When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $52.99
Thickness: 0.78 inch / 20mm
Vehicle bolt pattern: 5x4.5\" / 5x114.3mm
Wheel bolt pattern: 5x4.5\" / 5x114.3mm
Thread size: M12x1.5
Center bore: 2.37 inch / 60.1mm
LEXUS
1992-2023 ES(ES300/ES330/ES350/ES300h)
1993-2020 GS(GS200t/GS300/GS350/GS400/GS430/GS450h/GS460/GS Turbo)
2015-2020 GS F
1990-2005 LS(LS400/LS430/LS460)
1997-2021 RX(RX300/RX330/RX350/RX350L/RX400h /RX450h/RX450hL)
2014-2023 RC(RC350/RC200t/RC300/RC Turbo/RC300 AWD )
2014-2023 RC F
1991-2010 SC(SC300/SC400/SC430)
1999-2019 IS(IS200/IS300/IS300 AWD/IS250/IS350/IS200t)
2009-2015 IS C
2007-2014 IS F
2009-2018 HS(HS250h)
2014-2021 NX (NX200/NX200t/NX300/NX300h/NX Turbo)
2018-2023 UX
2019-2023 LM
2010-2012 LFA
SCION
2011-2016 tC
2008-2016 xB
2015-2016 IM
TOYOTA
1995-2023 Avalon
2009-2013 Corolla Altis
1996-2023 Camry
2016-2023 C-HR
2001-2023 Highlander
1991-2000 MR2
- Following your vehicle owner\'s manual, proper raise the vehicle and support it using adequately load-rated jackstands.
- Remove wheels and inspect rotors for any damage or cracks. If any damage is identified, don\'t continue with this installation.
- Remove any wheel visible rust from the mating flange on the vehicle\'s rotor. Check both the rotor and wheel mounting flanges for burns, rivet heads, or other obstruction which could prevent proper seating of the spacer/adapter.
- If proper seating can be achieved, apply provided thread locker to vehicle\'s studs and mount the wheel spacers on to rotor by torquing provided wheel spacers/adapter lug nuts. Tighten all lug nuts to the appropriate torque specification using a torque wrench.
- Install wheel on to wheel spacer using existing lug nuts. Tighten all lug nuts to the appropriate torque specification using a torque wrench.
- DO NOT USE AN IMPACT WRENCH.
- Check that wheel and tire clearance allow for full steering(lock-to-lock).
- If there is no interference, vehicle may be lowered.
- Re-check torque after traveling the first 50-100 miles, then again every 2000-3000 miles.