Part 12: 13B Rotary Engine Rebuild - My 76 Mazda RX-5 Cosmo Restoration
Just as I promised last episode, it is finally time to build the engine!
Part 12 of my RX-5 Cosmo restoration covers the entire process of building
the 6 port 13B Mazda rotary engine. While this engine is a hybrid of GSL-SE
RX-7 and Cosmo parts, the process is the same for any rotary from a 12A to
a 13B NA, 13B turbo, 13B-REW or any
other variant of the 13B. This video shows the whole process of the engine
build, starting from measuring the rotors and covering everything else
including clearancing the side seals, assembling the rotors, complete
assembly the short block, setting the eccentric shaft end play and
installing the front cover and everything underneath it. It's probably the
most complete engine build video outside of what you can buy from the
vendors, and as such, is an hour long. After this one, I'm going back to
videos under 20 minutes. But for now, grab a beverage of your choice, sit
back, and enjoy.
Mazda Rotary Dyno Massive 1664HP
This engine has massive HP, WOW Awsome also on braptv.com Mazda Rotary
Queen Street Racing 4rotor GT60 1664HP
4 Rotor Mazda RX-8 Time Attack Car Revving Engine At Seven Stock 2009
This is 5 glorious minutes of a naturally apserated (individual throttle
bodies) 4 Rotor RX-8 time attack car revving its god like engine for a
massive crowd at the 2009 Seven Stock event in Irvine California. Turn up
The Mazda Rotary Engine Part 1
Educational film by Toyo Kogyo about the Mazda Rotary Engine. Shows how the
Rotary engine works with comparisons to the Piston Engine. Also shows the
Mazda RX500 test vehicle on a banked circuit and the Mazda Cosmo Sport (or
110S). Originates from the late 60's.
Twin Turbo Lamborghini Gallardo Superleggera Dyno - 1042RWHP
Facebook: http://on.fb.me/RHPage Twitter: http://bit.ly/RHTweets (MORE...)
PHOTOS OF THIS CAR: http://razzi.me/albums/141-sprite-s-twin-turbo-lamborghini-gallardo-superleggera
A twin turbo Lamborghini Gallardo
Superleggera on Dyno
at Heffner Performance. TT SL. This is not an Underground Racing car.
Temperature = 105*
Humidity = 20%
10000 rpm RX8
COBB TUNED RX8 GOING TO 10000 RPM SEVRAL TIMES.THAT EXTRA RPM GIVE YOU THE
BENEFIT OF BEING IN HIGHER RPM'S AMONG GEAR CHANGES THEREFORE INCREASING
THE CARS OVERALL PERFORMANCE.
**ALL STUPID,HATING,IGNORANT AND FOOLISH COMMENTS WILL BE DELETED AND THE
USERS POSTING THEM,BLOCKED.SO PLEASE DONT BOTHER.IF YOU HAVE SOMETHING TO
SAY ABOUT THE VIDEO IN AN APPROPRIATE MANNER,GO AHEAD.IF NOT JUST DONT **
MR PSI 1731HP Dyno run at VIC Supercruz
Check out our website http://www.hpheaven.com.au
Lyle Lemon's MR PSI personal best with 1731.7HP Dyno run at VIC Supercruz.
To download this clip and many other awesome motorsport videos go to the
home of horsepower
Mazda RX8 с двигателем от Приоры + компрессор на 1.5 бар.
Другие видео канала TheWikiHow:
На Мазде RX8 после 42 тыщ пробега сдох
родной роторный двигатель и было решено
поставить 16в двигатель ваз и оснастить
его компрессором для того чтобы он так же
как и ротор смог выдать 240 л.с.
RX-8 vs. 500 HP BMW M5 at VIR. Mazda RX-8 wins.
Google+ SUCKS. I'm sorry but I can no longer see or respond to comments as
I have blocked Google+. I will not be forced into Google's FAILED and
flatulent social network.
All future videos will be posted on Vimeo.com instead.
Second session on Saturday, June 14, 2008. Finally let me pass after 1-3/4
laps. Both the BMW driver and I are advanced, high-performance driving
The RX-8 is completely stock except for a B&B muffler and Hawk HP Plus pads
on the front. It does not have traction control or stability control.
Tires are original stock street Potenzas. No doubt the M5 is stock too,
and this has more to do with weight than horsepower.
Camera is a Creative Labs Vado cheapcorder stuck to the windshield with a
suction cup cellphone holder. Video was recorded upside-down due to the
mount, and was transcoded to rotate it. Quality suffered.
Mazda Rx7 4-rotor race car. The making of a Defined Autoworks Beast. [Offical Video]
Never before seen footage showing the assembly/start-up of our custom
4-rotor. It is the first 4-rotor since the 787b to use triple spark plugs
per rotor. It is also the first since the 787 to feature telescoping intake
manifold. Custom made slide throttle body system. A world first however is
the use of a center main bearing and 4-piece eccentric shaft. Quick specs-
9.7:1 rotors, lightened and race clearanced. Race main bearings, and race
rotor bearings, ceramic NRS 2mm apex seals. Custom stationary gears, Full
custom Peripheral Port in each rotor housing (defined auto), Aluminum side
housings for reduced weight. Needle roller bearing in the center housing.
4- Piece eccentric shaft 0:47
Dynamic engine balancing 1:23
Variable length intake 2:20
Engine assembly 2:32
Rotor rotation 3:49
Slide throttle 4:00
4-rotor startup and idle 4:30
All footage and editing was done by Defined Autoworks. Music by Ivan
Contact us at 614-592-7991 we build any type of rotary powerplant to the
See the build thread here-