Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

How To Fix A High Idle - Clean Your Throttle Body

How-To fix a high idle. Or at least 1 possible problem, I'll show you how to clean your throttle body or butterfly valve. Or at least one possible solution if you are having this problem: When you start the car it is stuck in a high idle and revs at over 1000 rpms. This will work for any vehicle but is a common problem on my Jeep Cherokee and many other straight-6 I-6 Jeep engines. TJ YJ CJ XJ MJ Dodge Chevy Ford and the like. Need To buy Parts? Get them cheaper Here: http://www.bleepinjeep.com/discounts Website: http://www.bleepinjeep.com FaceBook: http://www.facebook.com/BleepinJeep Offroad Parks: http://bleepinjeep.com/offroad-parks Tee Store: http://bleepinjeep.com/store Donate: http://bleepinjeep.com/donate Coupon Codes: http://bleepinjeep.com/discounts *Disclaimer - This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee, wrangler, or any jeep vehicle. May be too intense for some viewers and children under 30 years of age. Please remain seated until the ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in jeep mirrors may be farther than they appear.*


 


More Videos...


How to Check Your Blinker Fluid
http://www.bleepinjeep.com/ - All the best Off-road videos of YouTube in one spot without all the boring stuff - Updated Daily!! In this video I will discuss how to check you blinker fluid. Many women and newbies forget to check and refill their blinker fluid with disastrous results. Make sure to watch this video on how it's done so this wont happen to you.





Idle Air Control Motor Cleaning For Wrangler
If the idling of your wrangler is unstable, You should clean the Idle Air motor & Hole. I spent 1Hour for this cleaning. I wish your wrangler keep good condition. Good Luck.





How To Find A Vacuum Leak - EricTheCarGuy
Vacuum leaks are one of the biggest causes of engine performance problems. This video is pretty straight forward in it's approach to finding a vacuum leak. On thing I might mention is that not all vacuum leaks are at the engine. Some HVAC systems run on engine vacuum and can cause a leak under the dash in some cases. I've even seen vacuum operated door locks. Just be sure to be careful spraying flammable stuff on a hot engine, you don't want to take one problem and make it a whole lot worse. You can also use a spray bottle with water to do this same test. It may not be as effective, but you don't have to worry about spraying a flammable substance on a hot engine. For more information on diagnosing engine performance issues, check out this article I wrote. http://www.ericthecarguy.com/faq/solving-automotive-performance-issues The best place for answers to your automotive questions: http://www.ericthecarguy.com Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.





Engine Overheating? - 9 Steps to Solve
Is your car engine overheating? Does your cars motor run hot? In this video, I explain how-to troubleshoot and diagnose an overheating engine in 9 simple steps. I show you how to tell if each system is working properly. This happens to be a cooling system from a Jeep Cherokee but the same rules apply across all makes and models including jeep, dodge, ford, chevy, toyota, and almost all others. 9 Steps: 1 - Clean Coolant? 2 - Radiator Debris? 3 - Leaks? 4 - Air Burp? 5 - Lower Radiator Hose Spring? 6 - Electric Fan? 7 - Thermostat? 8 - Water Pump? 9 - Fan Clutch? Need To buy Parts? Get them cheaper Here: http://www.bleepinjeep.com/discounts Website: http://www.bleepinjeep.com FaceBook: http://www.facebook.com/BleepinJeep Offroad Parks: http://bleepinjeep.com/offroad-parks Tee Store: http://bleepinjeep.com/store Donate: http://bleepinjeep.com/donate Coupon Codes: http://bleepinjeep.com/discounts *Disclaimer - This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee, wrangler, or any jeep vehicle. May be too intense for some viewers and children under 30 years of age. Please remain seated until the ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in jeep mirrors may be farther than they appear.*





Jeep Tech: How to renew you IAC(Idle Air Control) and improve idle
Here is a Quick walk-though on how to clean up you IAC. Cleaning this will give you better Air/Fuel Ratio at idel and help or eliminate problems such as: High Idle Dies at Idle Dies when stopping and a few others





How to Replace a Valve Cover Gasket
In this video we'll show you how to replace a valve cover gasket. This happens to be a Jeep Cherokee but it should be pretty similar for any make and model. Share your videos and earn $$$$ here: http://bleepinjeep.com/submit-vids Need To buy Parts? Get them cheaper Here: http://www.bleepinjeep.com/discounts Website: http://www.bleepinjeep.com FaceBook: http://www.facebook.com/BleepinJeep Offroad Parks: http://bleepinjeep.com/offroad-parks Tee Store: http://bleepinjeep.com/store Donate: http://bleepinjeep.com/donate Coupon Codes: http://bleepinjeep.com/discounts Click here to License this video: http://bleepinjeep.com/licensevideo *Disclaimer - This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee, wrangler, or any jeep vehicle. May be too intense for some viewers and children under 30 years of age. Please remain seated until the ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in jeep mirrors may be farther than they appear.* 09521





How To Fix A Car That Idles Poorly
How to clean a throttle body and Idle air control valve (iac), How to fix a rough idle, running crappy, stalling, low idle, and high idle. ***This shows you how to potentially fix a high idle, low idle, and or rough idle. Most modern cars have an idler air control valve (IAC) that can get gummed-up and you have to clean it. Be aware that unplugging the IAC can trigger a check engine light (use a scanner or disconnect the battery to get rid of the light). If you have any questions feel free to ask below. If this helps also let me know (I like to know when I help someone out!). Codes that can be triggered are, P0401, P0505, P P0507 This video shows how to remove, clean and reinstall your IAC (Idle Air Control) and save a lot of money. This method can be transferred to just about any car with an IAC. The car in the video is a 2001 Ford Ranger or Mazda B3000. **If the video helped, please give it a "thumbs up" and consider subscribing. Leave any questions or comments below and I will answer them as well.** Follow me on Facebook: https://www.facebook.com/chrisfix8 Follow me on Twitter: https://twitter.com/ChrisFixed Subscribe: http://www.youtube.com/subscription_center?add_user=paintballoo7 How to Quiet a power steering pump https://www.youtube.com/watch?v=BD3PTy2B1EI P0401 EGR Valve Port Cleaning, How to, ford ranger, mazda b3000, mazda, ford, truck, car, idle, poor idle, rough idle, hard idle, low idle, stalling, erratic idle, iac, idle air control valve, idle air control, fix, clean, honda, chevy, toyota, nissan, Chrisfix, Chris Fix Disclaimer: Due to factors beyond the control of ChrisFix, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. ChrisFix recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not ChrisFix.





Jeep Cherokee XJ climbing the unthinkable - Carnage Canyon (HD)
A sick Jeep Cherokee climbing the exit on Carnage Canyon without a winch. Huge ledges on soft dirt made this something you have to see to believe. Built and driven by TnT Customs





BleepinJeep Walkaround
http://www.bleepinjeep.com/ - All the best Off-road videos of YouTube in one spot without all the boring stuff - Updated Daily!! A walkaround of BleepinJeep. Ya its pretty ugly but I had too many requests for a walkaround that I couldn't get around it... no pun intended.





Honda-Acura Surging Idle Speed (case study)
What causes a surging idle speed on a Honda or Acura? How to determine if the cold fast idle valve is operating properly. How to adjust a cold fast idle valve. How to test the IAC solenoid.





How to clean a throttle body and Idle air control valve (iac)
*** PLEASE READ *** In this video demonstration, I show how to get to, remove, clean, and replace the throttle body and idle air control motor (aka IAC) on a 4.2l ford motor. This procedure is the same for any fuel injected vehicle. * * * Check out my website krkvideos.com * * * The vans require removal of alot more stuff just to access the throttle body. A dirty IAC can cause a rough idle. A dirty throttle body can harm performance and cause rough engine operation. When the throttle body or iac is removed a new gasket must be used to properly seal the connection to the intake. GM idle air motors are generally mounted on the throttle body and can be cleaned without removal from the throttle body. This means one less gasket and a lesser chance of creating a vacuum leak. The ford throttle body had a note on it that said it was not to be cleaned because the coating on the throttle blade might be damaged. Thats fine for a new car but that has to be disregarded when working on something that has some miles on it. Subscribe to my channel. * * * Definitions: * * * MAF - Mass Air Flow sensor - Monitors the amount of air the engine is intaking. IAT - Intake Air Temperature - Measures the temperature of the air the engine is intaking. IAC - Idle air control - Controls the amount of air the engine is intaking while it is idling. Throttle body - Responsible for regulating flow of air into the engine as you press the gas pedal. TPS - Throttle position sensor - Tells the computer how far you are opening the blade in the throttle body so it can add more fuel to compensate the added air. * * * Visit krkvideos.com for more! * * * * * * Visit krkvideos.com for more! * * * * * * Visit krkvideos.com for more! * * *





Quick Tip-Throttle Cleaning - EricTheCarGuy
This one goes out to BowlingBallOut who posted a question about a sticky throttle on his Saturn. It was a great question so I decided to make this video in response to it. There are many different configurations of throttle assemblies but for the most part if you have a throttle that is sticking you might be able to fix it using the procedures in this video. I am aware you may not able to purchase spray throttle cleaner in some states now but I'm sure they have some alternative available at your local parts store. One very important note here is that if you have a drive by wire throttle (DBW), then I do NOT recommend this procedure. If you perform this procedure on a DBW throttle body you may need to have the throttle reset in order to get your engine to idle or even start. I only recommend this procedure if you're trying to correct a problem with a sticking throttle. If you have idle problems, I recommend you check out this article on my website. http://www.ericthecarguy.com/faq/solving-automotive-idle-problems The best place for answers to your automotive questions: http://www.ericthecarguy.com BowlingBalOutl's channel http://www.youtube.com/user/bowlingballout Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.





Spectacular American Fork Canyon, Utah, Mineral Basin 4x4 trail, Jeep XJ, Jeep JK
This canyon is a 10 minute drive from my home. I tagged along with a group of Jeep XJs July 2011 going up American Fork canyon. The snowpack is still visible and it was fun driving through the runoff. This trail was blocked by a 6 foot deep snowbank that for us could not be overcome.





How To Solve Honda Idle Problems - EricTheCarGuy
Visit me at: http://www.ericthecarguy.com/ Before posting questions about Honda idle problems please read this: http://www.ericthecarguy.com/forum/8-Service-and-Repair-Questions-Answered- Here/41476-solving-honda-idle-issues-hunting-idle The viewers have chosen and this weeks video will be about solving Honda idle problems. I'm really not surprised as I get a lot of questions and requests about this very subject. Here are the links I promised in the video that will help you address specific issues mentioned in the video. How To Bleed a Cooling System http://www.youtube.com/watch?v=zUpXgAJ1gjU How to Check for Vacuum Leaks http://www.youtube.com/watch?v=9CPqbaSgcok Reading Check Engine Light Codes http://www.youtube.com/watch?v=BD05sPclLyE Diagnosing an Overheat http://www.youtube.com/watch?v=hUzOTnsWImI Hopefully when your done checking all that stuff out you will have solved your Honda's idle problem, if not leave a comment or send me a message and I'll see what I can do just make sure you have tried all the stuff in the videos first as that saves me from typing so much. I also want to add my "Idle Speech" into the mix here: http://www.ericthecarguy.com/forum/8-Service-and-Repair-Questions-Answered- Here/41475-solving-honda-idle-issues-rough-idle   There are a lot of things that can contribute to an idle issue, in fact in the end it may still be there to some degree because of the nature of that engine however here are some things to start with. First start with a good tune up, use NGK or Nippon Denso plugs, don't change the wires if they are OE, if they aren't OE you might consider NGK wires as they are very good and less expensive then OE.  A quality cap and rotor should be good.  A new air filter also helps. Don't change the PCV valve, if you see an aftermarket PCV valve in there put a Honda in, believe it or not I've seen idle issues caused by aftermarket PCV valves, the OE's last just about forever so you can easily justify the expense. Next a good valve adjustment, this goes a long way to smooth out the idle if done correctly, mess it up and things can get a lot worse though. While you have the valve cover off check the timing belt tension, if you feel a lot of slack this can cause the cam to 'chunk' as it spins causing a rough idle.  If you think the belt has been on there for some time then you might consider changing it and resetting the tension properly, if it's not ready for replacement you can reset the tension to take up the slack. DO NOT adjust the idle screw under any circumstances, it is set at the factory and that is the reason it was sealed in the first place. If you find that the seal has been broken and you have a low idle and you have done all of the above then you might turn the screw out a little to see if that helps the idle but only enough to try and bring it back to where it was before it was adjusted in the first place. Last clean the screen in the Idle Air Control valve, this can get clogged up with carbon over time and cause the flow through it to be restricted which can cause idle issues. If you still have a 'rough' idle after all of this THEN look to the engine mounts as you want to be sure the engine is running correctly before you go for those as the one in the back is a real pain to replace. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.





High Idle Troubleshooting
Throttle position sensor High Idle Troubleshooting





Which car is faster? Which Car is Faster?




Similar 1/4 mile timeslips to browse:

1994 Holden HSV Clubsport: 11.500 @ 135.000
santo, Engine: 355 Stroker 5.0l V8, Supercharger: STA


2000 Holden HSV VX Clubsport R8: 11.765 @ 112.600
Steve Bennett, Engine: LS1, Tires: 235/60 x 15 ET Street Radials


2005 Holden HSV VZ Maloo R8: 11.950 @ 115.000
Neil Venables, Engine: LS2, Supercharger: no Turbos: no Tires: stock


2011 Ford Flex Titanium Ecoboost AWD: 12.386 @ 112.000
Mike Bambic, Engine: 3.5L Ecoboost, Turbos: Upgraded stock turbo with billet compressor wheel Tires: 26x8x17 M&H slicks front, cheap 225/55/17 rear


2011 Ford Flex Flex: 12.472 @ 109.140
Mike Bambic, Engine: 3.5L Ecoboost, Turbos: Upgraded stock turbo with billet compressor wheels Tires: 26


2011 Ford Flex Titanium Ecoboost AWD: 12.520 @ 113.000
Mike Bambic, Engine: Ecoboost, Turbos: Stock Tires: 245/45/20 All Season


2011 Ford Flex EcoBoost Limited Livernois Stage 5 Tune: 12.727 @ 109.790
John Stachlewicz,


2011 Ford Flex EcoBoost Limited: 12.890 @ 108.300
John Stachlewicz, Engine: EcoBoost 3.5 V6,


2011 Ford Flex Limited with EcoBoost: 12.949 @ 107.660
John,


2005 Kawasaki Vulcan MEAN STREAK 1600: 13.004 @ 99.760
DAVE,


2011 Ford Flex titanium: 13.060 @ 105.750
gilles gaudreau, Engine: v6 ecoboost, Turbos: twin Tires: stock


2011 Ford Flex Limited with EcoBoost Stage 3 Tune: 13.542 @ 100.830
John,


2005 Holden HSV VZ - Maloo R8: 13.610 @ 99.000
Tim Munro, Engine: LS2 - 6.0 litre, Tires: Pirreli P- zero's


2011 Ford Flex Limited Ecoboost: 13.649 @ 101.580
Stephen F. Selden, Engine: 3.5 V-6 Ecoboost, Turbos: stock twin


2004 Holden HSV Maloo - R8: 14.062 @ 99.540
Tim Munro, Engine: 5.7 litres, Tires: Pirrelli P -zero's


2010 Ford Flex Ecoboost Limited: 14.151 @ 98.610
Mike Bambic,


2011 Ford Flex Limited with EcoBoost: 14.236 @ 97.870
John,


2011 Ford Flex Limited Ecoboost: 14.627 @ 96.050
Stephen F. Selden, Engine: 3.5 ecoboost,


2004 Kawasaki Vulcan 500 LTD: 15.439 @ 83.370
Michael E. Kline, Engine: 498 cc twin, Supercharger: no Turbos: no Tires: 195/19 front, 15 rear


 


©2015 DragTimes - Disclaimer - Contact Us