When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $29.99
2 (1 pair) of new Extra bright high-quality LED 6v to 32v DCdouble-contact mini headlight bulbs with lower-bottem even tabs replacement for many applications that callfor a 6 volt to 32-volt DC dual-contactbulb (high & low beam) for aheadlight (generally 6-to-12-volt, 25 wattor higher watt).Seepictures for the bulbs' base.These bulbs fit directlyinto yourlight sockets.They are dual non-polarity so theyWILL work with a positive or negative ground system.They arebrighter, last longer, use less watts (but are 10x brighter per watt), and willnot melt your lens if kept on too long. These bulbs canrange from 6-voltto 32-voltDC so there's no need to worry if your machine produceshigher than 12-volts (32-voltsbeing max).
These bulbs will NOT work withan AC system and will short in seconds and will not work with a positive ground system.
Will fit most 1930s passenger cars and trucks including: Chrysler,General Motors, Ford, Hudson, Nash, Packard, Studebaker, and many others (seelist below).
These bulbs are custommade with a front projection lens, the beam angle is 360 degrees, they have asteel base and an alloy body. They are about400-500% brighterthana standard bulb!However, it is the front projection lens that makes themso effective. They are engineered better thanother bulbs.
If you need a single-contact bulb please see this listing,Click here for single contact bulb
If you need a different style bulb please send us a picture, or message us your make & year and we can look up your bulb.
We are in Oklahoma City and have a 100% satisfactionguarantee. To confirm our location please see our feedback.Please note: light bulbs are a part of an electrical system in a machine. For bulbs to functionproperly components such as electrical system, stator, voltage regulator, and light bulb sockets need to be fully functional. Common malfunctions are: Loose ground wire, bare positive wire causing a short, poor contact between the bulb and light socket, and malfunctioning voltage regulator which would cause very high voltage into the wiring harness and blowing bulbs instantly.
Ships from a small business in Oklahoma, United States and we ship the same or next shipping day via USPS with free tracking. Buyer pays actual shipping cost. No overcharge. After the first set, all other sets ship at no additional cost.