Emergency Wind Up Scissor Jack Lift for Car Van Garage W/ Speed Handle 2 Tonne for Sale

Price: $22

This item has been shown 19120 times.

Store category

Sign Up Now ! You may also like Emergency Wind Up Scissor Jack Lift for Car Van Garage W/ Speed Handle 2 Tonne Product Description The scissor jack, with tooth gears, can extend from 90mm(close position) to 360mm, more than enough to lift most vehicles. Easy to operate using the chromed crank with speed handle.

Minimum height: about 90MM

Maximum height: approximately 360MM

Lifting: 2.0T

Color: Black

Material: Steel

Net weight: 2.1KG

Item Size: 35*8.5*8.5 (L×W×T)

Scope: Suitable for small and medium sized vehicles. Such as: cars, Buick, Santana, Vietnam and other vehicles.

Packing include:

Scissor jack * 1

Handle * 1 Attention:
1. Study, understand and follow all instructions before operating this device.
2. Do not exceed rated capacity as designated by the height/capacity curve.(Sea below)
3. Use only on hard level surface.
4. Use for emergency tire changing only.
5. Never get beneath the vehicle when it is supported by the jack.
6. Activate the hazard warning flasher,turn off ignition, set parking brake, move automatic shift selector to park position. In case of a manual transmission, move gear selector into reverse position. In addition, the wheel diagonally opposite from the wheel being lifted shall be chocked in both directions.
7. Lift only on areas of the vehicle as specified by the vehicle manufacturer.
8. Follow tire changing procedure as per the vehicle manufacturer's owner's manual.
9. No alterations shall be made to this product.
10. Failure to heed these messages may result in personal injury and/or property damage.
This device is designed to sustain the following loads at these specified heights. DO NOT EXCEED the rated capacity for each position.
Before Use:
1. Check before each use for abnormal conditions such as cracked welds, leaks, damaged, loose or missing parts.
2. Inspect the jack immediately if lift is believed to have been subjected to an abnormal load or shock.
3. If the jack is found to be damaged, it should be removed from service until properly repaired.
1. Insert the jack handle into the hole of the handle socket.
2. Make sure that the saddle is correctly positioned. To prevent damage to the jack, do not move the jack while the handle is intact in the socket.
3. To raise load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle clockwise.
4. To lower load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle counterclockwise slowly.
1. When jack is not in use, lifting arm should be in full down position.
2. Always keep jack clean and keep the screw and bearings well lubricated.
3. Store the handle with care. Payment Delivery details Terms of sales Welcome Contact us Payment 1.Please check the item after you receive it,please keep us posted if you have any confusion or porblems about your order .We will give you reply and best solution within 1 working day.
2.Please don't leave any neutral/negative response or open a case when you have problems with our product , we promise to try our best to help and not let your interest be damaged.

3.If you are satisfied with our product,please leave us a 5 stars positive response and we will do the same for you. Delivery details Sincerely thank you for choosing us, we suggest you reading our shipping terms and conditions.

1.All items are shipped within 1-2 business days after we confirm your payment and your shipping address.

2.We only ship our items to the areas that our logistics provider covers.

3.To ensure you receive item safely, please offer the concrete and complete shipping address

4.Please keep the consistency of the address from Paypal and .

5.Sometimes your order may be impacted by extreme bad weather, strikes or other unexpected events.

6.If there are any problems with your order, including late delivery or being lost, please do not hesitate to contact us. We are happy to offer solutions to your inquiries. Terms of sales 1.We accept PayPal only!

2.Please keep the consistency of the address from Paypal and .

3.Payment must be received within 3 days since you won the item, or will launch Unpaid Reminder Against you. Welcome
Contact us

If you have any question,Please no hesitation to contact us via message, we will reply you within 24 working hours.

    Parts Search: