When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $10.59
PROFESSIONAL
LEATHER EXTRA STRONG GLUE AND FILLERREPAIR KIT
FORAUDIA4, A5, A6, A7, A8,TT, R8, RSCARSINTERIORS AND SEATS
For fixing rips, tears, cuts, cracks, burns, holes and other damages in leather.
DESCRIPTION:
The leather glue and filler repair kit provides you with all the necessary products required to quickly and easily make professional repairs to any damaged leather item, regardless of your level of experience or technical abilities. Repair cuts, holes, tears, rips and all other surface damage yourself, at a fraction of the cost of purchasing a new item or calling out a professional.
Suitable for all types of leather.
Use it to repair car interiors and seats, motorcycle leathers,
shoes, boots, handbags, belts, jackets, sofasand much more.
Please note that this kit contains the products needed to repair the damage and not colour it.
BENEFITS:
Flexible bond
Durable
Long lasting repair
Natural feel finish
Easy to use
Cost effective
CONTENTS:
Leather glue – 15ml
Leather Heavy Filler Compound (WHITE) - 15ml
Application brush
Fabric sub patch – 10 x 10cm
Wooden spatula
Manual
DIRECTIONS:
Prepare the area to be treated by scraping off any burned edges and cutting off any rough / frayed particles.
Ensure that the leather is completely clean and dry before applying the leather glue.
Install a sub-patch if necessary. To do that, cut the patch to about 1cm all round larger than the crack or hole.
Use your fingers to carefully spread the hole open.
Push the sub-patch into the hole and use the spatula to position and flatten it.
Using the application brush apply glue between leather and sub patch as well as on the edges of the crack or hole.
Draw the two sides together.
Press firmly to adhere the sub-patch to the glue. Do not allow the patch to move or slip; hold it steadfast to the leather until it dries.
Any excess glue can be wiped away with your fingers or cloth whilst it is still wet.
WHEN SUB PATCH IS NOT NECESSARY (SMALL CUTS)
Open the cut out by squeezing either side of it with your fingers.
Dip the application brush into the leather glue so there is a small amount of glue on the end.
Dab the cut with the brush length ways to apply the glue.
Release your grip and push either side of leather back together again.
Gently press the cut down.
Leave it for 12-24 hours
Next step:
Apply a medium coat of repair compound.
Use a hairdryer to speed up drying time.
Will cure at low, medium or high heat.
Gently sanding can be done immediately after curing.
For graining, apply a thin layer.
Heat and press in grain.
STORAGE INSTRUCTIONS:
Store in a dry, cool and airy place.
Keep from freezing and extreme heat.
Keep locked up and away from the reach of children.