1965 Chevy c-10: Restored by 18 Year Old
This is my 1965 chevy c-10 half ton pickup. Has a 250 I6 with a 3 on the tree, and a single barrel carb that desperatly needs a rebuild. Anyways, have had this truck in the family for 20 years, and my dad gave it to me as a graduation gift just as a beater work truck (as we have been using it for years for a work truck). To his surprise I decided to restore it and it is now ten times nicer than we ever remember it! This is my first attempt at a restoration and I feel like I did a pretty good job for an 18 year old :) Please rate, comment, or subscribe and check out my other videos! Thanks and enjoy! https://www.facebook.com/tinman2kustoms https://twitter.com/Tinman2Kustoms
Chevy 250 inline six
Bobs 250 Chevy inline 6 DYNO pulls Straight six
250 Chevy, ross flat top pistons, 6" rods, balanced lower end. Built by Heckt Power. Parts supplied by www.12bolt.com 310 HP and still climbing! Torq is @275 near the start and is maintained to nearly the end of run. Head has 1.94/1.6 valves, bolt in intake port lumps are used. 1.75 roller rocker arms. The block is zero decked. Cam has 224/230 duraration @ .050 lift and .551 lift at the valves. Intake is a Clifford carb is a Edelbrock 500cfm This engine is almost at the max for this carb. Any more rpm and a 600 will need to be used.
250 Chevy Cleaning.wmv
Here's a 250 cid Chevrolet engine block that was sent in for cleaning and reconditioning. In this clip you will see how the cam bearings are removed and the block is thermally cleaned here at Costa Mesa R&D Automotive Machine. www.engine-machining.com (949) 631-6376