When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $350.00
this is ugly but effective plenum rotated upper for a 2.3 turbo ford
its a one stop shop compact manifold that works on an xr4ti clears the hood and the alternator mount.
this took hours to butcher polish and weld and it still looks like ok at the top and ugly at the base.
it has oversize throttle body and all sensors fuel rail (xr4 style )injectors, knock and air temp everything.that would be on it on the car
it has a sn95 throttle body on it with adaptor harness to fit eec4 system on xr4ti and thunderbird and svo
it increases plenum volume with the large diameter and allows more high rpm intake tuning
it however is a hack job on the upper to lower transition its a gutted upper slapped to the plenum and the air turning divider plate
there is ugly welding bad polishing and some epoxy on the ugly welding . it looks horrible and actually preforms well.
this lower is knife edges nicely and done well the really ugly part is the base of the plenum where it bolts to the lower.
manifold is from a turbo 2.3 ford and has knock sensor port in it as well as intake air temp port
46lb per hr injectors and adjustable fuel pressure regulator home built as well and ugly as well.
I also have 46lb pr hr injectors and 35 lb per hr injectors for this motor
and many many other engine and performance parts for this motor.