When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $64.95
This auction is for a 8 inch Ford carrier that has been cleaned and has a new lite weight mini-spool installed. This carrier can be installed in your Ford 8 inch third member without affecting the pinion depth, just set the backlash to the original setting and you are good to go. Using the mini-spool set up in your third member effectively locks the rear axles together so that both wheels pull posi-track all the time. There are no case breaks or carrier series numbers so any ratio of Ford 8 inch gears will work on this carrier. The mini-spool equipped carrier is commonly used in many racing applications such as IMCA Modifieds, Street Stock, Mini-Stock, Bomber class, Enduro Racing and also Demolition Derby cars that are equipped with a 8 inch Ford rear end. These will not work in 9 inch rear ends and are available in 28 spline only since Ford never made 8 inch rear ends with 31 spline axles. I have several of these available in case you need more than one unit. The carrier comes with the factory cross pin, the factory 2.89 O.D. bearing/race set and the Mini-Spool installed and ready to assemble in your third member. The bearings and races are inspected to make sure they are not excessively worn and should give good service. If you would like to have new bearings installed add $25 to the winning bid. If you would like to have a Chrome Moly cross pin installed add $15 to the winning bid. Mini-Spool differentials are not recommended for everyday street use or use with drag racing slicks. If you have a question e-mail me before you bid. Buyer will pay shipping from zip code 47660. Sorry no personal or business checks accepted. Full payment is expected within5 days of auction close. Please check my other auctions for more gears and parts. Thanks for looking. Good Luck Bidding!!!