This item has been shown times.
Click HERE for more information about this part.
Nissan KA24E T3/T4 Turbo Kit
- 89-90 Nissan 240SX KA24E SOHC 2.4L Engine.
- 90–97 Nissan Hardbody Truck KA24E SOHC 2.4L Engine.
- 90-95 Nissan Pathfinder KA24E SOHC 2.4L Engine.
- 89–95 Nissan Axxess KA24E SOHC 2.4L Engine.
- 89-95 Nissan Prairie KA24E SOHC 2.4L Engine.
- 90–92 Nissan Stanza KA24E SOHC 2.4L Engine.
- 89–92 Nissan Pintara KA24E SOHC 2.4L Engine.
- 89-92 Ford Corsair KA24E SOHC 2.4L Engine.
- 93-96 Nissan Terrano 2 Europe KA24E SOHC 2.4L Engine
- All Vehicles Run with Nissan KA24E SOHCEngine.
- This turbo kit is NOT COMPLETE turbo kit.Customers also need to custom make the downpipe to fit this turbo kit. Customers also need to upgrade the fuel pump,injector and ECU to tune the car if set at higher PSI.
- This turbo kit can gain 100-150 HP if it sets at 7-15 PSI.We offer 6 MONTHS warranty for this turbo charger!
- Brand new T3/T4 T04E .57AR turbo charger.Max up to 350HP.
- Inlet: 3.0 Inch. Outlet: 2.0 Inch.
- Turbine Flange: T3 Flange. Downpipe Flange: 2.5'' 5 Bolts Flange.
- Type of Bearing: Journal Bearings.
- Cooling Type: Oil Cooled Only.
- Oil Inlet: 1/8 NPT.
- Exhaust Trim: .57AR.Turbine Wheel Diameter: 54.06MM/65.20MM.
- Compressor Trim: .50AR.Compressor Wheel Diameter: 50.16MM/76.84MM.
- Brand new Nissan KA24E SOHC 2.4L cast iron turbo manifold.Made of high quality cast iron.WE OFFER LIFE TIME WARRANTY!
- Direct bolt on design.Higher resistance to heat.Allows power steering and air conditioner.
- It is good for huge horsepower increase along with improved more air flow,gain 10-15HP.
- T3/T4 turbo flange fits T3,T4 or T3/T4 turbo chargers,and fits 35MM/38MM turbo wastegates.
27''X7.0''X2.5'' Front Mount Intercooler:
- Brand new universal 27''x7''x2.5'' front mount intercooler. Made of high quality T6061 aluminum.
- Tube and fin design.High flow and light weight.Support up to 400HP and 35PSI.
- Compress air flow rate: 700cubic feet/min.
- Pressure drop: 0.2-0.5 at 15PSI, 2-5 at 35PSI.
- Full size: 27''x 7''x 2.5''.Inlet/Outlet: 2.5''
- Core size: 21''x 7''x 2.5''.
Universal 2.5'' PipingKit:
- Brand new universal 2.5'' polished aluminum piping kit. Made of high quality T6061 aluminum.
- This is great for turbo DIY project.Customer need to cut and bent the pipe to fit your car.
- 2.5'' inlet diameter,increase more airflow.It come with hight quality 4PLY silicone couplers and strong and tighter t-bolt clamp.it can support up to 400HP.
38MM Turbo Wastegate:
- Brand new universal 38mm wastegate,made of hight quality stainless steel hardware,mating weld flanges are 304L.
- Set at 7 PSI,comes with two extra 11PSI and 15PSI springs,fully adjustable.
- Only 4.35'' tall(good for customer working with tight engine compartment.
- Dual port.Accurate boost pressure,Ultra durable diagram.
Type-RSTurbo Blow off Valve Bov:
- Brand new type-rs turbo blow off valve bov. Made of high quality CNC billet aluminum.Including 2.5'' 2 bolt flange pipe,brackets,vacuum line and miscellaneous hardware.
- Our blow off valves are easily adjustable to prevent both permature boost leakage and compressor surge,and the valve to diapharm ratio provide performance that cheep piston types can not offer.
- Fast fesponse one for low and high boost pressure,it can hold max up to 1200 HP or 30 PSI.
Oil Return Line:
- Brand new 10AN oil drain/return line kit,made of hight quality stainless steel braided line and T6061 aluminum fitting.
- Length: 17''. ID: 0.5''.
- Helps circulate oil from the turbo to the oil pan.
Oil Feed Line:
- Brand new oil feed line,made of hight quality stainless steel braided line.Special designed inlet adapter limits oil flow,effectively prevent blown oil seal caused by excessive oil pressure.
- Length: 36''. ID: 3/8''.
- Comes with one 1/8 NPT male fitting and one 4AN male fitting.Has restriction build in,offers proper oil feeding to the turbo charger.
Fuel Pressure Regulator:
- Brand new fuel pressure regulator. Made of high quality CNC machined aluminum.Includes hardwares and hoses for installing.
- Manage your fuel system requirements,increase fuel delivery by rasing pressure.
- Adjustable 0-140 PSI(0-10kg/cm²) for maximum fuel pump capacity.
Turbo Boost Controller:
- Brand new turbo boost controller. Made of high quality CNC machined T6061 aluminum with anodized finish.Comes with hardwares for easy installing.
- Light weight design.Allow you to adjust PSI ratings(1-30PSI)without changing the wastegate springs as well as replacing the wastegate springs.
Oil Catch Tank:
- Brand new oil catch tank. Made of high quality T6061 aluminum.Come with aluminum bracket,hose and stainless steel clamp to mount your new reserve tanks.
- The oil catch tank collects the oil mist and condenses the fuel vapors while allowing cleaner gases to be passed back into the intake.It will ensure better performance and better mileage on your engine.
inlet size:0.3'';Hold up to 750ML.
- Item exactly the same as picture shown.
Instruction is NOT included.Professional installation is highly recommended.
Please check out my store for other parts.
- Only Accept Paypal (Immediate Payment Is Required)
8.75% For Those Addresses In California.
- Item Will Be Shipped Here In Los Angeles, California. Will Use UPS, USPS,OrFEDEX.
- US Shipping Rate Applies To The Contiguous 48 States .
- Canada Shipping Rate Applies To Hawaii, Alaska,Puerto Rico,APO, FPO, GuamAnd The P.O. Box.
- International Rate Applies To All Other Locations.
We Guarantee 100% Satisfaction On Our Products, And Top Notch Customer Services.
Item Can Be Returned/Exchanged Only If The Items Are Found Defected Or Wrong Item On Arrival. If item Need To Be Exchanged, Items Must Be Returned Within 7Days From The Date Of Authorized For Exchange.
All Presumed Defective Or Wrong Items Must Obtain An Authorization BeforeReturing. Any Returned Package Without Authorization Will Put On Hold Or Refused.
Buyer Is Responsible For Return Shipping Cost And Insurance. Please Note That Shipping And Handling Are Not Refundable.
IfYouHaveAny QuestionOrAny problemAboutOur Productplease ContactMe By SendingA Message Via , or Sending An So That We Can Resolve All TheIssues Or Problems That May Arise During Our Transactions.
Thank You For Viewing Our Listing And Taking The Time To Read Or Terms And Conditions Of The Sale Of Our Products. Please Check Out Our Other Products.
Similar 1/4 mile timeslips to browse:
1980 Datsun Stanza GX: 12.679 @ 109.500
Nick Diggles, Engine: L20b, Turbos: GT30 Tires: 195/50/15
1980 Datsun Stanza GX: 13.124 @ 112.700
Nick Diggles, Engine: L20b, Supercharger: no Turbos: GT30/76 Tires: 175
1980 Datsun Stanza : 13.400 @ 105.880
Nick Diggles, Engine: L20B, Turbos: T3 Tires: 195 Dunlops
1980 Datsun Stanza sedan: 13.800 @ 103.000
duncan, Engine: L20B, Turbos: 1 Tires: hancook 215x 50
1991 Nissan Stanza : 13.840 @ 103.990
Andy Gussie, Engine: KA24E, Turbos: Garrett T3
1980 Datsun Stanza sss: 14.200 @ 102.100
christopher cassidy, Engine: L18, Tires: bridgestone 205/60R13
1979 Datsun Stanza : 15.200 @ 97.000
steven alexander, Engine: L20B (bluebird),
1990 Nissan Stanza : 16.184 @ 84.280
Alphonso, Engine: 2.4l SOHC 12V 138hp stock,