When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $499.99
You are bidding on a Brand New Pair of Southwest Speed Painted Flat Black Lake Style Headers with 3-1/2" Diameter Mega-Phone Collectors and 3 1/2" Black Turnouts that fits Small Block Chevy 265-400ci Engines (SWS Part #440-2312, 440-2980).
This Pair of Southwest Speed Lake Style Headers with 3 1/2" Turnouts is great for Hot Rods, Street Rods, Rat Rods & Nostalgia Rods, and are hotter than ever.nothing gives your vintage rod that authentic dry lakes competition look like a set of lake style headers. Originally designed to blow across the salt flats of Bonneville, these exposed Small Block Chevy headers work great on rods without hoods, but are often used with side skirts trimmed up to fit around the headers. Running the turnouts delivers the true horsepower of the Small Block Chevy but each lake style header has a bottom exit flange so you can connect it to a muffled under-car exhaust. This will require unbolting the turnouts, & installing the endcaps. The Headers feature 1-5/8" primary tubes merging to the 3-1/2" collectors, & comes complete with header bolts and gaskets, reducer bolts and gaskets, and end cap bolts and gaskets. These headers are Ground parallel with .350" flanges on the cylinder head surface, & includes a pair of 2-1/2" reducers to complete the installation. The 3 1/2" Diameter Turnouts are supplied with precision cut 1/4" thick x 5 1/2" Diameter Flanges, complete with bolts and gaskets. Fits angle or straight plug heads, no spark plug or spark plug wire restrictions.
Note: We strongly suggest you refer to measurement chart below to insure headers will fit your vehicle and application, before ordering.
Kit Includes:
- New Southwest Speed Small Block Chevy Lake Style Black Headers (#440-2312)
- 1-5/8" primaries to the 3-1/2" mega-phone collector
- Includes 2-1/2" reducers to connect exhaust under the vehicle
- Removable end plates allow you to run open headers with ease
- Great for Hot Rods, Street Rods, Rat Rods, & any Nostalgia Rod
- More Performance
- Better Mileage
- Nice Choice to replace cast iron exhaust manifolds
- Enhances the looks of any rod
- Painted Flat Black to resist early corrosion
- New Southwest Speed 3 1/2" Black Turnouts for Lake Style Headers (#440-2980)
- Designed specifically for Southwest Speed Lake Style Headers
- 3 1/2" Diameter Turnout
- 1/4" Thick X 5" O.D. Flange
- 4 X 4 1/4" Bolt Circle with 5/16" Bolt Holes
- Includes gaskets and mounting hardware
- Painted Flat Black to resist early corrosion
Applications:
- Fits all small block Chevrolet V-8 engines with standard exhaust pattern
- Fits 265-400 Cu. In. Standard, Vortec, and D-port ZZ-4 heads (not LT-1)
Paint Warning:
These Headers & Turnouts are painted with a high heat dull black paint. It will generally dull even more when the engine is started. The header paint will smoke and let off an odor the first few times the engine is up to temperature and the black finish will become duller turning closer to gray in color. If exhaust temperatures are extreme at start the paint will blister and peel. There is no warranty on header turnout paint.
Header Return Policy:
Please refer to the header measurement chart below to make sure the header will fit your vehicle and application before ordering. In the event you order a header that will not fit your vehicle and application, you may return them for a refund, providing you don't damage the header. When you receive the header the finish will be protected and must remain unscratched for a refund. If you bend or dimple any of the tubes or scratch the finish, we will not be able to sell the header and will not be able to process a refund. Use care when trial fitting headers. Repack them well to prevent damage returning them to us. We won't process refunds for scratched, dimpled, dented, or bent headers.
We also have these same headers available in:
- Chrome-Plated Headers with 3 1/2" Ceramic Coated Turnouts
- Polished Stainless Steel Headers wtih 3 1/2" Ceramic Coated Turnouts
- Ceramic Hot Coated Headers with 3 1/2" Ceramic Coated Turnouts
DRIVERS SIDE HEADER MEASUREMENT CHART
PASSENGER SIDE HEADER MEASUREMENT CHART
We also have thousands of other High Performance Parts in our store.
Shipping:
There is no faster shipping on Ebay. If you pay for the item by 5:00 Eastern, Monday-Friday, we will ship it the same day. If it's after 5:00 EST, we will ship it the next business day. If you pay for the item on the weekend, we will ship it out Monday.
Ebay now requires that sellers put a "handling time" on each item and "1 Business Day" is the shortest listed option. WE DON'T HAVE A HANDLING TIME. We ship same day in accordance with the paragraph above. No delays here. We want you to have the parts as bad as you do.
Shipping cost will be $29.99 within the continental United States. If you buy 2 or more of our auctions, shipping will certainly be combined to save you money. We will be glad to ship internationally. Just send me a message for an international shipping quote.
Accepted payment methods:
We accept Paypal. If buyer doesn’t have a Paypal account, he or she can pay with Visa, Mastercard, or Discover through seller’s merchant account.
After purchasing, pay instantly with your credit card through PayPal!