Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

69 Bug with 1915cc Performance engine


 


More Videos...


Volkswagon beetle with Suzuki motor
Volkswagon beetle with suzuki TL 1000 motor





1971 VW Super Beetle with Subaru engine





Awesome V12 Monster diesel engine Awake and Alive startup
Awesome V12 Monster diesel engine Awake and Alive startup The first V-type engine (a 2-cylinder vee twin) was built in 1889 by Daimler, to a design by Wilhelm Maybach. By 1903 V8 engines were being produced for motor boat racing by the Société Antoinette to designs by Léon Levavasseur, building on experience gained with in-line four-cylinder engines. In 1904, the Putney Motor Works completed a new V12 marine racing engine -- the first V12 engine produced for any purpose.[2] Known as the 'Craig-Dörwald' engine after Putney's founding partners, the engine mounted pairs of L-head cylinders at a 90 degree included angle on an aluminium crankcase, using the same cylinder pairs that powered the company's standard 2-cylinder car. A single camshaft mounted in the central vee operated the valves directly. As in many marine engines, the camshaft could be slid longitudinally to engage a second set of cams, giving valve timing that reversed the engine's rotation to achieve astern propulsion. "Starting is by pumping a charge into each cylinder and switching on the trembler coils. A sliding camshaft gave direct reversing. The camshaft has fluted webs and main bearings in graduated thickness from the largest at the flywheel end."[3] Displacing 1,119.9 cuin (18,352 cc) (bore and stroke of 4.875" x 5" (123.8 x 127 mm)), the engine weighed 950 pounds (430 kg) and developed 150 bhp (110 kW). Little is known of the engine's achievements in the 40-foot hull for which it was intended, while a scheme to use the engine to power heavy freight vehicles never came to fruition.[2] One V12 Dörwald marine engine was found still running in a Hong Kong junk in the late-1960s. Two more V12s appeared in the 1909-10 motor boat racing season. The Lamb Boat & Engine Company of Clinton, Iowa built a 1,558.6 cuin (25,541 cc (5.25" x 6" (133.4 x 152.4 mm)) engine for the company's 32-foot Lamb IV. It weighed in at 2,114 pounds (959 kg). No weight is known for the massive 3,463.6 cuin (56,758 cc) (7" x 7.5" (177.8 x 190.5 mm)) F-head engine built by the Orleans Motor Company. Output is quoted as "nearly 400 bhp (300 kW)". By 1914, when Panhard built two 2,356.2 cuin (38,611 cc) (5" x 10" (127 x 254 mm)) engines with four-valve cylinder heads the V12 was well established in motor boat racing.[2] In automobiles, V12 engines have not been common due to their complexity and cost. They are used almost exclusively in expensive sports and luxury cars because of their power, smoother operation and distinctive sound. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ ▬▬ ★ MORE INTERESTING VIDEOS: http://www.youtube.com/watch?v=yrbwGmtZ8pM&list=UUYH8swcp71EHt-88lkaMDTQ ★ SUBSCRIBE: http://goo.gl/GynuUU ★ Follow my Twitter: https://twitter.com/GeorgeDominik1 ★ Thanks For Watching ★ ★ Post comment , share and tell us what u think ★ ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ ▬▬





NRE Encounters Black Hole While Testing Engine. 2500 HP 632CI BBC. Nelson Racing Engines. Camaro.
This is an unusual NRE Dyno room visit. First, this beast broke the Dyno again. Second, this engine is one of the meanist engines Tom has ever designed. Tom has to go to extreme measures to test this extreme horsepower engine. Then there is the issue of the encounter with the Black Hole. Man that is crazy! The City of Chatsworth seems to have questions. Its not our fault! We usually upload new videos on Friday when available so you can look for them. The uploader in chief is out of town this Friday. Look for a new car video on friday about two weeks from now. More information can be found at http://nelsonracingengines.com as well as http://nelsonsupercars.com. For media production go to http://VeritasMovieStudio.com. Take a look on Google for, TRYHRD Australia, our Customer's beast. NRE TV episode 177.





1915 after break in idf webers 120 cam cal look
67 bug 1915 cc naturally aspirated





My 64 baja 1915cc dual dells
Just put some 36 dual dells on my baja i had dual 40 webers on this motor in my rail buggy ran great but i think the 36 dells run alot better.The video the dells are not tuned in yet just havent had the time but will put a video up when i get it tuned.





Playing around in the drive way in the Turbo Bug





1915cc 48 IDA
Driving with my '64 bug. Engine: 1915cc, FK-8, 48 IDA





How an engine works - comprehensive tutorial animation featuring Toyota engine technologies
Nobody this video was designed for needed to know or cared about discontinued Supra (or other long discontinued inline 6) engines so don't bother posting a comment about them. This was 2007 and newer US MARKET ONLY Toyota technologies.





MY1964 VOLKSWAGEN BAJA 1915cc WALK AROUND
64 baja bug 1915cc.........Built in about 4 month 74 pan 64 baja lifted one notch in the back with notched spring plates.Front was lifted to the top with big tires 3inch body lift dual 36 dells 32in boggers.





Decarbonizing Your Engine With Water -EricTheCarGuy
I get asked all the time about using Seafoam or other products to clean an engine. Granted, those products if used correctly do have their place but with something as simple as a cup of water you can decarbonize your engine. The thing is DON'T USE TOO MUCH! You can actually damage your engine if you put too much in so be careful. That said, on a fully warmed up engine a couple of squirts of water in the engine can break up carbon deposits in your engine. Just before I rebuilt the carburetor on the Ford I decided to perform this procedure and make a video about it. It's a cheap effective way to clean your engine. Like I said though, don't use too much or you'll be putting an engine in. Camera: Brian Kast The best place for answers to your automotive questions: http://www.ericthecarguy.com Related videos. Cleaning Throttle Bodies: https://www.youtube.com/watch?v=41yFXjibtLY Solving Performance Problems 1: http://www.youtube.com/watch?v=rsGTeWayqIU Solving Performance Problems 2: http://www.youtube.com/watch?v=sAKwCzUE_9M Re Performance Problems: http://www.youtube.com/watch?v=_vAJi5rLMGY Diagnosing a Catalytic Converter: https://www.youtube.com/watch?v=9VZ5K8n5jj0 Related articles. Idle issues: http://www.ericthecarguy.com/faq/solving-automotive-idle-problems Performance issues: http://www.ericthecarguy.com/faq/solving-automotive-performance-issues Getting Better MPG: http://ericthecarguy.com/faq/finding-and-fixing-the-causes-of-poor-mpg Discussion about this Video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/52276- decarbonizing-your-engine-with-water#103995 The best place for answers to your automotive questions: http://www.ericthecarguy.com ETCG FAQ Page: http://www.ericthecarguy.com/faq EricTheCarGuy code lookup: http://www.ericthecarguy.com/obd-code-lookup Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Information on Premium Membership: http://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.





2332 beetle VW 170hp accelerates 0-100
Just got the car off the Dyno. 170hp at 5250rpm. 2 short blasts up to 100km/h. Clutch cant handle a standing start. Home built and home ported heads.





VW 1915CC CROSS - FIRE DUAL PORT
WHOOPS CAMERA MAN STANDING ON HIS HEAD. FIRST FIRE UP WITH CROSS FIRE AND 40MM DELLORTO DRLA DUAL THROAT SINGLE CARB THIS CARB WAS CONVERTED TO A CROSS BAR SPRAYER SIMILAR TO AN AIRCRAFT CARBURATOR.THE 40MM VENTURI KIT IS ALSO USED . AFTER RUNNING THE ENGINE I DID A PLUG CHECK AND ITS TOO LEAN SO I WILL HAVE TO RICHEN UP THE AIR CORRECTION JET AND THE MAINS ALSO..





Dissecting an Engine, The Basic Parts and Their Functions - EricTheCarGuy
Dissecting an Engine, The Basic Parts and Their Function - EricTheCarGuy http://www.ericthecarguy.com/ I've had more than one request for this and since I had a few hours while sitting on my butt waiting for my Dodge engine to show up I thought I would fill the time by making this video for you. I have to say that after the first edit I wasn't too happy and went back and reshot not once but twice and even then I still felt I didn't cover it the way I liked. I should really start scripting these videos, it would make my life soo much easier. Anyway don't be too rough on me if you have differing opinions as I'm willing to accept them in the comments if you are nice about it but if your going to tear me a new one then please make a video of your own explaining why as at least then we will be on the same playing field. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.





Steel City Classics 2010 Gary, IN




Which car is faster? Which Car is Faster?





Similar 1/4 mile timeslips to browse:

2004 Koenigsegg CC8S : 10.050 @ 135.120
NA, Tires: Michelin Pilot Sport PS2


1993 Cadillac Allante : 14.900 @ 92.910
Mr. J, Engine: 4.6-liter Northstar V8 295-horsepower, Tires: 225/60VR-16


 


©2014 DragTimes - Disclaimer