Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

Holden Gemini - Race Hack To Road Car In 2 Weeks - Introduction

The Challenge: To turn a $400 former turbocharged drift racer into a registered road car in only 14 days. At the end of the two weeks the car will be put on the road and driven to "The Buyer" The Car: A 1975 Holden Gemini (TX) Sedan The Budget: What budget? The Deadline: 17th of February 2009. The Insanity: Too much for just one video. This fortnight long project will have daily vlog updates, so subscribe to keep updated. -Introduction video showing the car and the task at hand- Enjoy


 


More Videos...


My gemmy
Hey guys this is my TG SLX, this video is the first of many to come on the build up of my car , feel free to email me your gemmy related stuff. Ausgemcollective@gmail.com and I'll upload it. Cheers!





Holden Gemini Drift Car (Isuzu G200W) First Drive
To continue on from the first start video, I refitted a diff and got it running reasonably nicely (needs a little more work to help it idle), I drove it under it's own power for the first time since owning the car. Not much left now before it'll be out there going sideways.





Holden Gemini 2 Week Challenge - Day 1
The Challenge: To turn a $400 former turbocharged drift racer into a registered road car in only 14 days. At the end of the two weeks the car will be put on the road and driven to "The Buyer" The Car: A 1975 Holden Gemini (TX) Sedan The Budget: What budget? The Deadline: 17th of February 2009. The Insanity: Too much for just one video. This fortnight long project will have daily vlog updates, so subscribe to keep updated. Day 1 - Old engine out, several other small jobs identified Enjoy





Holden Gemini Drift Car (Isuzu G200W Twincam) First Start!
After weeks of solid work, and waiting patiently for a new TPS, I got my rebuilt twincam, bought back in 2010, running for the very first time. This will be the temp motor for my drift Coupe while I build up a forged SOHC G series motor. Bought with all the receipts from the rebuild, this 2 litre G200W from a Piazza was Dynoed with 64rwkw with the Wolf 3D aftermarket computer. Not much, but enough to have fun in. Now comes fine tuning and finishing a few small areas off before it's shakedown. Bring on 2013!





13/10/12: Holden Gemini Project Series Begins Again!
Been a while, a lot has changed, and yet some things never change... After another long hiatus (due to uploading issues), it is time to let you guys in on what I've been up to lately. A few cars have gone, others have taken their place, and I am now working from a new location. Lots to do in the coming weeks, so I'll do my best to update regularly once more.





Street And Track Geminis - My Holden Isuzu Gemini Collection
Catch us on Facebook . https://www.facebook.com/pages/Street-and-Track-Geminis/128389497247159





tg gemini before/after
this is my tg gemini from when i first got it, till today, its unfinished still needs a roll cage, fuel pump and shitload of other things, so far its got a ct20 turbo on custom manifold, weber 32/36 carby setup for turbo, malpallsi regulator, front mount Intercooler, welded stock diff, 15 inch gold interceptors with vy hubcaps, whole car painted matte black, bucket seats, stripped interior, the list goes on and on :D enjoy





MR SIK - 1983 Holden Gemini
Click LIKE/SHARE!!! Behind the scenes video with Laurie Seguna and his "Mr Sik" 1983 Holden Gemini. See more photos and read the full feature on Laurie's Gemini at http://www.freestylerides.com/mr_sik.htm Check "Mr Sik" out at Meguiar's MotorEx, Sydney Olympic Park 23rd & 24th of July 2011. http://www.motorex.com.au





Holden Gemini
My old Gemi on the front lawn... it is now black, turbo 1.6, full cage, locked diff and new owner :)





DA9 project prt2
tranny removal/rear suspension upgrade plz comment/rate 5 stars thanks





TIMELAPSE - How to clean a mechanic shop fast and efficiently
time lapse 6 hours, cleaning Community Automotive Repair in Grand Rapids, MI





Holden Gemini Turbo
VG30E turbocharged Gemini, Stock 9.1 maxima long block, custom headers, custom intake, holset hx35 turbo, stock Boost(7psi). Greddy EBC.





1979 Holden Gemini Sound Test #3 - Standard VS Aftermarket Cam
Same car as the previous sound test from last year, only now a 2 inch system and extractors replaces the stock system with hotdog and cannon. Bought the new Exhaust in January for a steal at only $25! First vid is with a standard cam installed; flat idle. Second vid is with a "Crow" 2509 or Stage 3 Billet Cam installed. Got for free in the decompressed 1600 motor from the 2 week challenge car earlier in the year. Enjoy





2Ltr Holden Gemini Burnout
My old Gemini smoking up a double legger. Was running a Rodeo 2ltr with warm cam, valve work etc. For some reason the tyred didnt smoke much could be because the tyres where about a centery old.





Clean Holden Gemini
My 2.0L Holden Gemini, slammed on 18"s slightly worked 2L with 1.6 head for high compression, webber carbi, stage 2 crow cam, extractors, heavy duty clutch, 5spd, elec ingnition, bmw 4 piston brakes on the front ect.




Which car is faster? Which Car is Faster?





Similar 1/4 mile timeslips to browse:

1975 Holden Gemini Coupe: 9.022 @ 150.300
Stuart, Engine: s.b.c. 406, Tires: Mickey Thompson


1982 Holden Gemini TG: 9.820 @ 139.900
Darren Hunter, Engine: 1800cc, Turbos: GT35 Tires: M&H 24.5 x 8.5 x 15


1982 Holden Gemini TG (16OTU): 10.732 @ 132.240
Ron Lange, Engine: 1ggte, Supercharger: N/A Turbos: T04R Tires: Radials 195x50x15 & Toyo RA1's 225x50x15


1982 Holden Gemini SLX: 14.050 @ 98.790
Jim, Engine: 308 V8, Tires: Bridgies


 


©2014 DragTimes - Disclaimer