Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

Chevy Silverado 4.8L w/ Gibson Super Truck Exhaust

I put the full stainless Gibson Super Truck Exhaust system on my truck. It sounds pretty decent, and the salt will not rust it!


 


More Videos...


2007 Chevy Silverado dyno, throttle body port & polish
A quick look at porting and polishing the throttle body on my 2007 Chevy Silverado 5.3L Crew Cab Z71 4x4. Then a couple of Dyno pulls to compare exactly what kind of RWHP loss larger tires do to a truck. Mods include K&N Intake, Gibson headers, Flowmaster dual Exhaust, HP custom tune and of course P&P throttle body. Be sure to check us out on Facebook at Triple-X Motorsports & Outdoors for all the latest updates! http://www.facebook.com/pages/Triple-X-Motorsports-Outdoors-RekjavicXXX/143 751552330968





Borla GMPP Touring Muffler for 2007.5 - 2013 Sierra / Silverado
Installed a Borla GMPP Performance stainless muffler for a GMC Sierra and this is a little sound byte to hear what you'd be getting if you were to order one. I had the catback system on my 2007 and loved it. In the new Sierra, just ordered a muffler to install. It seems that the tone is a bit deeper and a bit smoother than a Dyno max or Magna Flo muffler system. GM used to include these performance Exhausts in their accessories division and have since stopped offering them as well as other great performance parts. It's a shame as these are great upgrades to the Sierra/Silverado truck line-up.





straight piped 2000 silverado 4.8l drive off
My truck driving off, didnt want to leave a black mark by my buddies house look for better video in the future. My 2000 Silverado with a 4.8L. it has a Jet performance programmer, E3 spark plugs, Taylor 8.2mm wires, Airaid intake tube, Eagle alloy rims and Kumho AT tires and dual cat-back Exhaust with out mufflers





Flowmaster Cat-Back Exhaust Install on 2011 GMC Sierra
Installation of a Flowmaster Force II Cat-Back Exhaust (#817523) on a 2011 GMC Sierra. I made this video because I was researching installing one of these on my truck and I couldn't find anything for a GM Truck. I saw some Mustangs, some Camaros, some Ford trucks, etc. But nobody had documented what it would be like for a GM truck. So here you go. All in all, it was pretty easy and only took a couple hours. I can't promise how close they are, but the instructions and kit were for 2007-2012 GM Trucks. So this would most likely apply to them as well, with perhaps a few deviations. Also, sorry for the fact that it's all close ups, but when your truck is on ramps and your lying underneath it you can only zoom out so far. [15 Oct 13] One more thing as a note on warranties. Here is a snippet from the Flowmaster FAQ: "There are some modifications that have the potential to void a vehicle's factory warranty, but modifying the Exhaust system after the catalytic converter is not one of them. All Flowmaster Exhaust systems are designed vehicle specific and do not violate manufacturers factory warranty. If you're having problems regarding this issue, please contact www.sema.org for more information regarding consumer's rights on performance aftermarket parts."





87 Chevy Truck Project Update - Flowmaster Exhaust Sound - 20 December 2013
Stepping away from the "Squirter Project" and back to the 87 Chevy Truck. I go over the LS 5.3 with 4.8 flat top pistons that will be installed into the truck, a 60/40 bench with folding console that I plan to install and few other lil things that I've been working on it... like installing HEAT! That was important... ========================================= Follow me on Facebook here: https://www.facebook.com/AGearHead4Life?ref=br_tf ===================================== Below are some of the 5.3 swap videos on this truck that were made after this point. Close look at the home ported 862 heads with LS1 valves: http://youtu.be/kmkiGiJvtc8 Torquing the heads down with eBay head studs: http://youtu.be/qTbDUszSC40 Priming the engine with a home made external oil primer: http://youtu.be/thfTnYdeNz8 First start-up on engine stand: http://youtu.be/VogkaVNGkCU Here's the first start-up video once we got this engine in the truck: http://youtu.be/2OqPI6coEpI To see all of my playlists of my projects, click here: https://www.youtube.com/user/AGearHead4Life/playlists?shelf_id=13&view=50&s ort=dd Keep on Wrench'n!





2008 Chevy Silverado "Silverod" LS7 Burnout Truckin Feature
At the photo shoot for the feature in Truckin Magazine, we will just say it got a little crazy!





Muscle Truck vs. Baja Bug! 1974 Chevy C10 Battles Fred's Volkswagen Baja Bug - Roadkill Ep. 28
Remember the drag racing '74 Chevy Muscle Truck from Roadkill Episode 18? It's back, but with a twist: it's gonna become a true dual-sport ride for surf and turf, shedding its drag slicks for Super Swamper Boggers and hitting the sand dunes...hard! And to prove that a lowered, two-wheel-drive pickup can dominate the dunes, Freiburger and Finnegan set up a shootout with Fred Williams from the Dirt Every Day series on the Motor Trend channel. Fred brought out his '69 VW Baja Bug from DED Episode 23 and went head to head with the Muscle Truck on the beach at Pismo, California. The Roadkill/HOT ROD Magazine Muscle Truck is a '74 Chevy C10 shortbed, stepside, with a GM LS6 crate engine (like the all-aluminum V8 found in a C6 ZO6 Corvette). It's stock other than a small crane cam, midlength headers, and a new addition for this episode: MSD's Atomic EFI (the truck used to run a carburetor). The Atomic setup is atop a BBK intake manifold, and uses a stock LS1 throttle body. That legendary Exhaust sound comes from 3-inch pipe with 4-inch Dynomax Bullet race mufflers. The truck's transmission is a JW turbo 400 backed by a Gear Vendors over/underdrive unit. And it really needs overdrive because the Ford 9-inch rear carries 5.13 gears and a spool. The suspension features dropped spindles and Ridetech Strong Arms and air bags up front. In the rear, two leaves were removed from the stock spring packs, they were flipped under the axle, and traction is delivered by Caltrac's bars. Roadkill appears every fourth Friday on the Motor Trend channel. http://www.youtube.com/motortrend Subscribe now to make sure you're in on all the action! http://www.youtube.com/subscription_center?add_user=motortrend Facebook - https://www.facebook.com/RoadkillShow, http://facebook.com/motortrendmag & http://facebook.com/hotrodmag Twitter - http://twitter.com/motortrend & https://twitter.com/hotrodmagazine Google + - https://plus.google.com/+motortrend/posts Website - http://www.motortrend.com & http://www.hotrod.com





My Truck With Dual Exhaust Flame Throwers and Train Horn
Here is a video of my 1965 Chevy 4x4 throwing flames out of its dual Exhaust and blowing its train horn. (The second horn wasn't as loud, because I let the air pressure get a little low)





2010 Silverado Flowmaster 10 series Exhaust
2010 Silverado with factory manifolds, cats and installed a Flowmaster Super Series 10 single chamber muffler. Sounds great and not much interior resonance since I used the stock tail pipe and put the muffler as close to the axle as possible. Truck also has KNN intake system and custom tune from PCMforLess.com Truck has 4.8 and 4x4





Ford F350 vs. Dodge Ram vs. Chevy GMC Sierra Truck Challenge MEGA TEST
Auto Ad Builder is on the scene at The Truck Challenge at GM's Street's in Motion Ford F-Series, Chevrolet Silverado, Dodge Ram Pick up Follow us on Facebook: http://www.facebook.com/automotivead.builder.1 Dealer Services: http://autoadbuilder.com





glasspack vs flowmaster
this is a comparison of the two on an '87 firebird with a 305. the flowmaster has a harmonized sound because of the dual outlet so try to keep that in mind. unfortunately im stupid and dont know the brand of glasspack nor the series of muffler.





Install Flowmaster American Thunder Exhaust on a 2005 Chevy SSR
Buy Flowmaster American Thunder Exhaust: http://www.autoanything.com/Exhausts-mufflers/61A3545A0A0.aspx The Chevy SSR looks slick, but the big V8 engine in it is no sleeper. Performance and style makes for one great package, but Flowmasters American Thunder Exhaust system will really turn heads. The pronounced Exhaust note is driven by their 50 Series Muffler, which has one 3" inlet and dual 3" outlets (part # 17399). More Flowmaster Exhaust Systems can be found here: http://www.autoanything.com/Exhausts-mufflers/20A50380A1.aspx Or an even wider variety of Exhaust systems and mufflers can be found here: http://www.autoanything.com/Exhausts-mufflers/10A50209.aspx





30ft Flamethrower exhaust!
Video shot at frankensteiners ball in Anoka MN, October 20, 2013. Was a great show, have lots more footage of the show on my channel. Please subscribe and check out my channel to see more :) https://www.facebook.com/tinman2kustoms https://twitter.com/Tinman2Kustoms





Chevrolet Tahoe Тест-драйв.Anton Avtoman.
http://vk.com/antonavtoman Добавляйтесь в друзья!) http://www.facebook.com/anton.vorotnikov Ещё Внедорожники http://www.youtube.com/playlist?list=PLW46cP6LCzTVqzSQefiwfpMrobqLXAm2G Chevrolet Tahoe Тест-драйв.Anton Avtoman.





ZR1 Vette vs Jet! - Chevrolet Corvette ZR1 Races A U.S. Navy Fighter Jet
MT Editor at Large Arthur St. Antoine pits Chevy's awesome "Blue Devil" -- the Corvette ZR1 -- against its toughest adversary yet: a Blue Angels F/A-18 Hornet fighter jet. Shot By: Jim Gleason & Terren Lin Edited By: Jim Gleason Read the story here: http://www.motortrend.com/features/performance/112_0908_chevy_corvette_zr1_ vs_fighter_jet_race/index.html





Which car is faster? Which Car is Faster?




Similar 1/4 mile timeslips to browse:

1964 Chevrolet Chevy 2: 10.610 @ 117.000
, Engine: 355, Tires: firestone


1991 Chevrolet Chevy S10: 11.526 @ 115.370
Jason Miller, Engine: 350, Tires: micky thomson 32-14.5-15


2005 Chevrolet Chevy Corvette C6: 12.557 @ 110.860
James, Engine: LS2, Tires: Stock non Z51 run flats


1955 Chevrolet Chevy : 12.720 @ 109.500
Ken Abbott, Engine: 454 Chevy, Tires: 28.5 Slicks on rear


 


©2015 DragTimes - Disclaimer - Contact Us