How To Fix Exhaust Rattles - EricTheCarGuy
Visit me at: http://www.ericthecarguy.com/
As long as we are on the subject of Exhaust I figured why not solve the rattle I've
had in the Subaru Exhaust since I got
the car. This is a simple affordable method that has never let me down,
remember if you need to do a large shield you can always string together
more hose clamps.
Click below and Stay Dirty
Visit me at EricTheCarGuy.com
Visit EricTheCarGuy Forum
Visit my Facebook Page:
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee
against unauthorized modifications of this information, or improper use of
this information. EricTheCarGuy assumes no liability for property damage
or injury incurred as a result of any of the information contained in this
video. EricTheCarGuy recommends safe practices when working with power
tools, automotive lifts, lifting tools, jack stands, electrical equipment,
blunt instruments, chemicals, lubricants, or any other tools or equipment
seen or implied in this video. Due to factors beyond the control of
EricTheCarGuy, no information contained in this video shall create any
express or implied warranty or guarantee of any particular result. Any
injury, damage or loss that may result from improper use of these tools,
equipment, or the information contained in this video is the sole
responsibility of the user and not EricTheCarGuy.
Excursion on boggers jeep rescue 3
still pulling broken jeep..almost out
Jeep had a broken front axle and broken rear driveshaft.
jeeps winch was also broken
excursion is V10 on 44" boggers with 8" lift
***there is no winching in this video***
Ford 4.6l 3v & 5.4L 3v Camshaft Phaser Knocking Noise Fix
In this video I detail Camshaft Phaser repair on the 5.4l 3v engines but
the procedure is the same for the 4.6l 3v engine.
Torque to 30 ft lbs then an additional 90 degrees.
The crankshaft is always being turned in a clockwise direction until the
last positioning of the crankshaft in which we spin it counter clockwise
Proper positioning of cam lobes for roller follower removal.
RH Bank Cylinder 1-
LH Bank Cylinder 5-
Valve Cover Torque 90in lbs Sequence-
Old LH Valve Cover-
Old RH Valve Cover-
New LH Valve Cover-
New RH Valve Cover-
Ford Excursion 4x4 "FORDzilla" Triton V10 6.8L 54" tires
New project's first test drive. Tested suspension and engine. Further
upgrades and body armouring to come.
The truck represents Yuzhno-Sakhalinsk Off-Road Club (www.sakh4x4.ru).
Машина в стадии ПОСТРОЙКИ! Это первые
Обсуждение данной машины здесь!
2014 Ford Raptor 6.2L vs F-250 6.2L Mashup Ike Gauntlet Towing Test ( Part 1)
( http://www.TFLtruck.com ) The 2014 Ford SVT Raptor does not directly
compete against the Ford F-250. But in this case both trucks have one
significant thing in common...they both come equipped with the same Ford
6.2L engine. In fact the Raptor's 6.2L V8 is tuned with a few more ponies
from the factory. So how do these two different trucks with the same engine
compare when it comes to towing. We decide to find out by taking both
trucks up the TFLtruck Ike Gauntlet Mega towing torture test in classic
The Ike Gauntlet is a timed run up one of America's steepest highways from
9,000 feet above sea level to the top of the mountain at entrance to the
Eisenhower Tunnel in Colorado. Check out this promo for what's coming up
soon on The Fast Lane Truck.
Check us out on:
Facebook: ( https://www.facebook.com/tfltruck )
Twitter: ( https://www.twitter.com/tfltruck )
and check out our car videos on YouTube at:
The Fast Lane Car ( http://www.youtube.com/user/romanmicagearguy )