When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $160.00
New for 2017- Kamotors E36 M3 V1 Carbon Race intake system for 3.5\" euro HFM and M60 MAF conversions to U.S. motors. 100% carbon fiber piping and angled silicone coupler. Designed w/ bimmerworld throttle boot but will work with other similar products. Places filter outside engine bay for the coldest air and loudest induction noises.
Designed on a u.s. spec 95 m3 with S50b30US. Video of intake sound-https://youtu.be/GxoZsmWL-fM
entire kit weights ~2lbs
Fits with euro headlights, lightest weight cold air intake available for e36.
Due to size and placement of filter some modifications may be necessary depending on your current throttle body boot. If you are not willing to do these modifications than do not purchase(NO RETURNS).
Modifications including-
* Horn relocation- Frame rail side horn will need to be removed w/ bracket and can be mounted somewhere else or left off.
Fender side horn just needs to be loosened and rotated out of the way,
* Designed with brake duct removed and depending on your throttle boot and carbon pipe angle you may need to trim the inner fender liners rectangular brake duct protrusion.
*Filter is to be installed onto the carbon pipe and then slid into engine bay from below. Installation takes 30-40min.
* rotating the supplied angled coupler will control depth and position of filter so rotate to position that achieves the most fender liner clearance.
* no support bracket needed or included at the moment
Includes-
2x hose clamps
1x silicone angled coupler
1x real carbon fiber pipe
1x K&N air filter