Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

514 mercury capri VS 408 ford mustang

sabotage vs 408stang (hugo vs rodrigo)


 


More Videos...


408 Mustang Road Test (5-105 mph) No Traction!
First time testing the Mustang with the new 408 engine. Wasn't fully prepared for the signifigant loss of traction even with the drag radials. Took to the track later that week and ran the following... 60' - 1.604 1/8 - 6.970 MPH - 99.61 1/4 - 10.942 MPH - 122.22 This was using only the footbrake. With the trans brake and some better traction it should dip in the mid 10's. Put &fmt=18 at the end of the URL to see it in High Def.





408 Windsor Engine Dyno - 571 bhp
http://www.trickandmanswetoracing.com.au





408 Mustang Fox Stroker Coupe Wide Open Tuning Run #2
Another tuning run in the 408 Stroker Fox Coupe. I obviously ran out of fuel in 3rd gear as it nosed over hard and the A/F went super lean. Don't know if I was too low on gas, or if there a fuel pressure issue. Never had this problem before.





Mustang 351w-393 with 150 shot playing around
Hey guys, just a old video of my Mustang. Has since been tuned better, and had alot of suspension work done (this is on stock stuff). No Nitrous is used during these pulls, just sprayed for the look. Thanks for watching... (ignore my buddies weird noises :D )





Doorslammer Street Car 67' Fairlane - 2013 Thunder In The Valley, Port Alberni, BC.
Licensed street driven 67' Fairlane qualifies as a doorslammer, SWEET!!!





obnoxious motorsports turbo 331
workin out the bugs





1100 HP Big Block Ford 605 CID Race Engine Dyno Test
http://precisionraceengines.com/ Engine Dyno test on BBF 605 Stroker Race Engine. Race engines are avaliable for purchase by visiting our web site. Perfect for drag race, mud bog race,truck pulling, or any motorsports.





X-pipe vs H-pipe
Magnaflow "highflow" catted X-pipe, vs 23 year old stock mid pipe (bbk shorty headers, and MAC flowpath catback)





BIG BLOCK CHEVY ON ALCOHOL STUCK AT SHORTY'S MUD PIT
New mud pit we was trying out in san augustine tx. Big block chevy on tractor tires getting stuck alot in some sandy mud





Dyno-testing our 1,000+ HP 427ci Small Block Ford supercharged with a Paxton Novi 2500
We team up with Dart Machinery and Vortech Superchargers to bring you the second segment of our blow-through carbureted 351 Windsor-based 427ci small block Ford. We've finished the engine build, and now it's time to put our 427 Small Block Ford on the Dyno. The project's name is Bitting the Bullet, and it's a '65 Mustang that's being built for the 9-second zone with this Dart engine, a Paxton Novi 2500, and a Snow Water/meth system. How much did it make on the Dyno? You'll need to see for yourself. Visit Part 1 to See the Full Build: http://www.youtube.com/watch?v=L-bhGbXKSRU - SUBSCRIBE to the POWERTV YOUTUBE Channel -- http://www.youtube.com/subscription_center?add_user=powertv ***** Visit Power Automedia's Online Magazines! Power Automedia is the #1 Automotive Performance Digital Publisher! Ford & Mustang - http://www.stangtv.com LSX GM - http://www.lsxtv.com Hot Rods & Muscle Cars - http://www.streetlegaltv.com Drag Racing - http://www.dragzine.com Street Rods! - http://www.rodauthority.com Chevy Muscle Cars - http://www.chevyhardcore.com Engine Performance - http://www.enginelabs.com Corvette - http://www.corvetteonline.com Dirt Track - http://www.onedirt.com





Camaro ls3 vs Mustang 408
A race between 1992 Ford Mustang Lx with 408c.i. engine and 2001 UltraZ chevy Camaro with 416c.i. engine, all motor race ( No spray, No forced induction ). camera #2 is capturing the 300 meter pass. sorry for make the video too long with the photos, but many guys was asking for more photos for rides. Watch in HD ( 720p ). Enjoy :)





Ford Windsor CNC Alloy Cylinder Head Comparison Part 1
Extreme Magazine and Street Fords Magazine answer the question of value for money when it comes to out-of-the-box alloy cylinder heads versus CNC ported heads of the same original casting.





1991 MUSTANG PRO-STREET
1991 Mustang PRO-STREET





1979 ford f150 408 stroker





408w Mustang In Car Pulls And Street Burnouts 408
Just some in car footage and fooling around with the 408. 3rd Gear burnouts are always a good time! Here is a link to the build thread: http://www.svtperformance.com/forums/pics-videos-buffet-149/628182-my-408-9 3-coupe-build-pics-info.html





Which car is faster? Which Car is Faster?




Similar 1/4 mile timeslips to browse:

1969 Ford Mustang : 6.860 @ 204.000
Bill Sexton, Engine: 712ci Pontiac built by Sonny Leonard,


1969 Ford Mustang : 7.170 @ 177.000
CARL EPPLE, Engine: 572CI SVO 460, Tires: 33X10.5W MICKY THOMP


1969 Ford Mustang Mach 1: 7.670 @ 178.210
Phil Manquen - Walt Drakeford, Engine: 602 CI, Tires: 10.5


1987 Ford Mustang Turbo: 7.816 @ 180.800
Brad, Engine: 347CI, Turbos: Precision 98.5mm Tires: 28 x 10.5 MTs


1989 Ford Mustang lx: 7.850 @ 174.000
jorge fretts, Engine: 598, Tires: 33x10.5w


1995 Ford Mustang Cobra: 7.889 @ 197.360
Jim Mills, Engine: 427 Windsor, Turbos: Twin GT47-88 Tires: M/T 325/50/15 Radials


2007 Ford Mustang Super GT500 Twin Turbo: 7.890 @ 175.220
EV, Engine: Built 5.4L Aluminum Engine, Turbos: Twin 67mm Precision Turbos


1967 Ford Capri sedan: 7.980 @ 172.200
mick mahoney, Engine: 588 big block, Tires: m/t slicks


1989 Ford Mustang LX Hatchback 10.5 tire: 8.000 @ 170.000
Marshall Hancock, Engine: 572 ci, Supercharger: n/a Turbos: n/a Tires: M/T


1986 Ford Mustang THE STAMPEEDE BANDIT: 8.013 @ 170.033
Larry Gotreaux, Engine: BBF-ELIMINATOR-460-605ci, by Tims Engines, Denham Springs,, Supercharger: N/A Turbos: N/A Tires: 27x15 GY & 33.5x17x15W-GY-D1


1969 Ford Capri Windsor Nitrous: 8.250 @ 168.600
david murphy, Engine: windsor,


1993 Ford Mustang LX: 8.390 @ 167.870
Lee Howie, Engine: Bennett, Turbos: 1 Precision PT90 Tires: DOT


1987 Ford Mustang coupe: 8.400 @ 162.370
Todd, Engine: 385ci,


1989 Ford Mustang coupe: 8.420 @ 167.000
Ryan Ellington, Engine: sbc 434, Tires: mt 275/60/15 drag radial


1991 Ford Mustang GT: 8.520 @ 172.700
PRO LARRY, Engine: 351W, Supercharger: NA Turbos: NA Tires: NA


1990 Ford Mustang GT: 8.527 @ 172.300
PRO LARRY AND BRANDON G.T, Engine: 351W, Tires: 10.5 SLICK'S


1993 Ford Mustang Cobra 363 Nitrous: 8.541 @ 152.870
CJ Williams, Engine: 363,


1971 Ford Capri GT1600: 8.574 @ 157.850
Elvio Gonzalez, Engine: LS2 364ci, Supercharger: N/A Turbos: Single 74mm Tires: DS2, M/T 275 drag radial


2006 Ford Mustang GT: 8.579 @ 158.780
Paul Fercho, Engine: 572 CID big block ford, Supercharger: none Turbos: none Tires: M/T 29.5X10.5WX15 Slicks


1985 Ford Mustang lx: 8.600 @ 159.000
mike pritchard, Engine: 537ci, Tires: 30x13.50 et streets


 


©2015 DragTimes - Disclaimer - Contact Us