When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $89.99
1981-1988 Cutlass Supreme Chrome Bumper Trim
Description
1981-88 Oldsmobile Cutlass Supreme/Salon/442 Chrome Bumper Trim Replacement. Closest you will come to OEM. This will include 6 pre-cut pieces, 2 for the front and 4 for the back. There is other molding out there, however they are not all the same. The dimensions and materials used are not the same. Most universal moldings, especially the Chinese versions will crack from the bends in the bumper as well as fade over time. Also if the width is too narrow the molding will have curves like a snake when it goes in with the unsteady hand. This molding will have the precise width so that the molding goes in straight. Also GM used a very shallow half round pitch in it's design this molding will memic that a closely as possible. This is a High Quality Molding that will last many years with 3M Backing. All molding are not the same.
Here is a photo of my own vehicle with the trim.Instructions:
For best results it is recommended to clean the surface prior to installing. You could do it without cleaning and it may or may not last depending on how dirty the surface is. 3M makes excellent adhesive material but the adhesive is only as strong as what it bonds to, and if that happens to be dirt and oil then you will be relying on dirt and oil to stick to the paint.for bests results temp of car should be at least 70 degrees f.
Preferably when humidity is at it's lowest.
Clean surface with a non oily general purpose wax and grease removal-such as 3m general Purpose #08984 followed by Isopropyl alcohol. If you do not have the wax and grease remover, make sure the car is clean and use Isopropyl Alcohol alone. Apply pressure on the molding as you go to make sure the seal is tight.The finest automotive quality materials. Installation is quick and easy, without drilling, by using self-adhering 3M Tape.
For best results surface must be cleaned preferably with Isopropyl Alcohol. Ideally in a low humidity environment.
Feedback
Please Leave us Positive Feedback after you have received your item and we will do the same.Ofcourse you have the option to leave Negative Feedback as well but if for any reason you are not satisfied please contact us before leaving Negative Feedback.Understand Feedback should always be a reflection of the seller not the item.
When I've viewed Feedback on other Sellers, I've never understood why buyers left Negative because of a item defect or because an item wasn't what they thought it would be even though description was accurate. Please understand that items will sometimes have defects or just won't work for us, However Feedback isn't about the item but rather how the Seller handles the situation of the item. Please keep that in mind. Thank You for Viewing.
Check my other auctions for alternate moldings.
Shipping
Standard Shipping for Items under 13oz: USPS First Class Mail.
Standard Shipping for Items over 13oz USPS Priority Mail
Standard Shipping for Large Items is Fed Ex Ground or UPS.
Expedited Mail for Get it Fast is Fed Ex Express Standard Overnight.
Combined Shipping Available.
PaymentImmediate Payment Required for Buy It Now.
Please Pay Auction Payments in a timely Manner so we can deliver the items to you faster.