 sedan 20b racecar First race of 2013 (Zolder)
Mazda 3 sedan 20B racecar. (axela)
3 rotor engine with approx. 450hp (N/A, no turbo)
Rear wheel drive
Team: Van Herck Racing
Driver: Werner Van Herck (B)
event: FIA GT
track: Circuit Zolder
race series: Supercar Challenge http://www.supercarchallenge.nl/
date: 19, 20 and 21 april 2013
This video includes footage from the training session, qualifying and the 2
races of the weekend.
Qualified 3rd in GTB class (out of 5 entries) and 14th overall (out of 17
race 1 result: finished 2nd in GTB class and 12th overall
race 2 result: finished 4th in GTB class and 13th overall
improvements from last years car.
- bigger wing
- canards on front bumper
- new/stronger gearbox
- flat floor
- rear diffuser
More video's of this car on my channel.
Onboard video of this car from 2014.
Check out this site for more info about the car
You can see all my pictures of this car on this link.
Like my Facebook page
Part 12: 13B Rotary Engine Rebuild - My 76 Mazda RX-5 Cosmo Restoration
Just as I promised last episode, it is finally time to build the engine!
Part 12 of my RX-5 Cosmo restoration covers the entire process of building
the 6 port 13B Mazda rotary engine. While this engine is a hybrid of GSL-SE
RX-7 and Cosmo parts, the process is the same for any rotary from a 12A to
a 13B NA, 13B turbo, 13B-REW or any
other variant of the 13B. This video shows the whole process of the engine
build, starting from measuring the rotors and covering everything else
including clearancing the side seals, assembling the rotors, complete
assembly the short block, setting the eccentric shaft end play and
installing the front cover and everything underneath it. It's probably the
most complete engine build video outside of what you can buy from the
vendors, and as such, is an hour long. After this one, I'm going back to
videos under 20 minutes. But for now, grab a beverage of your choice, sit
back, and enjoy.
TX2K12 - 8 Second 2JZ S2000 Giant Wheelie!
TX2K12 DVD Released! http://www.1320video.com/store/dvd/ Raw Performance's
2ZJ powered Honda S2000 decided it would try and launch off the drag strip
Sunday at TX2K12 during an elimination pass against the Majestic
WORLDS FASTEST AWD / 4G63 DATSUN / 20B RX7 IN TESTING
Willowbank Raceway held the 1st of the 2012 Top Sportman Series on the
weekend. Reece McGregor and the Heat Treatments Skyline thought it would be
a good chance to have some test runs in their worlds fastest RB26 powered
4wd skyline. The team worked hard all day and were rewarded with a final
pass or 7.64, not far off their 7.56 record, although something tells me
theres plenty more to come from this car again.
Another car using the test lane was Rob Novak in his Jett Racing 4G63
powered Datsun 1200. The team made adjustments through the day and saw a PB
7.35 @ 187mph on the second last pass of the night, the final wild pass on
video then saw a transmission failure but a happy team none the less.
Final team testing was the Direct Clutch/Promodz Rx7, the car is 3/4
chassis and a running 3rotor 20BT tweaked by Mazfix. The team recently made
adjustments in the rear and also in transmission and are starting to see
results, it ran a 7.99 @ 171mph through the day, then later in the night
suffered a leaking Boost pipe.
Owners Jerry and Dan tell me they havent even started to push the motor
yet, so another car with plenty more to come, and im sure that pb 7.80 will
soon be slashed.
These cars should all be running at the up and coming Sydney Jamboree at
WSID and by the looks of things have some unfinished business they want to
take care of :)