This item has been shown 0 times.
For offers: a Martin Turbo Systems turbo kit for small block V8 Chevys. All the parts shown in the picture are included:Upper and lower intake manifold. Comes complete with the vanes and pop-off protection valve.
Cold side connection pipes to/from the turbocharger
Brand new Rajay E10 turbocharger
Turbo exhaust pipe
1 turbo cast iron exhaust manifold
Another box of pipes to connect the (stock side) manifold to the bottom of this one
Used Rotomaster wastegate (clamps in place over the exhaust tube)
Oil drain kit (goes between the stock mechanical fuel pump and block)
2 packs of gasketsI don't have the oil supply pipe or carb, you will have to provide those to use this kit on your engine. Some welding will be required to fab the crossover exhaust pipe, and turbo downpipe. This would be a good kit for a truck, or a ride which needs a lot of torque at low RPM. It's not really for racing, but should provide a decent boost to the engine's performance. I strongly suggest that you also install a wideband oxygen sensor in the turbo downpipe, to monitor AFR and to assist in tuning. This will make sure you don't run lean and blow the engine. You will also need a means to retard ignition timing during boost, either by limiting the advance in the distributor or by installing an MSD 6BTM style box. I've also used Megajolt crank triggered ignitions, and they are very good.I'd prefer to sell this locally, if you want it shipped it will be very expensive due to the weight. That means if you're the winning buyer and want it shipped, you must contact me before payment with your address. Then I will get a shipping quote and let you know the cost. It we are in agreement, I will shoot the updated invoice to you for payment.I'm starting at $500, which I feel is a reasonable price for the parts.Good luck!