When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $39.99
Excellent-parts2022
2pcs 1.25" Thick 5x4.75 Wheel Spacers 12x1.5 Studs For Chevy S10 Blazer CamaroSPECIFICATION:
Thickness :1.25 Inch /32mm
Vehicle Bolt Pattern: 5x4.75 inches/5x120.7mm
Wheel Bolt Pattern: 5x4.75 inches/5x120.7mm
Thread Size: 12x1.5 Studs
Center Bore: 3.429 inches /87.1 mm
Condition: Brand New
Fitment:
Buick
1979-1985 Buick Rivera FWD -Not Fit for 1986-1999 Rivera
Cadillac
1979-1985 Cadillac Eldorado -Not Fit for 1986-2002 Eldorado
1976-1980 Cadillac Seville -Not Fit for 1981-2004 Seville
2004-2009 Cadillac XLR
2004-2009 Cadillac XLR-V
Chevy
1982-2002 Chevrolet Camaro -Not Fit for 1967-1981
1984-2015 Chevrolet Corvette All Series
1982-2004 Chevrolet S-10 Pickup 2WD-4WD
1983-1994 Chevrolet S-10,S-15 Blazer
GMC
1982-2002 GMC Jimmy 2WD-4WD
1991-2004 GMC Sonoma 2WD
1992-1993 GMC Typhoon
Oldsmobile
1991-2001 Oldsmobile Bravada
Pontiac
1967-2002 Pontiac Firebird
Package List:
2pcs Wheel Spacers
Installation Procedure:
Step 1:
Following your vehicle owner's manual, proper raise the vehicle and support it using adequately load-rated jackstands.
Remove wheels and inspect rotors for any damage or cracks. If any damage is identified, don't continue with this installation.
Remove any wheel visible rust from the mating flange on the vehicle's rotor. Check both the rotor and wheel mounting flanges for burns, rivet heads, or other obstruction which could prevent proper seating of the spacer/adapter.
Step 2:
If proper seating can be achieved, apply provided thread locker to vehicle's studs and mount the wheel spacers on to rotor by torquing provided wheel spacers/adapter lug nuts. Tighten all lug nuts to the appropriate torque specification using a torque wrench.
Install wheel on to wheel spacer using existing lug nuts. Tighten all lug nuts to the appropriate torque specification using a torque wrench.
DO NOT USE AN IMPACT WRENCH.
Step 3:
Check that wheel and tire clearance allow for full steering(lock-to-lock).
If there is no interference, vehicle may be lowered.
Re-check torque after traveling the first 50-100 miles, then again every 2000-3000 miles
Item SpecificsBrand KYXPlacement on Vehicle LeftThickness 1.25 inchesVehicle Bolt Pattern 5 x 4.75 inches/5x120.7mmWheel Bolt Pattern 5 x 4.75 inches/5x120.7mmThread Size 12 x 1.5 STUDSCenter Bore 3.429 inches / 87.1 mmMaterial Forged 6061 Aircraft AluminumStud Grade 10.9Item Condition Brand NewFull Warranty YesBolt Length 34±0.3mmWarranty 5 Year
Payment
1.WeonlyacceptpaymentfromPaypal.
2.Pleasemakesureyouhaveavalid/confirmedPayPalaccountpriorbidding.AllPayPalPayments
mustbeConfirmed(Shippingandbillingaddressesmustmatch).
3.PaymentShouldbeCompletedwithin7days,oranunpaiddisputedwillbeopenedaspayment
nonereceive.
Shipping1.Allitemswillbeshippedwithin1businessdayuponreceiptofpayment.
2.Itusuallytakesapproximately3-7businessdaystoreceiveorder,notincludeweekendandholiday.
3.Deliverytimedependsonpostalprocessandotherfactors;
4.Ifyoudonotreceiveyouritemontime,pleasecontactusimmediatelyforfurtherassistance.Wewillbe
responsibleforanydamagesorlossesincurredintheshippingprocess.
5.Seriouslypromise:
Refundorresendwillbeofferedifitemstillnotarrivein10businessdays.Justsendusanemail,
wewillgiveyouasatisfiedsolutionassoonaspossible
Excellent-parts2022
DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Shop CategoryStore Home Car Catalytic Converter Car Air Intake System Car Turbo Turbocharger Car Wheel Spacers Car Shock Absorbers Intercooler & Heater & Other OtherHot Item (4) 25MM 5x4.5 5x114.3mm Hubcentric Wheel Spacers 12x1.5 Studs For Honda Acura USD 60.99 5x120 Staggered Wheel Spacers Kit (2) 15mm & (2) 20mm W/ Extended Bolts For BMW USD 57.90 2pcs 2\" Thick 5x4.75 Wheel Spacers 12x1.5 Studs For Chevy S10 Blazer Camaro USD 39.99 2PC 3 INCH 75MM ¦ 5x114.3 ¦ 66.1 CB ¦12X1.25 ¦ HUB CENTRIC WHEEL SPACERS ADAPTER USD 59.79 4pc 1.5 inch 6x5.5 Hub Centric Wheel Spacer 14x1.5 For Chevrolet GMC Sierra 1500 USD 105.59 New List Item 2pcs 2\" Inlet/Outlet Universal Catalytic Converter High Flow Stainless Steel EPA USD 61.59 Pair Front Struts w/Coil Spring For 2010 2011 2012 Buick LaCrosse FWD 2.4L USD 148.59 Red Cold Air Intake Kit + Heat Shield for 05-10 Dodge Chrysler 5.7L 6.1L V8 USD 54.59 2Pcs Front Struts w/ Coil Spring Assembly for 2011 2012-2016 Hyundai Elantra USD 116.59 4Pcs 5x4.5 to 5x5 1.25\" Wheel Spacers 1/2\"x20 For Jeep Wrangler Ford Mustang USD 77.59 Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout Us 2pcs 1.25" Thick 5x4.75 Wheel Spacers 12x1.5 Studs For Chevy S10 Blazer CamaroSPECIFICATION:
Thickness :1.25 Inch /32mm
Vehicle Bolt Pattern: 5x4.75 inches/5x120.7mm
Wheel Bolt Pattern: 5x4.75 inches/5x120.7mm
Thread Size: 12x1.5 Studs
Center Bore: 3.429 inches /87.1 mm
Condition: Brand New
Fitment:
Buick
1979-1985 Buick Rivera FWD -Not Fit for 1986-1999 Rivera
Cadillac
1979-1985 Cadillac Eldorado -Not Fit for 1986-2002 Eldorado
1976-1980 Cadillac Seville -Not Fit for 1981-2004 Seville
2004-2009 Cadillac XLR
2004-2009 Cadillac XLR-V
Chevy
1982-2002 Chevrolet Camaro -Not Fit for 1967-1981
1984-2015 Chevrolet Corvette All Series
1982-2004 Chevrolet S-10 Pickup 2WD-4WD
1983-1994 Chevrolet S-10,S-15 Blazer
GMC
1982-2002 GMC Jimmy 2WD-4WD
1991-2004 GMC Sonoma 2WD
1992-1993 GMC Typhoon
Oldsmobile
1991-2001 Oldsmobile Bravada
Pontiac
1967-2002 Pontiac Firebird
Package List:
2pcs Wheel Spacers
Installation Procedure:
Step 1:
Following your vehicle owner's manual, proper raise the vehicle and support it using adequately load-rated jackstands.
Remove wheels and inspect rotors for any damage or cracks. If any damage is identified, don't continue with this installation.
Remove any wheel visible rust from the mating flange on the vehicle's rotor. Check both the rotor and wheel mounting flanges for burns, rivet heads, or other obstruction which could prevent proper seating of the spacer/adapter.
Step 2:
If proper seating can be achieved, apply provided thread locker to vehicle's studs and mount the wheel spacers on to rotor by torquing provided wheel spacers/adapter lug nuts. Tighten all lug nuts to the appropriate torque specification using a torque wrench.
Install wheel on to wheel spacer using existing lug nuts. Tighten all lug nuts to the appropriate torque specification using a torque wrench.
DO NOT USE AN IMPACT WRENCH.
Step 3:
Check that wheel and tire clearance allow for full steering(lock-to-lock).
If there is no interference, vehicle may be lowered.
Re-check torque after traveling the first 50-100 miles, then again every 2000-3000 miles
Payment
1.WeonlyacceptpaymentfromPaypal.
2.Pleasemakesureyouhaveavalid/confirmedPayPalaccountpriorbidding.AllPayPalPayments
mustbeConfirmed(Shippingandbillingaddressesmustmatch).
3.PaymentShouldbeCompletedwithin7days,oranunpaiddisputedwillbeopenedaspayment
nonereceive.
Shipping1.Allitemswillbeshippedwithin1businessdayuponreceiptofpayment.
2.Itusuallytakesapproximately3-7businessdaystoreceiveorder,notincludeweekendandholiday.
3.Deliverytimedependsonpostalprocessandotherfactors;
4.Ifyoudonotreceiveyouritemontime,pleasecontactusimmediatelyforfurtherassistance.Wewillbe
responsibleforanydamagesorlossesincurredintheshippingprocess.
5.Seriouslypromise:
Refundorresendwillbeofferedifitemstillnotarrivein10businessdays.Justsendusanemail,
wewillgiveyouasatisfiedsolutionassoonaspossible
All rights reserved.
On Feb 12, 2023 at 18:23:40 PST, seller added the following information: