When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $2822.40
6\" Basic System w/ Dirt Logic 2.25 Gas Charged Shocks
Fabtech\'s FJ system features extended length steering knuckles attaching to one piece lower control arm crossmembers for a full 6 inches of lift to clear 35\" tires. Front lower crossmembers feature adjustable alignment cams along with an integrated 1/4\" thick steel differential skid plate.
This system retains the front strut assembly for a smooth highway ride with ease of installation. The rear suspension system includes tubular upper and lower link arms, utilizing the stock rear coil springs for a supple highway ride with excellent offroad articulation. Installation does not require relocation of the Rack and Pinion or disassembly of the front strut assemblies. The stock front and rear driveshafts are retained due to Fabtech\'s precise suspension geometry.
Wheel/Tire Recommendations
- Use 35x12.50 R17 tires w/ 17x8 wheels w/ 4 5/8” BS w/ minor trimming
Notes
- Vehicles may require alignment after kit is installed
- Kit does not fit models with factory electronic controlled shocks
- 5 Year 60,000 Mile Powertrain Warranty
Parts Included
- Impact Strut Mount (x2)
- Impact Strut (x2)
- Hardware Kit (x3)
- Hardware Sub-Assembly Kit
- Body Mount Weld In Plate (x2)
- Tie Rod End (x2)
- Sway Bar Drop (x2)
- Bushing Kit
- Spindle (x2)
- Bump Stop (x2)
- Pop Rivet Aluminum (x2)
- Lower Differential Bracket (x2)
- Bump Stop Mount (x2)
- Differential Skid Plate
- Front Crossmember
- Rear Crossmember
- Crossmember Weld In Plate (x2)
- Coil Spacer (x2)
- Upper Link Arm (x2)
- Lower Link Arm (x2)
- Trac Bar Bracket
- Trac Bar Bracket Nut Tab
- Brake Line Bracket
- Sway Bar End Link (x2)
- Rear Bump Stop Bracket (x2)
- Sway Bar Bushing Kit
- Sway Bar Sleeve Kit
- Rear Shock Spacer (x2)
- Rear Bushing Kit
- Rear Shock Bushing (x2)
- Rear Dirt Logic 2.25 Monotube Gas Charged Shock Absorber (x2)
Dirt Logic Stainless Steel 2.25\" Monotube Gas Charged Shocks
Dirt Logic 2.25\" shocks feature urethane bushings in the mounting points to reduce road noise and rattling associated with spherical bearings. Dirt Logic coilover shocks utilize spherical bearings at each end for increased strength along with urethane misalignment cups in the top caps. The misalignment cups keep the road noise transferred through spherical bearings to a minimum.
- 2.25\" OD Stainless Steel Body
- 2.0\" OD Billet Aluminum Piston
- 7/8\" NitroSteel Black Piston Rod
- Polyurethane Mounting Ends
Fabtech Suspension Accessories
Uniball Upper Control Arms - Fabtech’s Uniball Upper Control Arms are designed for severe duty use with stock and most aftermarket suspension systems. These Arms replace the thin stock upper control arms that are prone to flex and ball joint failure with heavy duty construction designed for aggressive off-road driving. Fabtech Uniball Upper Control Arms directly replace the factory upper control arms for use on stock, aftermarket or Fabtech suspensions providing additional strength and reliability to the vehicle.Fabtech provides a 5 Year 60,000 Mile Powertrain Warranty to the original retail purchaser who owns the vehicle, on which the product was originally installed, for defects in workmanship and materials. The Warranty excludes the following Fabtech items; bushings, bump stops, ball joints, tie rod ends, limiting straps, cross shafts, heim joints. These parts are subject to wear and are not considered defective when worn. They are warranted for 60 days from the date of purchase for defects in workmanship. Take apart shocks are considered a serviceable shock with a one year warranty on leakage only. Service seal kits are available separately for future maintenance. All other shocks are covered under Fabtech\'s Limited Lifetime Warranty. Fabtech does not warrant any product for finish, alterations, modifications and/or installation contrary to Fabtech’s instructions. Alterations to the finish of the parts including but not limited to painting, powdercoating, plating and/or welding will void all warranties. Some finish damage may occur to parts during shipping which is considered normal and is not covered under warranty.
Any and/or allproduct(s)should be inspected for quality & fitment when received. It is the responsibility of the customer to check for correct part number/correctproduct(s)and or damages & test fitproduct(s)to insure correct vehicle fitment before installing product(s). DO NOT paint or modifyproduct(s)before installing as theproduct(s)CANNOT be returned after they are painted or modified. We are notliable for damage done to your vehicle and/orproduct(s)because of oversight.ABSOLUTELY NO EXCEPTIONS!!No Returns after 30 Days of Date of Purchase.Please inspect your merchandise for damage when you receive your shipment. In the event that your merchandise is damaged, notifyPCS Custom Automotiveimmediately. You MUST make a note of the damages with the freight carrier when you sign for delivery.Only items that were purchased in the last 30 days may be returned.All products must be returned in original boxes & not used.There will be a 15% restocking fee charged on all returns with a minimum restocking fee of $15.00. There will be no exceptions to the restocking fee. Return shipping is the responsibility of the customer. Refunds will be given for the product value only. The freight incurred to get this to you is not refundable. Truck freight cost is $100.00 per pallet.Restocking fees and Freight cost will be deducted from ALL exchanges.Keep in mind that shipping is not \"free\", but it is included in the final price. A freight carrier is paid to deliver this to you. Ebay adds the Free Shipping Sticker on their own and I cannot remove it. If a return is processed the freight is not refundable from the carrier, so this is a non refundable service. If you have any questions about this, please contact us.