When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $71.49
- 2 Pcs Wheel Bearing and Hub Assembly
- Location: Left+Right+Front
- Material: Bearing Steel
- ABS Sensor Included:No
- Wheel Stud Quantity: 5
- Flange Diameter:138.99 MM
- Wheel Stud Size:M12 x 1.5
- Fits Dodge Stealth 1991-1996 AWD
- Fits Mitsubishi Lancer 2003-2006 AWD
- Fits Mitsubishi 3000Gt 1991-1999 AWD
What's in the box?
- 2 Pcs Wheel Bearing and Hub Assembly
Specifications:
- Location: Left+Right+Front
- Material: Bearing Steel
- ABS Sensor Included:No
- Wheel Stud Quantity: 5
- Flange Diameter:138.99 MM
- Wheel Stud Size:M12 x 1.5
Compatible Vehicles:
- Fits Dodge Stealth 1991-1996 AWD
- Fits Mitsubishi Lancer 2003-2006 AWD
- Fits Mitsubishi 3000Gt 1991-1999 AWD
The wheel hub bearing needs to be replaced in the following situations（notes）
- A humming, rumbling or growling noise that increases with acceleration or as the vehicle turns
- Vibration, felt in the steering wheel, which changes with vehicle speed or as the vehicle turns
- Looseness or excessive play* in the steering wheel (especially while driving over rough road surfaces)
- A loud, constant grinding noise when driving the vehicle (heard in the most severe cases of a wheel bearing failure)
- Puling to one side when braking
- Roughness or vibration when rotating the wheel with the vehicle off the ground
- Excessive brake pedal “play” (can also indicate excessively loose wheel bearings)
- ABS light illumination or system issues (may be related to failure of the ABS sensor in the hub assembly or the internal sensor in the wheel bearing)
Purpose and Commitment :
- We insist on innovation and development.
- Our everlasting purpose is high quality , Integrity-based and Full service.
Removing and Installing a Hub Unit Bearing:
A.Hub Unit Bearing Removal
1.Raise vehicle and remove lug nuts and wheel.
2.Remove the brake caliper and rotor. Support the brake caliper with an “S” hook or a piece of wire.
3.Remove the axle nut, using an axle nut socket. Follow the manufacturer’s instructions for nut replacement.
4.Before removing hub unit, make a note of the proper orientation and positioning of the sensor wire and bearing. Disconnect the ABS sensor wire from its mating connector point and positioning clips.
5.Remove the steering knuckle attachment bolts. You may need a puller to remove the hub assembly. Do not damage the knuckle or axle shaft.
6.Clean and inspect the steering knuckle. Remove any debris, nicks or burrs using a fine file, wire brush, emery cloth or honing stone.
B.Hub Unit Bearing Installation
1.Insert the new hub assembly into the steering knuckle. Check the positioning of the splines on the axle shaft while inserting the hub assembly. Never force the hub assembly on the shaft or strike with a hammer.
2.Torque the knuckle-bearing mounting bolts to the vehicle manufacturer’s specification using a torque wrench. Do not use an impact wrench.
3.Connect the new ABS sensor that comes already attached to the new bearing to its mating connection point and clips in the wheel well and frame area.
4.Install the axle nut. Tighten the nut to the vehicle manufacturer’s torque specification using a torque wrench. Do not use an impact wrench.
5.Replace the brake rotor and brake caliper. All components should be cleaned from debris and burrs.
6.Replace the wheel and torque the lug nuts. Follow the vehicle manufacturer’s recommendations regarding torque specification and re-torque requirements.
Warningfailure to observe the following warnings could create a risk of death or serious injury!!!
Item SpecificsPlacement on Vehicle LeftWarranty 1 YearManufacturer Part Number SUA802830carsInterchange Part Number 513133MB633276, MB914617, MR223962Brand SUA4carsSurface Finish Polished, Rust ProtectedOther Part Number 80283010001
Payment 1.We only accept PayPal.2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)Shipping 1. Orders processed within 24 hours of payment verification.2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.3. The images shown are not the actual item and are for your reference only.4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!Returns 1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!2. All returned items must be in the original packaging and you must vide us with the shipping tracking number, specific reason for the return, and item custom lable.3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.4. Return shipping is to be paid by the Buyer.Custome Services Q: How do I pay for my purchase?A: MY store accepts PayPal.Q: When will the item be shipped out?A: This item will be shipped with 2 business day once payment completed.Q: Where is my tracking number?A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.Q: How do I return an item?A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item.Feedback 1. We will leave a feedback once we get your payment.2. If you are dissatisfied for any reason, please do contact us a feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave a feedback to all our customers.3. If you are satisfied with the product you received, wish you can leave us a feedback. DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US New Front Complete Wheel Hub and Bearing Assembly For Saturn Pontiac w/ ABS
What's in the box?
- 2 Pcs Wheel Bearing and Hub Assembly
Specifications:
- Location: Left+Right+Front
- Material: Bearing Steel
- ABS Sensor Included:No
- Wheel Stud Quantity: 5
- Flange Diameter:138.99 MM
- Wheel Stud Size:M12 x 1.5
Compatible Vehicles:
- Fits Dodge Stealth 1991-1996 AWD
- Fits Mitsubishi Lancer 2003-2006 AWD
- Fits Mitsubishi 3000Gt 1991-1999 AWD
The wheel hub bearing needs to be replaced in the following situations（notes）
- A humming, rumbling or growling noise that increases with acceleration or as the vehicle turns
- Vibration, felt in the steering wheel, which changes with vehicle speed or as the vehicle turns
- Looseness or excessive play* in the steering wheel (especially while driving over rough road surfaces)
- A loud, constant grinding noise when driving the vehicle (heard in the most severe cases of a wheel bearing failure)
- Puling to one side when braking
- Roughness or vibration when rotating the wheel with the vehicle off the ground
- Excessive brake pedal “play” (can also indicate excessively loose wheel bearings)
- ABS light illumination or system issues (may be related to failure of the ABS sensor in the hub assembly or the internal sensor in the wheel bearing)
Purpose and Commitment :
- We insist on innovation and development.
- Our everlasting purpose is high quality , Integrity-based and Full service.
Removing and Installing a Hub Unit Bearing:
A.Hub Unit Bearing Removal
1.Raise vehicle and remove lug nuts and wheel.
2.Remove the brake caliper and rotor. Support the brake caliper with an “S” hook or a piece of wire.
3.Remove the axle nut, using an axle nut socket. Follow the manufacturer’s instructions for nut replacement.
4.Before removing hub unit, make a note of the proper orientation and positioning of the sensor wire and bearing. Disconnect the ABS sensor wire from its mating connector point and positioning clips.
5.Remove the steering knuckle attachment bolts. You may need a puller to remove the hub assembly. Do not damage the knuckle or axle shaft.
6.Clean and inspect the steering knuckle. Remove any debris, nicks or burrs using a fine file, wire brush, emery cloth or honing stone.
B.Hub Unit Bearing Installation
1.Insert the new hub assembly into the steering knuckle. Check the positioning of the splines on the axle shaft while inserting the hub assembly. Never force the hub assembly on the shaft or strike with a hammer.
2.Torque the knuckle-bearing mounting bolts to the vehicle manufacturer’s specification using a torque wrench. Do not use an impact wrench.
3.Connect the new ABS sensor that comes already attached to the new bearing to its mating connection point and clips in the wheel well and frame area.
4.Install the axle nut. Tighten the nut to the vehicle manufacturer’s torque specification using a torque wrench. Do not use an impact wrench.
5.Replace the brake rotor and brake caliper. All components should be cleaned from debris and burrs.
6.Replace the wheel and torque the lug nuts. Follow the vehicle manufacturer’s recommendations regarding torque specification and re-torque requirements.
Warningfailure to observe the following warnings could create a risk of death or serious injury!!!
Item SpecificsPlacement on Vehicle :LeftWarranty :1 YearManufacturer Part Number :SUA802830carsInterchange Part Number :513133MB633276, MB914617, MR223962Brand :SUA4carsSurface Finish :Polished, Rust ProtectedOther Part Number :80283010001Payment 1.We only accept PayPal.2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) Shipping 1. Orders processed within 24 hours of payment verification.2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.3. The images shown are not the actual item and are for your reference only.4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction! Returns 1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!2. All returned items must be in the original packaging and you must vide us with the shipping tracking number, specific reason for the return, and item custom lable.3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.4. Return shipping is to be paid by the Buyer. Custome Services Q: How do I pay for my purchase?A: MY store accepts PayPal.Q: When will the item be shipped out?A: This item will be shipped with 2 business day once payment completed.Q: Where is my tracking number?A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.Q: How do I return an item?A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. Feedback 1. We will leave a feedback once we get your payment.2. If you are dissatisfied for any reason, please do contact us a feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave a feedback to all our customers.3. If you are satisfied with the product you received, wish you can leave us a feedback.
All rights reserved.