When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $150.00
Application:
- For 02-06 Acura RSX/Type-S. (No modification need for RSX application, still keep center console cover on.)
- For 89-00 Honda Civic K-Series Swap EF, EG, EK, DC2.
- For 94-01 Acura Integra K-Series Swap EF, EG, EK, DC2.(K-Swap chassis will require removal of center console piece and cup holders.)
- Not fit K24Z7 Transmission. Only Manual Transmission!
Vehicle compatibility charts are for REFERENCE ONLY. Check product type and size to match your needs.
Specification:
- 100% quality assurance tested, more responsive, less expensive, easier to install.
- Race-spec super strong / stretch resistant/ flexible/ high strength shifter cables.
- Perfect replacement for the broken shifter box, especially designed for professional core racers.
- Eliminate all the bending and looseness that the factory raw plastic box can feel.
- A simpler fixing of the elbow position to change the height, meets or exceeds original equipment specifications.
Material & Color:
- Material: made of high quality Stainless Steel, Aluminum & Iron.
- Color: as picture.
Package Included:
- 1x Shifter Lever;
- 1x Shifter Gear Base;
- 3x Allen Wrench.
- 1x Shifter Knob;
- 3x Black Bushing.
- 2xShifterCable;
- 1xTransmissionBracket;
- 3xBracketSpacer;
- 3xBracketScrew;
- 2xCotterPin. (100% Brand New Never Used Or Installed)
Installation Steps:
Install Shifter Base Plate & Base:
- 1. Anchor front 2 points to install shifter base plate.
- 2. Drill 2 holes and clean up.
- 3. Apply glue and install base plate.
- 4. Install gear base by bolting 4 points with spacers.
- 5. Install 2 shifter cables to base. Tighten corresponding 2 screws.
- 6. Install the gear lockout according to your actual needs and done.
Install Shifter Cables & Trans Bracket:
- 1. Take console and shifter box out. Loosen 2 pins, 1 metal pin and 1 twisting clip of shifter cables.
- 2. Push down rubber cover where cables run into. Keep pins and rubber.
- 3. Open hood, loosen cotter pins and metal pin on the end of shifter cables.
- 4. Pushing inside the car, pull cables out of engine bay. Install new trans bracket. One side need spacer.
- 5. Install new shifter cables on trans bracket.
- 6. Connect shifter cables to shifter seat.
Please be sure your shipping address is correct.
We will only follow your address listed at the payment for the shipment.
Ifyouhaveanyquestionsatall,pleasefeelfreetoask.
Import duties,taxes and charges are not included in the item price, please check with your country customs office for these additional charges.
Delivery details99% of orders shipped within 24 hours.
Tracking number will be added to ebay after the shipment, u can track the item status on 17 track net.
It\'s usually delivered within 1-5 business days,If it takes longer than this time, please contact us and we will explain the reason and deal with it. Thank you for your understanding
Above time are for reference ONLY. Shipping might be delay by holidays, events and other uncertainties.
ReturnIf you don\'t understand anything, please contact us and we will try our best to solve the problem.
Feedback will be automatically left to every buyer who completes the transaction and leave positive feedback.
We Have FREE Retrurn. Once we receive your returned items, we will refund them immediately.
About us- Always Free Shipping with your Parts orders.
- Lowest price on brand new, in-the-box auto parts.
- Business time is Monday - Friday 9:30 am to 6:30 pm HKT except all Holidays.
Please send all correspondence through the eBay messaging system.
All eBay message will be replied within 24 hours of receipt or sooner.