When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $140.00
Free Priority Shipping! Buy from someone you can trust w/ 15+ years of retrofitting experience! Our Feedback says is all!What\'s Included:
- PROJECTORS: 2x Morimoto Mini D2S 4.0 Bi-xenon
- HARDWARE: 2x EZ Lock Rings, Bulb Caps, Etc
- SOLENOID INPUTS: 2x 9006 Male Pigtails
- WARRANTY: 3 Years
- APPLICATIONS: Universal (cars/trucks/motorcycles)
- DIRECT FITMENT: H4 Headlights (little/no mods required)
- MODS REQUIRED: H1,H7,H11,H13,9005,9006,9007 housings
- OUTPUTS: Low and High Beam
- UNITED STATES: LHD (Left Hand Drive)
- AU, UK, JAPAN: RHD (Right Hand Drive)
- BULBS: D2S/D2H HID Only
- HID SYSTEMS: 35w and 55w
- SHROUDS: All Styles Except Mini Gatling/Graphite
- CENTRIC RINGS: Not Required
- CERTIFICATIONS: Exceeds DOT requirements
- HEIGHT: 85mm
- WIDTH: 102mm
- DEPTH: 148mm
- LENS DIAMETER: 3.0\" (Round Lens Model)
- MOUNTING SHAFT: Diameter = 35mm
- LOCK NUT: Size = 46mm
- HOUSING DEPTH: 117mm Minimum
- STANDARD LENS: 100% clarity \"Kuria Optic\" glass
One Two Three:
Four! Truth be told, for a bunch of headlight nerds: We could not imagine a more perfect projector. The all-new Morimoto Mini D2S 4.0 Bi-xenon takes the cake in every category. A supreme low beam. A High beam so bright it\'s unholy. A cutoff line that can\'t get any sharper. Quality that nobody can question, and an undeniable ease of installation. If we died and went to headlight heaven, this thing would be greeting us at the gate.
Legendary:
When Morimoto Mini D2S 3.0 came out in 2013, it changed the game. When the Mini H1 7.0 launched in 2015, it changed the game. The Mini D2S 4.0 carries on the tradition – and why? Not only does it make the 3.0 look like an old dinosaur...but because it\'s powered by D2S bulbs; it\'s capable of taking the awesome optics developed for the H1 7.0 to a whole new level.
Output:
We\'ll just start with the hot spot. It\'s brighter than any bi-xenon projector we\'ve tested...in fact, it\'s so bright that it exceeds the maximum amount of intensity allowed by DOT even at 35W. The beam pattern is extremely wide and flat, with none of the bowing found on the 3.0...all thanks to the beauty in the center of this beast: it\'s curved cutoff shield. The Kuria Optic clear lens helps produce plenty of color flicker, but also a razor sharp cutoff line that eliminates all glare to oncoming traffic. Last but not least, the high beam. Shaped by the secondary cutoff shield, there\'s plenty of light reserved for use here to penetrate for hundreds of meters at night.
Physically Speaking:
Output isn\'t the only thing the 4.0 gets praise for. It\'s clear they\'ve paid a lot of attention to the physical attributes too. The threaded shaft is longer than before, making it easier to install, and it\'s threads are silky smooth (near impossible to strip). The bi-xenon solenoid mechanism has next to no slack, and thankfully this time, the solenoid input actually plug into the back of the projector. The black lens holder gets the cool “4” cut out too! OEM Quality, aftermarket performance. We like it!
Easy to Install:
Picking out a projector always meant striking a balance between a) how much light output you wanted, and 2) how much time and effort you were willing to afford to get it done. The Morimoto Mini D2S 4.0 sacrifices nothing in the light output department while remaining amazingly easy to install. Unfortunately for big ass bi-xenon projectors like the Acura TL, Murano, or FX-R; there\'s really no reason to cut, trim, and JB Weld the hell out of everything just to achieve output nirvana, and it probably wont be long until they find a new home in our closeout category.