Lamborghini Reventon from a Mitsubishi Eclipse
This is a picture collection of how a 2003 Mitsubishi Eclipse became a Lamborghini Reventon! This car IS NOT MINE! It was built by Alexander Stupkin, a young Ukrainian jeweler from Odessa. Thank for watching!
Hot Mitsubishi´s
My favourite Mitsu´s!!!
That´s hot cars!!!
Damn!!!
custom door panels
how to fabricate fiberglass panel inserts for speakers for car doors
650 HP Mitsubishi Eclipse Gsx Hill Climb Rally Car - 2012 Czech Champion
This 650 hp monster is driven by Mark Rybníček. In 2011 and 2012 Mark became the Czech Hill Climb Champion with this Mitsubishi Eclipse GSX which since 2011 has been painted black. Watch the old video by clicking this link http://www.youtube.com/watch?v=Aqms05BQmI4
Video by: http://www.youtube.com/nedbis Check him out.
"mitsubishi eclipse gsx" eagle talon tsi awd Boosted launch Exhaust racing race four 2.0 liter 10 seconds honda dsm power skyline supra american muscle corvette z06 awd turbo bike twin auto manual rwd awd launch controll rx7 v8 lamborghini ferrari john shephard 2g tuners hoosier magnus evo evolution 350z 370z new r35 4g63 evolution 420a revention ultimate aero drag speed cars race plymouth laser
fast and furious eclipse fora da lei
Meu mitsubishi eclipse do velozes e furiosos da equipe FORA DA LEI do Rio Grande do SUL... sim ele ta alto nas fotos pq o carro tava sem o motor entao nao tinhas peso pra baixar a frente dele... mas no outro video ja da pra ver ele com a altura normal
DIY- How To Paint Your Car Interior In 10 Steps
1. a. Prep Clean Part With Warm Soapy Water
b. Prep Wet Sand With 800-1000 Grit Sandpaper
c. Let The Part Compelety Dry For A Hour
2. a. First Coat Of Primer Make It Light
b. Second Coat Of Primer Make It Meduim
c. Last Coat Of Primer Make It Heavy But Watch For Runs
3. a. Sand The Primer With 800-1000 Grit
4 a. First Coat of Paint Make It Very Light Just Enough To Make Spots Hold Can 12 Inchs Away From Part
b. Second Coat Of Paint Make It Light After This Is Done You Should Still See The Color Of The Primer
c. Thrid Coat Swipe Paint Across The Part And Now You Should See No Primer
d. Fourth Coat To Etc. Coats Swipe Paint Across Paint Lightly
5. a. Clear Coat Stage Spot Your Clear On Your Part Lightly
b. Repeat Atleast 5 Times After The First Coat You Can Spray A Little Thicker
6. a. Extra Stage You Can Grab You Some Good Wax And Put It On Thick To Protect Your Part Better
7. a. Designs Or Logos- You Can Apply A Smily Face Sticker On A white Piece
b. Paint That Part Black
c. Remove The Sticker And The Face Will Be White
d. Look On Google For Logos Or Letters
e. Print And Razor Blade The Logo or Letters Out
8. a. Tips- Wait Atleast 10 Mintues In Between Coats
b. Tips- Do NOT Move The Part After Painted
c. Tips- Shake Can Before Use And Clear After Use
9. a. TroubleShooting- Clear Is Dull= The Weather Is To Hot or Cold Need Between 70-80 Degress
b. TroubleShooting- Paint Is Running= Your Holding The Can To Close To the Part
c. TroubleShooting- Paint Cracked or Bubbled= The Part Was Wet
d. TroubleShooting- A Bug, Dust, Or Grass Fall On My Fresh Paint= Let Cure A Full Day And Wet Sand With 1000 Grit
10.a. Curing The Paint- Wait Atleast 4-5 Days After Last Coat Of Clear Is Appiled
b. CUring The Paint- Make Sure It Is In A Warm Area
My 2.3 Eclipse GST Turbo Build!
My first car when I turned 16. Almost completely stock when I got it. Finished it up at the age of 22 while I worked full time and went to College. I hope everyone enjoys my hard work. NEW Dyno WATCH http://www.youtube.com/watch?v=ceS4YUer6tw
1999 Eclipse LED tail lights
A little video made for other DSM enthusiasts or electronic DIY-ers : my 1999 Mitsubishi Eclipse RS. I'm the original owner, and have done a few mods over the years.
