When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $34.95
Untitled Document D2S/D2R Replacement Ballast for OEM HID
Cutting required! Must cut out your old ballast (2 wires) and remove your old ballast and ignitor as shown above. This ballast will need to be wired to your old connector that powered your ballast and mounted anywhere.
The easy and cost effective solution to fixing old ballasts that have failed!
IMPORTANT!
Re-wiring required to power the ballast. Required on cars which do not have this type of connector shown on the left. Yes this means cutting the factory connector. This means the power plug to our ballast is different than your factory ballast. An easy modification. Save yourself $ by just cutting or splicing into two wires.
Package contents: One D2S/D2R Ballast + all wiring (NO INSTRUCTIONS OTHER THAN BELOW)
Warranty: 12 Months High quality replacement part at fraction of cost of dealers. \"May require re-wiring to ballast\" Fits most european cars with D2S/D2R Ballast. Please compare your ballast in your vehicle with this item. If the input connection looks the same, these will work without any wiring. Otherwise, you will need to cut your factory connector leading to your ballast- Connect the Positive and Negative to the Red/Black wires of the input wire of this ballast. Save $$ over OEM ballasts sold at the dealer for $300!