When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $109.99
- 5 Lug Wheel Spacers
- 6 Lug Wheel Spacers
- 8 Lug Wheel Spacers
- Dodge Leveling Kits
- Chevy/GMC Leveling Kits
- Toyota Leveling Kits
- Ford Leveling Kits
- Full Leveling Kits
- Jeep Leveling Kit
- Front Lift Kit
- Rear Lift kit
- ATV Leveling Lift Kits
- Honda
- BMW
- Audi
- Subaru
- Nissan
- Dodge
- Chevy
- Ford
- Jeep
- Toyota
- M14X1.5 Spike Lug nuts
- 1/2\'\' Spike Lug nuts
- 9/16\'\' Spike Lug nuts
- M14x2 Spike Lug Nuts
- Stock Key
- M12x1.5 Spike Lug Nuts
-Make your car more aggressive stance, insure longer life and provide better driving experience.
-Made of aircraft aluminum billet, use precision maching and with 10.9 degree lug nuts to increases safety. Vehicle&Wheel bolt pattern:5x5 to 5x5(5x127);
Hub Bore: 71.5mm;Thickness:1.5\"(38mm) or 2\"(50mm) Thread pitch: 1/2\"-20
Quantity:4PC JK --- 2007-2018 Jeep Wrangler 4WD
JK --- 2007-2018 Jeep Wrangler Unlimited 4WD
JK --- 2007-2010 Jeep Wrangler Unlimited 2WD
XK --- 2006-2010 Jeep Commander
WJ --- 1999-2004 Jeep Grand Cherokee
WK --- 2005-2010 Jeep Grand Cherokee 2008-2021 Dodge Journey
Before Installation1. Please check the model and the product specifications before purchase.2. For 1.5 inches or less thickness
if the stock studs are longer than the adapters, and the wheels do not have hollow spot in them,
you may need to grind, or cut your existing lugs if you don\'t choose to purchase shorter studs.
3. For 2 inches or more thickness
if the stock studs are shorter to hold the spacer safely,
you need to exchange to small size adapters or purchase longer studs yourself.4. Use wire brush to clean gunk firstly. And it will better put some loctite on the hub and thread pitch, which will be easy to install.During Installation
1、Alloy wheels should always be installed using a torque wrench ensuring proper mount.DO NOT USE AN IMPACT WRENCH!
2、DO NOT proceed if both of the wheel spacer do not fit.
3、It is also important to tighten lug nuts or bolts incrementally to the final torque specification, and doing so in the proper sequence.After Installation
1.Please re-torque all lug nuts after 25-50 miles of driving, then again every 1-2,000 miles.(It is recommended that the torque should not be lower than 90ft / Lbs)2. Any questions,please contact us any time~