When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $19.99
CHRYSLER REMOTE KEY FOB. SIGNAL TESTED AND PASS. .1999 - 2001 300M LHS AND CONCORD MODELS ONLY. IF UNSURE CHECK YOUR DEALER OR DO YOUR OWN RESEARCH. . PART NUMBER 04759008 FCC ID GQ43VT9T PLEASE SEE PROGRAMMING INSTRUCTIONS BELOW AND NOTE THAT YOU MAY HAVE TO TAKE TO DEALER FOR PROGRAMMING IF THE VEHICLE CURRENTLY DOES NOT HAVE A WORKING REMOTE ON HAND. SO PLEASE DO YOUR OWN RESEARCH FOR PROGRAMMING.SHIPPING IS USPS WITH TRACKING NUMBER. ANY QUESTIONS PLEASE MESSAGE ME.
ATTENTION: You MUST HAVE one working remote to add one more to the system. If you do not have one working remote right now then these instructions will not work. You will have to have a Locksmith or dealership use a computer to program the first remote for you.
1. Turn ignition to run position (as far as you can go without starting engine).
2. Using any Working remote, press the UNLOCK button for 4 to 10 seconds.
3. Within the specified 4 to 10 seconds, continue pressing the UNLOCK buton and press
the PANIC button for 1 second and release both buttons at the same time. A chime will
sound within 3 seconds to indicate that the vehicle has entered remote programming
mode.
4. Within 30 seconds of the chime, press any button on all remotes to be programmed
including previously programmed remotes. A chime will sound after each remote is
programmed.
5. Turn ignition to OFF and remove key.
6. Test all remotes.