HONDA DOUBLE DIN Dash Install Kit for JAZZ Aftermarket Stereo/Radio 2007-2008 for Sale


When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Price: $56.00

HONDA DOUBLE DIN Dash Install Kit for JAZZ Aftermarket Stereo/Radio 2007-2008

Every Bid is an Instant Winner

HONDA DOUBLE DIN Dash Install Kit for JAZZ Aftermarket Stereo/Radio 2007-2008
Install Dash FaceplateKits/ Dash Kit for Stereo Installation
Auto makers factory radio is usually differentshaped & sized.

  • MountAftermarket Radios into the opening where theOEM radio was.
  • Install Dash Kits Convert size differences between : OEM stock radios & Aftermarket Replacement


Installation Kit Features:

WORKS WITH THESE MODELS BELOW ONLY:

2007 - 2008HondaJAZZ DBL Din Kit color match (LEFT HAND DRIVE)

Accommodates ISO Double DIN (LF) SIDE DRIVER

  • Factory contour match
  • Factory Color matched
  • High strength ABS plastic
  • Includesdial labels and dash retaining clips
COLOR :Machined TO MATCH ORIGINAL COLORCONDITION :BRAND NEW
RADIO INSTALL DASH KITRetains the Factory Climate Controls in the Original Locations.Retains the Factory Passenger Airbag Light in the Original Location.Removable Oversized Storage Pocket with Built-In Radio Supports.Includes Parts for Installation of a Double-DIN Radio or Single-DIN Radio with Pocket.Quick Release Snap-In ISO Mount System with Custom Trim Ring.Recessed DIN Opening.Painted to Match the Original Color and Texture.Contoured and Textured to Match the Factory Dash.Includes All the Necessary Hardware for a Complete Install.Step-By-Step Instructions.Double DIN Radio Provisions.Stacked ISO Mount Units Provisions.

HONDAJAZZ2007-08

FAQ (about Installation Parts)

Frequently Asked Questions
If my Vehicle is Listed; do I really need this? YES (its a good idea)
Do I need Any other Additional Parts?
Most likely a wire harness and antenna adapter will be also needed.
HOW DO I FIND OUT?

Easy to find by checking the Search Box in our ebay store by typing in Make Model Year of your Vehicle.

HOW DIFFICULT IS IT TO INSTALL?
Usually with some patience most installs can be done with simple tools and take approx. 30min to 3hrs
(It depends on how many parts of your dash needs to be removed, and if your installing additions like Amp, etc.

Dash Kit ( Why its a Good Idea ) Why do I need a Dash Kit?
Today\'s cars have rounded edges, sometimes funky looking convex and curved stereo faces.

DashKits are designed tomatch your car radio console. For a Gapless fit with Aftermarket Radios.
Many auto makers factory radios are bigger than aftermarket radios (Some will need a Pocket or Delete Plate)
(Read Below) **

The sole purpose of an install dash kit, isto blend the new aftermarket radio so it looks like it belongs.
Professional Install shops use these very same Dash Kits when installing new Aftermarket Car Stereos

Radio in-dash installation kits are designed, specifically forparticular vehicles

* EXAMPLE : AFTERMARKET RADIO IS A SINGLE DIN & OEM RADIO WAS LARGER SIZED 2 DIN

(DEFINITELY WILL NEED DASH KIT - if wanting to close up the gaps)
What is a Single-DIN, 1.5DIN, Double-DIN & Shaft Radio Mean?
\"Single DIN\" = Standard Aftermarket Radio Size
\"Shaft Style\"= Old type of radios w/ Knob Controls
1.5 DIN = Mostly Used by GM (in the Late 90\'s - early 2000\'s)
2 DIN = Many Stock Import Radios - 2xs size of Single DIN (often referred to as a Double Din)Careful of Direct Imports from China & Abroad

Unfortunately there are a lot of Cheap Stereos being sold on ebay, that do not fit the AIAA Standards.
Many China radio models will not work with this kit: (Stick with Brand Names) just to be on the safe side.

Why? Because they make their 7in screens to fit into locations that do not require a fitment dash kit.
Not only are they oversized,some have Odd Wiring; and don\'t follow the 35yr old EIA color code.Don\'t havedetailed info from the Manufacturing Companies who make the vehicles.
Companies like Alpine, Clarion, Kenwood, Pioneer (exceptsome*AVIC), JVC all fit; due to industry collaboration. Morotorized flip screens have similar Issues*
Please Double Check the size of your aftermarket radio before purchasing this kit.

Boss and Eonon radios are notorious for being over-sized, please becautious when purchasing these radios.
There isNot aDash Kit on the market that will accommodate these oversized Non Branded Radios. In essence, you get what you pay for, and unfortunatelyit becomeseveryones problem on theirattempted profit.

Double Din kits are design for use with USA Standard Double Din radio models only that are 6.2\" 173mm x 99.8mmto 7\" 180mm x 102mm (anything over 180mm will need to be trimmed)

Its Doesn\'t Fit Don\'t Panic...
First, make sure you have a named brand Radio. ( as discussed above )
Secondly, there are a few reasons for this lovely and frustrating scenario
Please look and read the directions carefully, and then recheck the directions.

Some Radios slide in from front, and use the Metal Box, while others are ISO and slide in from back to front.
Usually ISO, the box isn\'t needed, and you\'ll attach the stereo to the side brackets of the Dash Kit.
(We\'ve doing this since the early 80s) - & still sometimes laugh at myself, because I didn\'t read the directions.Will I need anything else? Maybe; an Aftermarket Radio Wire Harness & Antenna Adapter (to keep FM Radio)
As earlier mentioned about Wire Harnesses being incorrectly wired from China... (this is on them) not us.
We Stock the same Professional Radio Wire Harnesses and Antenna Adapters, you\'d pay for at any install shop.
(in-fact) we are installers, we carry what we install and have knowledge of what we sell.

To check what type of Radio wire harness you may need, look in our ebay store for your Make Model Year.
if it lists parts, then you will need them, if you don\'t want to cut up your vehicle harness.
(for Stereo replacement) usually 3 things are needed.

1) Dash Fitments for Radio
2) Aftermarket Stereo Wire Harness
3) Antenna AdapterDo I need to re-wire things? No Re-wiring is needed, unless you have gotten a non-branded stereo.
FAQ: Why do I need a wire harness?
Simple it saves you time, headaches, and keeps your vehicles factory warranty
EIA color Coded (Name Branded radio and harness; simple color match)
No Splicing Required

How does it work? Basically Plug N Play
Simply start bypluggingtheplastic end into the wiring harness plugof your car
Then the other end with(the wires) goes to the wiring harness of theNew or Factory stereo
Easy E.I.A color coded (Just match upcolored wires to each other) Why do I need Antenna Adapter? Well, if you want to keep your AM/FM Radio working, this part is very important.
(Not all vehicles require an Antenna Adapter) - Type in your Make Model Year of vehicle.
IF your vehicle is listed, then it will be a required part to keep your radio stations.

How do you install this?
Easy, all you need to do its connect one end into your (Factory antenna plug that came out of your stock Radio)
Then, you connect the other end into the aftermarket radio. (as long as your antenna is still factory) this is all that is needed. (if you are interested in adding aux-inputs) then you would need to get an FM Modulation Box, and look for the FM Modulation wire set, we sell.

CLICK HERE TO FIND WHAT OTHER PARTS ALSO FIT

Vehicle Parts Guide-

All Related Parts (Quick Search)

Then Just Type inMakeModelandYear-

(Ex. Buick Century 99)


HONDA DOUBLE DIN Dash Install Kit for JAZZ Aftermarket Stereo/Radio 2007-2008

2007 - 2008HondaJAZZ DBL Din Kit color match (LEFT HAND DRIVE)

Accommodates ISO Double DIN (LF) SIDE DRIVER

  • Factory contour match
  • Factory Color matched
  • High strength ABS plastic
  • Includesdial labels and dash retaining clips
COLOR :Machined TO MATCH ORIGINAL COLORCONDITION :BRAND NEW
RADIO INSTALL DASH KITRetains the Factory Climate Controls in the Original Locations.Retains the Factory Passenger Airbag Light in the Original Location.Removable Oversized Storage Pocket with Built-In Radio Supports.Includes Parts for Installation of a Double-DIN Radio or Single-DIN Radio with Pocket.Quick Release Snap-In ISO Mount System with Custom Trim Ring.Recessed DIN Opening.Painted to Match the Original Color and Texture.Contoured and Textured to Match the Factory Dash.Includes All the Necessary Hardware for a Complete Install.Step-By-Step Instructions.Double DIN Radio Provisions.Stacked ISO Mount Units Provisions.

HONDAJAZZ2007-08


Powered by SixBit\'s eCommerce Solution


Parts Search:


Follow