When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $16.70
Product Description
-
Number of Sensors
1
-
Thread Diameter
0.708
-
Wire Quantity
4
-
Sensor Type
Heated
-
Manufacturer Warranty
3 Years
-
Manufacturer Part Number
RC060333400
-
Brand
Reach
-
Type
Oxygen Sensor
-
Interchange Part Number
15384 75-3917 ES11074 24449
Note:
1. Factory direct store! Support on behalf of the hair, welcome to consult, we 24 hours online. In addition, we have warehouses in Kentucky, Texas and California, which can automatically match the nearest warehouse address according to your receiving address to give priority to delivery, greatly reducing the logistics time (if one warehouse is out of stock, we will deliver goods to you from other warehouses)!
2. The compatibility list is for reference only, and there are some differences among different models. First, check to see if your car is on the list. Then, compare your original oxygen sensor with the display image of our product, especially it has the same pattern and shape as the plastic shell at the connector end. If you are not sure, please feel free to send us pictures so that we can confirm for you.
Features:
- Brand New Oxygen Sensor
- Quality Guaranteed Tested to Meet OE Specifications
- Better Fuel Economy
- Placement on Vehicle:(Please refer to the adapter table or the details.)
- Line length:470mm
-
Warranty: 3 YEAR
-
Returns: 30 days
- Direct Plug-In Replacement.
- Built and tested to strict quality control standards
Package Include:
1 x Oxygen Sensor as pictured
Interchange ForPart Number:234-4380 226A0ET000 226A0JA10C
Built and tested to strict quality control standards
Fit Vehicle:（Please refer to the compatibility table for details）.
MAZDA
MPV
2.5L V6 2000 2001
3.0L V6 2002 2003 2004 2005 2006
SUZUKI
FORENZA 2.0L L4 2006 2007 2008
RENO 2.0L L4 2006 2007 2008
How do I know the O2 sensor is good or not?
A: The only way to know if the O2 sensor is functioning normally is to check its responsiveness to changes in the air/fuel mixture, by Voltage Measurement or Waveform Simulation.
Use a 10-mega ohm digital voltmeter. Hook up the voltmeter's red probe to the sensor's signal wire and the black probe to engine ground. (Use back probe method, DO NOT pierce the wire.) For a good sensor, voltage should fluctuate constantly between 0.1 and 0.9 volts after starting the engine for 2 or 3 minutes.
- Goes above range between 0.1 and 0.9 volt
- Remains below 0.5 volts
- Stays fixed at a particular voltage
You're free to choose replacement or refund if our sensor fails to work, in this case.