Price: $470

This item has been shown 85547 times.


  • Universal Fit.


  • This turbo kit is NOT COMPLETE turbo kit.This kit is for customers custom make or DIY project. Customers also need to custom make the turbo manifold and downpipe for this kit.
  • This turbo kit can gain 80-150 HP if it sets at 7-15 PSI.We offer 6 MONTHS warranty for this turbo charger!

Package Includes:

Turbo Charger:

  • Brand new T3/T4 T04E .57AR turbo charger.Max up to 350HP.
  • Inlet: 3.0 Inch. Outlet: 2.0 Inch.
  • Turbine Flange: T3 Flange. Downpipe Flange: 2.5'' 5 Bolts Flange.
  • Type of Bearing: Journal Bearings.
  • Cooling Type: Oil Cooled Only.
  • Oil Inlet: 1/8 NPT.
  • Exhaust Trim: .57AR.Turbine Wheel Diameter: 54.06MM/65.20MM.
  • Compressor Trim: .50AR.Compressor Wheel Diameter: 50.16MM/76.84MM.

27''X7.0''X2.5'' Front Mount Intercooler:

  • Brand new universal 27''x7''x2.5'' front mount intercooler. Made of high quality T6061 aluminum.
  • Tube and fin design.High flow and light weight.Support up to 400HP and 35PSI.
  • Compress air flow rate: 700cubic feet/min.
  • Pressure drop: 0.2-0.5 at 15PSI, 2-5 at 35PSI.
  • Full size: 27''x 7''x 2.5''.Inlet/Outlet: 2.5''
  • Core size: 21''x 7''x 2.5''.

Universal 2.5'' PipingKit:

  • Brand new universal 2.5'' polished aluminum piping kit. Made of high quality T6061 aluminum.
  • This is great for turbo DIY project.Customer need to cut and bent the pipe to fit your car.
  • 2.5'' inlet diameter,increase more airflow.It come with hight quality 4PLY silicone couplers and strong and tighter t-bolt clamp.it can support up to 400HP.

38MM Turbo Wastegate:

  • Brand new universal 38mm wastegate,made of hight quality stainless steel hardware,mating weld flanges are 304L.
  • Set at 7 PSI,comes with two extra 11PSI and 15PSI springs,fully adjustable.
  • Only 4.35'' tall(good for customer working with tight engine compartment.
  • Dual port.Accurate boost pressure,Ultra durable diagram.

Turbo Blow off Valve Bov:

  • Brand new turbo blow off valve bov. Made of high quality CNC billet aluminum and andized finished.Including O-ring,hardware and flange.
  • Our blow off valves is a dual stage pull-type relief valve. Unlike typical push type blow-off valves,will not leak under any level of boost.
  • It is for maximum performance, incorporates both a small primary valve for ultra quick activation, and a larger secondary valve for additional discharge capacity. It is constructed of billet aluminum, which ensures long-term durability and a high luster look.

Oil Return Line:

  • Brand new 10AN oil drain/return line kit,made of hight quality stainless steel braided line and T6061 aluminum fitting.
  • Length: 17''. ID: 0.5''.
  • Helps circulate oil from the turbo to the oil pan.

Oil Feed Line:

  • Brand new oil feed line,made of hight quality stainless steel braided line.Special designed inlet adapter limits oil flow,effectively prevent blown oil seal caused by excessive oil pressure.
  • Length: 36''. ID: 3/8''.
  • Comes with one 1/8 NPT male fitting and one 4AN male fitting.Has restriction build in,offers proper oil feeding to the turbo charger.

Turbo Boost Controller:

  • Brand new turbo boost controller. Made of high quality CNC machined T6061 aluminum with anodized finish.Comes with hardwares for easy installing.
  • Light weight design.Allow you to adjust PSI ratings(1-30PSI)without changing the wastegate springs as well as replacing the wastegate springs.

Turbo 4 Bolt Flange:

  • 100% brand new, Never been tried or installed.
  • Made of High Quality T-304 Mild Steel Durable Material
  • 4-Bolt Rectangular Shape
  • 0.50” Thickness Flange
  • Fits T3 2.50" X 2.00" Turbo/ Turbocharger Flange
  • No instructions included, Professional installation is highly recommended
  • Item exactly the same as picture shown.
  • Instruction is NOT included.Professional installation is highly recommended.

  • Please check out my store for other parts.

Parts Search: