When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $687.02
- CARiD Accessories
- CARiD Wheels & Tires
- CARiD Auto Parts
- Semi Truck
- Motorcycle
- Powersports
- RV / Camper
- Boating
- Recreation
- Tools
- Interior
- Exterior
- Lighting
- Audio
- Wheels
- Tires
- Performance
- Repair
- Body
- Automotive
Tools
Dual Sport™ Stainless Steel Cat-Back Exhaust System with Dual Side Exit by Gibson®. Exhaust System Type: Cat-Back. Exhaust Tubing Material: Stainless Steel. Main Tubing Diameter: 2.5\". Exhaust System Sound: Aggressive / Loud. Get increased horsepower and torque in the rpm range where you need it most, along with dual exhaust tip style, with the Dual Sport Cat-Back Exhaust System. This Gibson exhaust system makes maximum low end power, which is best for towing, general performance and increased fuel economy, with a deep, commanding exhaust tone. It\'s made of stainless steel and comes with dual exhaust pipes and dual polished stainless steel exhaust tips that exit behind the rear tire.
Notes: Remember to check your local and state laws regarding vehicle noise restrictions.
Specifications:
- Exhaust System Type: Cat-Back
- Exhaust Tubing Material: Stainless Steel
- Exit Location: Behind Rear Tire
- Exit Configuration: Dual
- Main Tubing Diameter: 2.5\"
- Exhaust System Sound: Aggressive / Loud
- Muffler Inlet Diameter: 3\"
- Muffler Outlet Diameter: 2.5\"
- Muffler Quantity: 1
- Muffler Body Length: 19\"
- Muffler Body Diameter: 7\"
- Muffler Body Shape: Round
- Muffler Configuration: Center - Dual
- Tip Quantity: 2
- Tip Finish: Polished
- Tip Material: 304 SS
- Tip Inlet Diameter: 2.5\"
- Tip Outlet Diameter: 3.5\"
- Tip Length: 12\"
- Tip Shape: Round
- Tip Cut Type: Slash-Cut
- Tip Attachment Style: Clamp-On
Features:
- Average horsepower gains are 10-15 and 15-20lb-ft of increase torque
- Deep, Commanding Exhaust Tone
- Makes maximum horsepower and torque at low rpm
- Increased fuel economy
- Dyno tuned for each application
- Less restriction for increased exhaust flow
- Ideal for towing and general performance
- CNC mandrel bent exhaust tubing
- Dual polished T304 stainless steel clampless exhaust tips that exit behind the rear tire
- Steel warranted against defects in materials and workmanship
- Limited lifetime warranty on rust through on stainless steel
- Comes with everything required for an easy bolt-on installation
- Street legal in all states
- Proudly made in the USA
Includes:
- (1) 2.50\" Clamp (Part Number 5757)
- (1) 2.50\" Stainless Driver Side Over-Axle Tailpipe (Part Number 981-700761S)
- (1) 2.50\" Stainless Passenger Side Over-Axle Tailpipe, with Hanger (Part Number 982-700762S)
- (1) 3.00\" Clamp (Part Number OHD300)
- (1) 3.00\" Stainless Headpipe with Gp-101, with Welded Hanger (Part Number 948-700724S)
- (1) Bolt Kit For Flange (Part Number BO-1048)
- (1) Bolt Kit For Tailpipes (Part Number BO-906)
- (1) Flange Gasket (Part Number 9684)
- (1) Rear Muffler Hanger (Part Number 4253)
- (1) Stainless Superflow Muffler (Part Number 758219S)
- (2) 3.50\" Stainless Tip (Part Number 500374)
There are many performance exhaust system manufacturers that make extravagant power claims, with a lot of talk about increased flow with huge exhaust tubing. But their systems usually make the most power at 5000-6000 rpm, an rpm range seldom used on the street, even by performance vehicles. And those sewer pipe sized tubes actually reduce torque at lower rpm, where you need it the most.
The Gibson Dual Sport Cat-Back Exhaust System is designed and built to make horsepower and torque for real world driving conditions. Dyno results show that this system makes maximum horsepower and torque at 1800-3000 rpm, where you can feel it during every day driving and where you need it when doing things like towing a trailer. And along with that increased power and improved performance you get better fuel economy, a nice deep, commanding exhaust tone, and a lot of style from 2 separate exhaust pipes and 2 polished exhaust tips that exit behind the rear tire.
Gibson designed this exhaust system at their fully equipped research and development center, using engine and chassis dynos, flow benches and audio testing equipment. To make useable real world power, Gibson equips this system with the Superflow muffler and mandrel bent tubing. The all-welded construction Superflow muffler is baffled and chambered for better volume efficiency with unrestricted flow. It\'s so efficient it has only 5% exhaust flow restriction, as opposed to the 34% or more restriction in a typical stock muffler, and the 10-20% restriction that exists with some aftermarket mufflers. And the increased flow and great sound is achieved without using any muffler packing, so there\'s no packing to blow out. Your exhaust flow and sound will remain consistent throughout the life of the muffler.
The other key to less restriction and improved flow is mandrel bent tubing. First Gibson selects the optimal tubing diameter for the best engine efficiency, not the most exhaust flow, then they use CNC mandrel tube benders to make every tubing bend. Mandrel bending ensures smooth bends and makes sure the pipe maintains its size and shape throughout the entire length. Tubes that aren\'t mandrel bent can lose a percentage of their diameter in sharp bends, creating restriction. CNC mandrel bending provides consistent bending so every system flows as designed.
Finally, all Gibson exhaust system components are joined with a “slip fit”, where an exhaust system component fits into the larger opening of the next downstream component. This method reduces the turbulence that is common with ‘ball-and-socket” or “flange-and-gasket” joints, which can cause power-robbing backpressure.
The Gibson Dual Sport Cat-Back Exhaust System is available in your choice of stainless steel or aluminized steel. Each comes with highly polished dual T304 stainless steel clampless exhaust tips. The system comes with everything required for installation, including zinc plated factory style hangers and clamps, and detailed instructions. Aluminized systems are warranted against defects in materials and workmanship, but not rust through, for as long as the original purchaser owns the vehicle on which the system is installed. Stainless steel systems are warranted against defects in materials and workmanship, including rust through, for as long as the original purchaser owns the vehicle on which the system is installed.
Gibson exhaust systems are manufactured in the USA.
Product Video About Us About UsNo matter whether you\'re doing basic repairs and maintenance, modifying your car\'s street appeal and performance, or adding high-tech lighting and electronics, our great selection of brand name products and knowledgeable associates will ensure success with all your automotive projects.
Our MissionWe offer the finest and widest variety of automotive parts and accessories using state-of-the-art technologies, and employ the most dedicated and creative team members.
These individuals focus on exceeding expectations of customers who want the exact component at the best price in the quickest time. Our goal is to provide a WOW experience during every customer interaction.
Whatever you need, whether it\'s a replacement part to fix a broken down vehicle, a crash part to repair a vehicle from an accident, perhaps a new set of custom wheels and tires, or something to make it flashy or faster, lifted or lowered, we will be your one-stop shop.
We fulfill our mission daily with enthusiasm and optimism, learning from our ongoing opportunities and successes. We enjoy a modern yet tricked out work atmosphere while ensuring a true learning environment to develop our people.
All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only. It is neither inferred nor implied that any item sold by CARiD is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.
Copyright © 2003-2024 CARiD. All rights reserved.