This item has been shown 0 times.
AUTO SPRING KITS
You arepurchasingaFront 2 inch Lift /leveling kit for the 2007-2013 Toyota Tundra 2WD-4WD.
This kit is manufactured in America by Auto Spring Kits. Manufacturedfrom heavy dutysteel not plastic or aluminum that can break down or corrode!!! We have been manufacturing and installing a similar leveling kit for the new generation Ford F-150for over nine years. Wehave sold over 30,000 kits to Ford dealers,service shops,and happy Fordowners throughout the World. See what Ford, Dodge,Chevy andNissanowners are saying about our kits in our E-BAY response. 100% positive
Due to popular demand we are now manufacturing and offering a 2 inch Front lift/levelingkit for the 2007-2013 Toyota Tundra4wd/2wd
NO STRUT DISASSEMBLE IS REQUIRED TO INSTALL OUR KIT .Other kits require you to completely remove the struts and disassemble them with a coil compressor tool (and it better be a heavy duty one cause the factory coils are stiff). They claim 1.5 hrs (for a suspension mechanic with the right tools on a good day).
Our Steel spacer simply bolts on top of your existing strut.. Thefront spacer will lift the front end @2 inches due to the suspension geometry and control arm angles.This still leaves the front slightly lower than the rear, which is perfect if you plan on hauling loads or towing trailers. After installingthis kit you can easily clear 33" tires......We designed this kit with strength and ease of install in mind. We use the highest quality materials, including: Zinc plated hardware and Nylock nuts. Ourfront spacersarefabricated from heavy U.S. steel and 1/4" thick wall D.O.M tubing.These babies won`t break. !!! GUARANTEED FOR LIFE !!!.This kitWILL NOT CHANGEyour factory soft ride at all. No special tools required and the kit only takestwo and half hours to install!! L@@k!Your coils areSTEEL and your struts are also, so why use plastic in between!! FREE SHIPPING IN THEU.S.A. Buy with confidence.In stock ready to ship the same day they are purchased (except on the weekend and holidays of course)... Lifetime Warranty.If you would like any questions answered about installing this kit or it's installation procedures call us at 1-800-345-0431 or 208-362-0431,Mon -Fri 7:30-5:00 mountain or E-mail us.
Our kits comes complete with2-Front Lift/Leveling spacers, 8-Grade 8.8 zinc plated Nylock nuts .Also includedareeasy to follow installation instructions and the spacers comes standard painted in Gloss black polyurethane finish..
If you have beenlooking atthe variousToyota and Nissan forums , you have probably read about the problem with premature strut failure. This failure is caused by installing a spacer (plastic or aluminum) in between the coil. This pre-loads the strut/coil causing a much stiffer ride but also over-extends the strut shaft causing the strut to leak and fail, and in some severe cases completely separate. NOT
Our kit WILL NOT cause the struts to fail becauseoursteel spacerssimply bolt on top of the strut, not in-between. NO COIL/STRUT PRE-LOAD AND THE FACTORY SMOOTH RIDE IS UN-CHANGED. Our lift/leveling kit also works on trucks with the Factory equipped Rancho off-road package.
Note: After installing this or any other lift/leveling kit you will need to re-align the front end. However, only toe in will need to be corrected. NO SHIMS oradditional parts are required.
Shipping toCanada via USPS priority airmail (3-5 days delivery and NO DUTY FEES or TARIFFS).