Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

BL30A Directional LED Deck Light Bar

BL30A Directional LED Deck Light Bar from 1stResponderWarehouse.com


 


More Videos...


180w LED Spot light bar and 27w LED flood lights
Sorry for saying "um" about a thousand times!!! These are some lights that I just added to my Jeep. NOTE: The output in this video is not even close to the real output! The flood lights alone shine Follow my instagram: http://instagram.com/alexosbourn





Off Road Jeep & Vehicle LED Light Bars - LAMPHUS ® Cruizer ™ Product Review & Night Drive Demo
http://www.online-led-store.com The LAMPHUS® Cruizer™ offroad LED lightbar is the perfect auxiliary light for off road vehicles, ATV, and motorcycles. In additional to off road usage, the Cruizer™ could also be used under demanding environment including construction, material handling, agricultural, forestry, and other applications where a reliable light output would be needed. Incredibly resistant to dust, water, shock, and vibration, the Cruizer™ comes with an over-sized cast aluminum heat sink while illuminating the terrain with CREE® LEDs. The Cruizer™ is available in spot (30°) and flood (60°) variations. Sizes include: 4", 7", 12", 20" & 36". For any inquiries, please email us at support@online-led-store.com





Installation of a 30" LED light bar from Bulldog. Mounted on a 2011 Ford F250 Super Duty
Like us on Facebook @: https://www.facebook.com/BlinkAutomotive This is an installation of a 30" LED Lightbar from Bulldog Lighting. This bar is extremely bright, and the best choice for offroading enthusiasts. Please visit www.Bulldog-Lighting.com for more information and to order! 30" Bone Series LED Light Bar - 12000 Lumens - Outside dimensions of 31 1/16 x 3 1/8 x 3 1/8 -- 16 lbs -- Lumens:12000 Lumens - BD30 Product Specifications: Voltage Input: 9~42v - Operating Temperature: -49 to 185°F - LEDs: High Powered 3w LEDs - Drawing 180 Watts - LED Color: White,Yellow, Blue, Red - LED Life: 50,000hrs - Style: 2 x Horizontal Rows - Body: Stainless Steel Mounts with Rubber Cushion; Beam Patterns: Flood, Spot, or Combo Beam; Housing Color: Black(flat paint) Custom Colors Available* Housing Type: Aluminum Body - Waterproof: IP68





LAMPHUS® SolarBlast™ 36" 32W LED Traffic Advisor Emergency Vehicle Strobe Warning Lightbar Part II
http://www.online-led-store.com This LAMPHUS® SolarBlast™ SBTA84 36" 32W LED Emergency Vehicle Strobe Warning Lightbar with Traffic Advising Functions is composed of eight high intensity LED light blocks for an intensely bright warning signal. This unit comes complete with a Quick Directional Controller which can advance the unit to one of its three directional flash patterns with a press of a button (Left, Right, or Center Out). With 19 selectable flash patterns and being suitable to be mounted to vehicle of all sizes, this versatile strobe light unit will grant emergency personnel with the ability to alert oncoming automobiles with the correct flow of traffic. For any inquiries, please email us at support@online-led-store.com





240 Amber LED Mini Strobe Light Bar
www.hk5motors.com Only requires a cigarette lighter to install. Bottom of the bar have magnets to easily post on top of the vehicle 7 Modes of strobe with just a push of a buttom





Whelen Liberty LED Lightbar
Whelen Liberty LED Lightbar http://www.sirennet.com/ledliberty.html The new LFL Liberty features the next generation, all Linear-LED technology in a warning package that rivals strobe inimpact, but provides heavy-duty, long life operation with low, low current draw. All Liberty lightbars are made for the rough treatment and long hours that your job demands. � Up to 14 Linear-LED�s - choose from any combination of Red, Blue, Clear and Amber. � Optional LED Alley lights � Optional LED Take Down lights � All Linear-LED ultra bright, ultra wide-angle LED technology. � Sleek, aerodynamic profile with state of the art optics. � Scanlock technology allows you to change flash patterns on the fly. � Low current operation uses small diameter external cable harness. � Traffic Advisor and cruise light features included. (requires optional LED modules) � Traffic Advisor Control available below. � Upgradeable with additional premium (6 LED version) inboard linear LED's that quickly snap into your existing wiring harness.





Coordinated Emergency Lighting System from Code 3
Imagine taking the programmability of a lightbar and applying it to all of the emergency vehicle lighting. Introducing the CELS system from Code 3.





2007 F150 Emergency Lights
Updated vid of the lights in my truck...and higher quality than the last. Front: Undercover Vizor UV30 Red/Red, Galls Dual TN Red/Red, 2 Axixtech SLED3s Red Side (per side): 2 Axixtech SLED3s Red, 1 Axixtech SLED4 Red/White Rear: 4 Axixtech SLED3s Red Siren: Code 3 V-Con Siren w/ 100W Galls Concealment Speaker





LTF4C408 LED Directional Lightbar for EMS and police
Powered by 12V 11 feet of cable provided 16 available flash patterns Life Span of 100,000 hours Anti-glare coating on outer lens Dimensions: 100cm L x 10cm W x5cm H Runs on Generation 3 LED lighting 8 modules with 8 linear LEDs in each Includes control box with On/off switch Includes L-shaped brackets for mounting Flash pattern & Directional changer included





All lights on
All lights on





Crazy Lights LED indirect lighting for the ceiling.
Installed 4 strings of LED crazy lights on the back of the crown molding in the tray of our sunrooom. These are awesome for the money. Comes with a power supply and a controller that has 132 different patterns on it. Just stuck them to the back side of the crown molding with some 3M double sided tape. You can get these from a company called ledlightshack.com.





LED Visor light---LV100
1W LED





Federal Signal Mini ILS LED Deck Lights
Mini ILS 9 LED Heads in Full ull sunlight. Red/Blue





Led deck dash lights, bright police lights, Emergency vehicle lights, warning lights, Feniex
The python series comes in a 2 light head all the way to a 10 lighted. Under an inch tall and powered with 4, 4-watt Phillips engineered LEDs, the Python series provides intense light output in a sleek, thin frame. The series is fully customizable on our site at www.feniex.com. Visit and build your own bar!





HL6 Grille and Surface Mount LED Emergency Vehicle Light
http://www.911signalusa.com/hl6-hornet-led-lighthead-p-50.html In this video, viewers can watch as Mike, our personal emergency vehicle lighting installation expert, installs HL6 Grille and Surface Mount LED Emergency Vehicle Lights on our 2013 Dodge Charger demo vehicle. Mike has chosen to install the grille lights, which are popular police lights, around the license plate of the Charger. Doing this helps illuminate the rear of the vehicle, which can be influential in reducing the risk of rear-end collisions. Step 1: Mike Drills Holes around the License Plate As you can see in the video, Mike drills one hole on each side of the license plate for the grille lights. Before, our installer drilled the holes, he checked to make sure the holes were even. This is a critical step because once you have drilled the holes, it can be nearly impossible to start over. Step 2: Begin Feeding the Wire through the Holes Once the holes are drilled and Mike is sure the holes are even, he begins feeding the HL6 wire through the holes and checks the placement of the lights on the Charger. Step 3: Preparing the Lights for Final Installation After placement has been checked, it is time to prepare the grille lights for permanent installation. This includes hardwiring the lights, cauterizing the wires, to ensure the wires won't come loose, and covering the wires with electrical tape. For more details about this product, check out the video (0:31). Hot Installation Tip: Once the wires have been covered with electrical tape, make sure to heat the tape up, just like Mike does in the video. Heating up the tape will ensure the tape will not come loose. However, it is important to not overdo it, or you could end up repeating the entire process all over again. Step 4: Lights are Ready for Permanent Installation At this point, the surface mount lights are ready for permanent installation on the vehicle. To see Mike complete this process, check out the video (0:59). When preparing the light to be placed against the surface of the vehicle, don't place the cover over the light until the wire is nearly completely feed through the drill holes. Once the wire is feed through and the light housing is placed over the light, Mike is ready to install the light. To do this, he drills the light until it is tight against the body of the vehicle. It is important that the HL6 is screwed tightly to the body, so that it will not come loose during heavy duty use. Step 5: Connect Wires to Switchbox Our Charger's switchbox is located conveniently in the trunk. To see Mike connect the wires of the grille lights to the control box, tune in at (1:16). While watching the video, viewers can see that Mike takes his time carefully placing the wires around the swtichbox. In fact, he periodically stops to tie the wires together, so that the equipment is easier to store and deal with if needed. Step 6: HL6 Grille and Surface Mount LED Emergency Vehicle Lights are Ready to Go Voila! That's it, the grille and surface mount lights are ready to go. Installation Tips from our Resident Expert: If you have never completed this type of installation before, you are probably thinking "that looks easy enough." While it is true that these warning lights are easy to install, it does take a bit of experience and elbow grease to make it as easy as Mike makes it look in the videos. However, there are a few tips that viewers should keep in mind to make sure their installation goes smoothly. 1. Inspect all equipment as soon as it arrives and familiarize yourself with the components. 2. Locate the manufacturer instructions and read through them before beginning the installation. 3. Check all holes before drilling, and then double check. 4. Remember that your installation could vary from ours. If you have any questions about this video, the HL6 Grille and Surface Mount LED Emergency Vehicle Lights, or any of our other products, please feel free to comment here or contact us directly. Follow Us On Your Favorite Social Network! Facebook: https://www.facebook.com/911SignalUSA Twitter: https://twitter.com/911_Signal_USA Google+: https://plus.google.com/117281127414749163053 Instagram: http://instagram.com/911signalusa#





Which car is faster? Which Car is Faster?




Similar 1/4 mile timeslips to browse:

1987 Buick Regal Turbo-T: 8.690 @ 158.460
Dan Strezo, Engine: 274 c.i., Turbos: T88-T4 Tires: MT 29.5x10.5 Non-W


1986 Buick Regal Grand National T-type: 8.900 @ 154.000
Jack Cotton, Engine: 4.1l, V6, Turbos: single Turbonetics T76 Tires: MT 29-10.5-15


2005 Ford GT Twin Turbo Supercharged Nitrous M2K Motorsports: 9.501 @ 152.490
M2K Motorsports, Engine: 5.4L V8 Supercharged and Twin Turbo, Supercharger: M2K Motorsports Turbos: M2K Motorsports


1984 Buick Regal : 9.610 @ 146.000
BAZTEK,


2005 Ford GT Supercharged Twin Turbo Nitrous: 9.721 @ 149.840
Mullet, Engine: 5.4L Supercharged Twin Turbo V8, Tires: 305/35/19 ET Streets


1981 Buick Regal GS: 9.980 @ 139.071
RONALD BEY, Engine: 494 ci, Tires: FUTURA


1987 Buick Regal : 10.200 @ 132.120
Rich Lenz, Engine: 454, Supercharger: none Turbos: none


1986 Buick Regal : 10.270 @ 132.970
Bob Heinz,


2005 Ford GT Twin Turbo Supercharged: 10.270 @ 146.480
Mullet, Engine: V8 Supercharged and Turbocharged,


2005 Ford GT Twin Turbo: 10.480 @ 144.950
moeinox, Engine: V8 Twin Turbo, Tires: drag radials


2005 Ford GT Pulley, Tune, Exhaust: 10.636 @ 132.210
FikseGTS, Engine: 5.4L Supercharged V8, Tires: Bridgestone Potenza RE050A


2005 Ford GT Pulley and Tune: 10.637 @ 133.210
typeshatch, Engine: V8 Supercharged 5.4L, Supercharger: Pulley 2.75 Tires: drag radials


2005 Ford GT PPR Twin Turbo: 10.650 @ 155.310
PPR, Engine: V8 Twin Turbo,


2005 Ford GT Heffner Tune Pulley: 10.696 @ 135.270
Jamie, Tires: stock factory tires


1986 Buick Regal T-Type WH1 Designers Series: 10.750 @ 122.000
Banning Cohen, Engine: .040 over stock block 3.8v6, Turbos: PT67 Tires: 28x11.50x15 Hooser QT Pro


2005 Ford GT : 10.920 @ 128.000
NA,


2005 Ford GT Ford Racing Pulley and Tune: 10.920 @ 130.230
hmg_57, Engine: Supercharged V8, Supercharger: Ford Pulley Tires: 18


2005 Ford GT : 11.020 @ 130.000
NA,


2005 Ford GT Heffner Twin Turbo: 11.101 @ 139.020
NA, Engine: V8 DOHC 32 Valve Twin Turbo, Turbos: Twin Water Cooled Dual Ball Bearing 61mm Turbos


2005 Ford GT : 11.200 @ 131.200
NA,


 


©2014 DragTimes - Disclaimer