2Pcs High Performance Low Impedance 1600cc 160LB EV1 Top Fuel Injectors for Sale

---

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

---

Price: $74.98

TWO YEARS WARRANTY

TheseLow Impedance fuel injectors are notmade bythe original equipment manufacturers(OEM)(BOSCH & VDO etc.)They have been 100% tested and exactly match the internal coil resistance and fuel flow rate of OEM fuel injectors.The individual flow characteristics and fuel atomization of above fuel injectors are almost same to or superior to the OEM and will help accelerate response time , save gasoline and improve MPG..

Features

Quantity: 4 Fuel Injectors
Condition:100% BRAND NEW
Design: Bosch GEN III EV1 Style Fuel Injector
O-Rings Included: Yes, preinstalled
Injector Design: Metal & composite plastic
Orifice Type: 1 hole
Connector Type: Bosch EV1(Minitimer,Jectronic)
Filter Design: Basket filter design at inlet
Fuel Delivery: Single Nozzle Cone Shape
Spray Pattern: 15 Degree Spray ConeSpecification
Coil Resistance: 3.0 Ohms /Low Impedance
Static Flow Rate 1600cc/min = 152 lb/hr at 43.5PSI ( 300kPa ) Gain: 0.12ms/MG
Offset: 0.055ms
Turn on time 1.14ms at 14VDC
Turn off time: 0.85ms at 600KPaVoltage: 8-15 Volts, nominal 13.5 Volts
Amperage: 1.0 Amps
Pressure: Min 30PSIG/ Max 100PSIG
Overall Length: 2 7/8 inches, 74 mmO-ring to O-ring Length: 2 1/2 inches, 63 mmDiameter: 16 mmOrings: Top and bottom, 14.5 mmWarranty: 2 Years

Application

TheseLow Impedance(3.0 ohms) performance injectors will fit aftermarket high performance engine, Please check technical data to see whether it works for your model.These are Bosch EV1 style injectors which work on Most Bosch fuel injected vehicles.If you original injectorsconnectors are EV6 & EV14 style, pls advise by ebay messagewe can include the EV1 connector and clips for free. Then customers can cut off both harness and splice them to work.

Note

· YOU MUST HAVE THE ECU SETUP FOR LOW RESISTANCE TO RUN THESE INJECTORS
· THESE HIGH PERFORMANCE INJECTORS WILL REQUIRE ECU TUNING
· INJECTOR CLIPS MAY BE REQUIRED FOR SOME MODELS

The following is one installation instruction sample for 1995 Corvette LS1 for reference

install 2

Shipping

· handling time: 1 days
· Shipping time: 1-5 business days in USA
· Shipping Cost : Free to all 50 USA states including Puerto Rico, Hawaii and USA Territories.
· After shipping, the tracking No. available by message

· We ship to eBay address

.
Return

· No returns are accepted without an RMA number.

· Refund is valid within 30 days after the date delivered

· Refund will be given as money back or replacement

· The money less the freight cost will be refunded due to their own fault
· Item must be returned in original packing same as reached
· Buyers are responsible for the return shipping cost.
Warranty·Two Years Warranty after receiving
· Buyers pay return and replacement shipping cost

· We will not refund any labor costCustomer Service

· Any question will be replied within 24 hours except the weekend and holiday.

---