When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $33.13
5 X T10 194 White LED Cab Roof Running Marker Lights+Wiring Pack
Item Description:This is For 1980-1997 Ford F-150/F-250/F-350/F Super Duty stock roof cab marker. Positioning & drilling is needed when installed on other vehicles. You may also need silicone gel or other material to cover the hole. Please make sure you can handle all the operation before buying, in case of any hassle.
1.For 12 volts
2.Number of Bulbs: 5PCS Cab Roof Running Marker Light + Wiring Pack
3.Color: White
4.LED Type: 5-5050-SMD LED High Power
5.Application: Roof Cab Marker , Roof Running Light, Clearance Light
- Much Brighter than regular LEDs with high power chips, ideal replacement for dull and yellowish stock bulbs
-Faster on/off response time and vibration resistant
-High performance LED, long lifespan, superior illumination & stability
-Come with T10 plug socket, convenient for modifying & rewiring
-Soft pads included, fit for fast feet or curved roof
Installations:
1.Preparing:
a)Always test the roof lights with 12V current power source first to assure working condition.
b)Remove everything attached to the inner headliner, including sun visors, lights and control panel if there\'s any. Remove the pieces under the four corners inside the cab.
2.Positioning (if your vehicle doesn\'t come with stock roof lights): Use a large piece of paper or some adhesive tape to dimple the drill hole position. Use the Roof Light to draw position of the screws, which is the drilling point. Use the soft pad to mark another hole for the positive and negative wires.
3.Wiring: All the roof lights come with T10 plug, with Black color Positive & White color Negative wires. You can just cut off the plug. Starting from the furthest from driver side, splice the light\'s positive wire to the end of the very long red wire, using the splice connector. Wire the light\'s negative wire to any metal surface or negative ends of any circuits. Repeat this step with each of the other lights in sequence. Tap all the wires to the roof securely when all done
4.Connect the metal end of long red wire to the switch’s OFF end.
5.Connect the metal end of short red wire with fuse to the switch’s ON end. Mount the switch under the dash. Wire this end to a constant positive lead.
6.Diagnosis: Test the roof lights before your put everything back. If the LED DO NOT light up:
a)Make sure you splice the roof light’s POSITIVE wire to the very long red wire.
b)Check in-line fuse.
c)Check connections.
d)Check hot lead connection to insure constant power source.
Package Includes:
5 x Cover with Base Housing
5 x LED Bulb
1 x Wiring Pack (Switch x 1, Short Wire with Fuse x 1, Long Wire x1, Metal Screws x 10, Plastic Ring x 10)
Other Accessories NOT Included.
Note:
If the LED won\'t light up, simply flip it 180 degrees (reverse the polarity)
Wiring Pack included, all you need for replacing the stock harness or other modifying & rewiring.