When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $148.74
LED DRL Tube Headlights For 2005 2006 2007 Ford F250 F350 F450 Super Duty Black
Item Description:APPLICATION:
For 2005Ford Excursion US models only
For 2005-2007 Ford F-250 Super Duty
For2005-2007Ford F-350 Super Duty
For2005-2007Ford F-450 Super Duty
For2005-2007Ford F-550 Super Duty
Do not fit with the Sealed Beam Headlight model
FEATURE:
High Beam Bulb Type: H13(bulb not included)
Low Beam Bulb Type: H13 (bulb not included)
Turn SignalLightBulb Type: 3157A(bulb not included)
Side Marker LightBulb Type: 194NA(bulb not included)
Black Housing Clear Lens With Amber Reflector
Placement on Vehicle: Front, Left, Right
Made of material that meet or exceed OEM requirement
Type: LED DRL Headlight
PACKAGE INCLUDES:
1 Pair LH (Driver Side) + RH (Passenger Side) Headlights
INSTALLATION GUIDE:
Before you begin to adjust the light, make sure to check the alignment of your lights first. Park the vehicle about 10 to25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than3.5 feet above the ground.
1. Find the adjustment screws. Firstly, locate the adjustment screws on your vehicle.
2. Adjust the headlights individually. The headlights should be adjusted one at a time. Put a rag or towel over a chair infront of the light you want to block. Covering the light assembly directly can damage the plastic lens.
3. Adjust the vertical field. The screw on the top of the light housing should be turned clockwise to raise the lights andcounterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the lightbeam shines directly on or just below the center of the tape line on the wall.
4. Adjust the horizontal field. The screw on the side of the light housing should be turned to get the right/left adjustmentcorrect. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.
5. Test your results.
NO MORE CONDENSATION WORRIES
Clear cover mists up because of the temperature difference instead of malfunction.
HOW TO SOLVE:
Method 1: Take the bulbs out & let the inside cover dry.
Method 2: Throw a silica-gel drier or apply some glue to the gap if the fog still exists.
Method 3: Check that vents aren't blocked and switch on the low beams for about 20 mins
More Display:On Mar 13, 2023 at 18:33:20 PDT, seller added the following information: