Viair onboard air system - install and overview
This is a full install video of a Viair Ultra Duty onboard air system. This
system was installed on a 2011 Super Duty, and powers a train horn, and QD
fitting for air tools. This system is 200PSI
Don't forget to ALWAYS have your vehicle running while using the
Get yours at: http://www.viaircorp.com/oba-ultra.html
VIAIR 70P Portable Compressor (P/N 00073)
The 70P Portable Compressor from VIAIR is the perfect tool for inflating
compact and mid-size car tires.
Featuring a 150 PSI Pressure Gauge, 3pc. Inflation Tips Kit, Accessory
Power Plug, and a Deluxe Carry Bag, this air compressor is capable of
inflating 225/65/R18 tires or lower.
1. Plug the accessory power plug into your vehicle's power outlet and start
the engine to provide charging voltage.
2. Remove the valve stem cap, attach the end of the air hose to the tire
valve stem and secure it by tightening the twist-on chuck.
3. Power on the compressor by pushing the ON switch on the front of the
compressor. The tire will now inflate. Make sure you don't over-inflate
the tire past its recommended pressure, as doing so can damage your tire
and may cause serious bodily injury.
4. When the pressure gauge indicates the desired pressure, switch the unit
OFF and remove the air hose from the tire valve stem.
5. Finally, place the cap back on the tire valve stem and unplug the power
cord from the outlet.
VIAIR's 70P Portable Compressor makes tire inflation easy and affordable to
help ensure your vehicle is in optimal running condition.
VIAIR 70P Portable Compressor (P/N 00073)
1.27 CFM @ 0 PSI
15% Duty Cycle @ 100 PSI
195/70R14 Fill Rate:
0 To 30 PSI 2 Min. 55 Sec. (+/- 10 sec.)
15 To 30 PSI 1 Min. 45 Sec. (+/- 05 sec.)
225/60R18 Fill Rate:
0 To 30 PSI 4 Min. 22 Sec. (+/- 10 sec.)
15 To 30 PSI 2 Min. 10 Sec. (+/- 05 sec.)
Superflow MV90 verses MV50 Air Compressor comparison
This video is a side by side comparison used to illustrate the performance
differences between the SuperFlow MV90 and MV50 12-volt Portable Air
Compressors. Because of additional hoses and fittings required for the
test, actual performance of the units when used individually is better than
what you see here. The test truck is an 2008 F250 Super Duty Diesel with
275-70-R15 Tires. Both units come with a nylon carry bag and coil air
hoses. Newer models are equipped with type M air fittings making it easy
to use your own hoses. Caution -- These compressors are designed to
provide continues flow of air. Never use a hose set-up that dead ends the
flow of air.
Replacing Headlights: Jeep Repairs Grand Cherokee WJ
I tried two different headlight restorers (twice for each) and was not
satisfied with the increase in my headlights brightness. So I went bought
this set of headlights from EagleEyes on Amazon for less than a hundred
dollars. The headlight bulbs were included..but not the parking and
Viair 450p fully automatic compressor
This is just a test of the Viair 450p fully automatic 12v air compressor.
This is great for 4x4 trail use, around town, etc... this is my video of
filling up a 20lb converted propane tank to air tank.
Ebay Air Compressor 12v
A quick look at a 150L 12V Portable Heavy Duty Air Compressor.
Here it is, pumping up my spare 4x4 tyre (different size wheels on the
These are sold under various brand names and even ( I believe) sold at
super cheap auto. I could be wrong here but they look identical. See for
yourself and YOU be the judge.
VIAIR Jeep JK 2007-2011 2on2 Bolt-On Platform Installation
VIAIR's 2on2 Bolt-On Platform is the newest solution to air management for
Jeep JK owners. Using either two 400C (High Speed) or 380C (High Pressure)
compressors at its core- and mounted on a 2.0 gallon 5-port air tank, these
vehicle-specific units provide more than enough CFM to accomplish virtually
any pneumatic task. The 2on2s all come complete with an easy-to-install
wiring harness and manifold to make wiring and plumbing the system
straightforward. Vehicle-specific bolt-on platforms for 2007-2011 Jeep JKs
are equipped with a crossmember mounting bracket.
DC 12V POWER MOTOR FOR CAR JACK & WRENCH
Use this Electric Scissor Jack to take the work out of lifting your car.
Includes a wired remote control, a 10 foot cord with a 12 volt cigarette
lighter adaptor. Lifts your car from 4 1/8" to 14 1/8". 10 amp draw.
Includes handy storage case. AAC Inc.
Jeep JK Engine Bay Compressor Install Video
This is the simplest way to install a compressor in your JK. It uses a
compressor with an integrated switch, so the switch and hose connection are
located inside the JK Engine Compartment.
This video shows a typical 2007 - 2011 install. The 2012+ install is a bit
more involved, but still offers a simple OBA solution.
These kits are also available with in-cab switch and front bumper air
Viar 88P Tire Inflator Test Run - 30PSI to 60PSI
A random test run to check the compressor's capability. Inflating a tire
from 30PSI to 60PSI; which the VIAIR 88P manages in 1min11Secs. Coming from
a cheap plastic ebay compressor the Viair's performance is just awesome!
I cross checked the Viair's pressure gauge reading with a Moroso tire
pressure gauge and both readings were approximately the same with
PS: The tyre pressure was brought down to the manufacturer recommended
value after this video clip was taken. I do NOT recommend driving with