Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

2001 MAXIMA KEEPS CUTTING OFF

2001 Maxima 3.0 VQ30DE-K Berk Shortram Intake, Megan Racing Catback Exhaust...car keeps cutting off when it lowers back down to idle...trying to figure out if its TB, or IACV related


 


More Videos...


How To Find A Vacuum Leak - EricTheCarGuy
Vacuum leaks are one of the biggest causes of engine performance problems. This video is pretty straight forward in it's approach to finding a vacuum leak. On thing I might mention is that not all vacuum leaks are at the engine. Some HVAC systems run on engine vacuum and can cause a leak under the dash in some cases. I've even seen vacuum operated door locks. Just be sure to be careful spraying flammable stuff on a hot engine, you don't want to take one problem and make it a whole lot worse. You can also use a spray bottle with water to do this same test. It may not be as effective, but you don't have to worry about spraying a flammable substance on a hot engine. For more information on diagnosing engine performance issues, check out this article I wrote. http://www.ericthecarguy.com/faq/solving-automotive-performance-issues The best place for answers to your automotive questions: http://www.ericthecarguy.com Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.





2001 Nissan Maxima Engine clip with Injen CAI
Simple engine vid for sound/look Injen intake I just installed for Corey. :D





01 AE Nissan Maxima MAF probs
Full throttle acceleration from stop. 0-60.. Dying MAF(Mass Air Flow Sensor) first video.. audio is off sync





iac cleaning
how to clean an idle air control valve. made for kathy





how to tell if your iac valve is going bad
please correct me if im wrong about any thing in the vid.





How to clean a throttle body and Idle air control valve (iac)
*** PLEASE READ *** In this video demonstration, I show how to get to, remove, clean, and replace the throttle body and idle air control motor (aka IAC) on a 4.2l ford motor. This procedure is the same for any fuel injected vehicle. * * * Check out my website krkvideos.com * * * The vans require removal of alot more stuff just to access the throttle body. A dirty IAC can cause a rough idle. A dirty throttle body can harm performance and cause rough engine operation. When the throttle body or iac is removed a new gasket must be used to properly seal the connection to the intake. GM idle air motors are generally mounted on the throttle body and can be cleaned without removal from the throttle body. This means one less gasket and a lesser chance of creating a vacuum leak. The ford throttle body had a note on it that said it was not to be cleaned because the coating on the throttle blade might be damaged. Thats fine for a new car but that has to be disregarded when working on something that has some miles on it. Subscribe to my channel. * * * Definitions: * * * MAF - Mass Air Flow sensor - Monitors the amount of air the engine is intaking. IAT - Intake Air Temperature - Measures the temperature of the air the engine is intaking. IAC - Idle air control - Controls the amount of air the engine is intaking while it is idling. Throttle body - Responsible for regulating flow of air into the engine as you press the gas pedal. TPS - Throttle position sensor - Tells the computer how far you are opening the blade in the throttle body so it can add more fuel to compensate the added air. * * * Visit krkvideos.com for more! * * * * * * Visit krkvideos.com for more! * * * * * * Visit krkvideos.com for more! * * *





Nissan Maxima 10.85 @ 125mph Worlds Fastest
Worlds Fastest nissan maxima driven by Jime. 10.85 @ 125mph with Nitrous. The civic in the close lane red lighted big time, he was not that fast. The original video was deleted due to the music used in the video by YouTube. This one is all my own, so it will stay put.





P0505 Ecm IAC issue 2000 & 2001 Maxima and I30 Part 1
I know the video go messed up a little making this video. But this shows you whats involved to repair this issue. The other video's are much clearer. This is one of 5 video's





1997 Infiniti I30 idling problem
PLEASE READ THE DESCRIPTION This is the original description of the problem: This is my 1997 Infiniti I30t. I am currently having an issue with it idling while stopped and the car is in drive. It's hard to see in the video but the rpms drop about 100 every 5-20 seconds and cause a sharp vibration. It's very annoying and any help would be greatly appreciated. UPDATE: 10-19-2010, the car is now fixed for good hopefully. I went to a salvage yard and swapped out all of the coils for coils out of a low mileage 1998 i30 that had been totalled in a wreck. The car runs amazing now and I am very pleased with the results.





1999 Nissan Maxima SE idle problem
After the engine warms up, the car's computer lowers the rev's. When this happens, the car starts to "bounce" around 600rpm. It causes vibration and could become a big problem in the future. If anyone can help me diagnose my car, I will be very much obliged. Also, there is no check engine light on, so I can't diagnose that way.





How To Diagnose A Fuel Pump Failure - EricTheCarGuy
I had the privilege of visiting Airtex, and while I was there I spoke with Shane Neuman about diagnosing a faulty fuel pump. In this video we go over the basic steps of diagnosing a faulty fuel pump. So if your vehicle isn't starting and you suspect a fuel pump problem, here are some steps to follow to confirm your suspicions. Another 'quick' test is to bang on the fuel tank and then try and start the engine. Sometimes this works, just don't bang too hard, you could damage something. Airtex diagnosis webpage: http://www.airtexproducts.com/techresources1.html Here's a link to an article I wrote on diagnosing No Starts that you might also find useful: http://www.ericthecarguy.com/faq/solving-automotive-no-start-problems The best place for answers to your automotive questions: http://www.ericthecarguy.com Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.





1995-2001 Nissan Maxima: Spark plug replacement
How to remove and replace the spark plugs/coil packs on a 4th/5th gen Maxima. This is an updated video to replace the one from a few years ago that was completely washed out and didn't really cover the subject as well as I would have liked. Tools required are a 8mm socket (or phillips head screwdriver), 5/8" plug socket, extensions, 4mm allen key/bit socket for the front coil cover bolts, and a 12mm socket for the EVAP CPVCV (if so equipped).





Maxima no acceleration - cat converter/throttle body/MAF se
after drvin 30 miles the car will accelerate at most to 28 mph. no the tranny is not slippn imo. 2k max 117k miles.





2001 Supercharged Maxima walk around + exhaust clip
2001 Merlot Maxima Supercharged - 301whp with badly slipping auto trans Exterior: 03 front end conversion Blacked out headlights Blacked out grill Debadged grill Stillen front lip AE side skirts AE rear lip soon to come Blacked out window trim 35% tint Altima SER wheels Altima SER brakes Exhaust: Vortech V2 Supercharger 3.125 pulley (11psi) Blitz DD BOV OBX Exhaust Headers High flow cat Megan OE-RS catback





2001 Nissan Maxima AE Exhaust
2001 Nissan Maxima AE Cattman Headers -- Berk Intake -- Megan Racing B-Pipe -- 5.5 Muffler





Which car is faster? Which Car is Faster?




Similar 1/4 mile timeslips to browse:

1995 Nissan Maxima GXE Nitrous Auto: 10.851 @ 125.550
Jim Edwards, Engine: 3.5 2002 engine swap, Tires: M/T 22x8x15


1997 Nissan Maxima GLE: 11.400 @ 122.000
Streetzlegend, Engine: VQ35, Turbos: Borg Warner 366


1998 Nissan Maxima GXE Turbo: 11.495 @ 126.780
Matt P, Engine: VQ35, Turbos: TurboneticsT66 Tires: MT ET 26x10


1999 Nissan Maxima SE TURBO: 11.556 @ 120.130
Robert Tilley, Engine: VQ35de, Turbos: 67trim t3 stage 5


1996 Nissan Maxima SE Vortech Supercharger: 11.690 @ 120.490
Matt, Engine: VQ35DE, Supercharger: vortech


1999 Nissan Maxima se Turbo: 11.745 @ 117.160
Robert Tilley, Engine: VQ35, Turbos: To4r 67trim stage 5 t3 exhaust Tires: 26X9.5X16 hoosiers


1995 Nissan Maxima SE Turbo: 11.761 @ 121.300
Neal Clary, Engine: stock VQ30, Turbos: T61-Ptrim .82A/R Tires: 26x10.5-15 MT ET Street


1992 Nissan Maxima SE Auto ALL MOTOR: 12.058 @ 114.520
Aaron Kimball - NWP Engineering, Engine: VQ35DE Swap, Tires: MT Slicks 22 inch


2002 Nissan Maxima SE Nitrous Auto: 12.190 @ 111.820
Jim Edwards, Engine: 3.5L, Tires: M/T 22x8x15


1995 Nissan Maxima GXE N/A Auto: 12.346 @ 112.990
Jim Edwards, Engine: 3.5L, Tires: M&H 23x7.5x15


1998 Nissan Maxima SE: 12.610 @ 108.980
DandyMax, Engine: VQ30DEK (3L), Tires: M&H slicks


2004 Nissan Maxima SE Zex Nitrous: 12.801 @ 106.590
Kevin Crawford, Engine: 3.5L V6, Tires: Nitto 555R Drag Radials up front


1998 Nissan Maxima SE: 12.830 @ 106.900
DandyMax, Engine: VQ30DEK (3L), Tires: M&H slicks


2002 Nissan Maxima SE: 12.859 @ 108.000
Matthew Williams, Engine: VQ35DE, Supercharger: NA Turbos: Naturally Aspirated


1992 Nissan Maxima SE Automatic: 12.896 @ 104.559
Aaron Kimball, Engine: stock 3L DOHC 24V VE30DE, Supercharger: NA Turbos: NA Tires: 22x8x15 Mickey Thompson Slicks


1998 Nissan Maxima SE: 13.000 @ 104.380
DandyMax, Engine: VQ30DE w/ DEK manifold swap, Tires: M&H 24.5x15x8.5 slicks


2001 Nissan Maxima GXE: 13.275 @ 110.640
Bryan Kirkpatrick, Engine: 3.0L DOHC V6 Model: VQ30DE-K, Turbos: Turbonetics T3/T04E Tires: Dayton Daytona HR 215/60 15's


2002 Nissan Maxima SE N\A Auto: 13.325 @ 102.660
Jim Edwards, Engine: 3.5L, Tires: M/T 22x8x15


1995 Nissan Maxima SE: 13.326 @ 103.060
Stephane Theberge, Engine: VQ35, Supercharger: N/A Turbos: N/A Tires: 23X8.5X15 M&H slicks


1998 Nissan Maxima SE: 13.414 @ 103.480
DandyMax, Engine: VQ30DE w/ DEK manifold swap, Tires: M&H 24.5x15x8.5 slicks


 


©2014 DragTimes - Disclaimer - Contact Us