Stepped Race FMIC W Fits 07-12 135i/335i N54 N55 E90 E92 E82 for Sale


When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Price: $300.97

  • Product Description
  • Stepped Race FMIC W 2007-12 135i/335i N54 N55 E90 E92 E82
  • This listing is for vehicles that require the lower charge pipe add on. It is REQUIRED for 2009+ Vehicles. If you have a 2007-2008 135i or 335i you can still utilize this lower charge pipe upgrade but it is not required.
  • Stepped Race FMIC W Fits 07-12 135i/335i N54 N55 E90 E92 E82

    Product Description

    Stepped Race FMIC W 2007-12 135i/335i N54 N55 E90 E92 E82

    This listing is for vehicles that require the lower charge pipe add on. It is REQUIRED for 2009+ Vehicles. If you have a 2007-2008 135i or 335i you can still utilize this lower charge pipe upgrade but it is not required.

    Replace your overheated factory intercooler with the race intercooler kit to get the most out of your N54/N55. We designed this kit to be one of the best performing, direct bolt on intercoolers available for your BMW with special attention to quality and performance while maintaining a reasonable price point. Our intercoolers allow for higher HP gains, mainly due to their ability to keep intake temps down while preventing heat soak which is a common problem with the factory intercooler. This results in a more power and increased reliability with reduced chances of pre-detonation & knock.

    Intercooler Core

    The most important component of any intercooler is the core. The core cools the charged air from the turbo before it enters the engine and the OEM BMW tube and fin intercooler is designed to support low boost levels and air flow. Once boost levels and air flow are increased, the OEM unit is easily overwhelmed and can not keep up with the cooling demands of a tune running more than OEM boost levels. This results in heatsoak which will result in a power loss and a higher potential for pre-detonation in the upper RPM range.

    We remedy this problem with our ultra high density 1000hp custom bar and plate core design which utilizes a staggered and offset internal and external fin pack. Our core has been carefully tuned to provide the the best intake temperature reduction while maintaining minimal pressure drop. Our bar & plate core is also much more durable than the OEM tube and fin core, with a better ability to withstand rocks and other debris. This intercooler was specifically designed for upgraded turbo cars running larger twin turbos or single turbos. This custom core is 1080 cubic inches in total and is 134% larger than the stock intercooler.

    • 100% brand new, never been tried of installed.
    • Ultra High Desnity Bar & Plate Core
    • 134% Larger Than OEM FMIC
    • Cast Aluminum End Tanks
    • Easy install, less than 2.5 hours
    • Professional installation recommended.
    • No instruction included.

    Fitment:

    • 2008-2011 E82 BMW 135i
    • 2007-2011 E90/E91/E92/E93 BMW 335i/xi
    • 2011-2012 E92 BMW 335is

    Package including:

    • 1X FMIC Intercooler
    • As Pictures Show

    Payment
    • We accept eBay payment and other payments through eBay payment

    Shipping

    • Items will be shipped within 1 business days after your payment is cleared.
    • All Customer's items will be shipped from our CA or NJ warehourse
    • Import duties, taxes and charges are not included in the item price or shipping charges
    • International orders may take 1~3 weeks to arrive

    Returns

    • You can return yourunused items back for exchange or refund within 60 days.
    • Please contact us for return process before you return the item.

    Customer service

    • Please feel free to contact us by ebay message if you have any questions, our customer service will reply within one business day.

    Our StoreMain ProductsPromotion Items Shop CategoryStore Home Exhaust Systems◈Exhaust Manifolds & Headers◈Exhaust Pipes & Tips◈Exhaust Tips◈Mufflers◈V Clamps◈Turbo Chargers & Parts◈Exhaust Wraps◈Exhaust cutout Intake Systems◈EGR Valves & Parts◈Air Intake Systems◈Cylinder Heads & Parts Timing Components◈Timing Chain Kit◈Timing Belt Water Pump Kit◈Control Solenoid Valve Suspension & Steering◈Shocks & Struts◈Coil Springs◈Lift Kits & Parts Chassis Parts◈Control Arms & Parts◈Control Arms & Parts-OEM◈Control Arms◈Sway Bars◈Caster/Camber Kits Engines & Components◈Motor Mounts Cooling Systems◈Fans & Kits◈Radiators & Parts◈Intercooler Piping Kit Exterior◈Grilles◈Hoods Brakes & Brake Parts◈Air Dryers Interior◈Locks & Hardware Automotive Repair Kits◈Other Automotive Tools & Suppl◈Diagnostic Service Tools Other Parts◈Go Kart Parts◈Connectors & Terminals Lighting & Lamps◈Xenon Lights Gaskets◈Cyl. Head & Valve Cover Gasket Hangers, Clamps & Flanges◈T Clamps◈Narrow Clamps◈Step Clamps Transmission & Drivetrain◈Universal Joints & Driveshafts Air Intake & Fuel Delivery◈Fuel Inject. Controls & Parts Turbos, Nitrous, Superchargers◈Turbo Chargers & Parts◈Turbo Chargers Rebuild Kit Fuel oil line & fitting◈Fuel oil line◈Fuel oil fitting OtherHot Item Forged/Front 1-3\" Leveling Kit W/ Shock Extender Fits GMC Chevy 2500 3500 99-13 USD 29.99 Universal 3\" Inch Stainless Steel V-Band Turbo Downpipe Exhaust Clamp Vband 76mm USD 18.46 2\" Front Leveling lift kit Fit Chevy Silverado GMC Sierra GM 1500 LM 07-17 Black USD 16.99 2.5\'\' Inch Stainless Steel V-Band Flange & Clamp Kit for Turbo Exhaust Downpipes USD 14.29 1PC 2.75\" (2.99\"-3.31\") 301 Stainless Steel T Bolt Clamps Clamp 77mm-85mm USD 3.46 Picture

    New List Item 3\" Front Leveling Lift Kit 95-04 For Toyota Tacoma 4Runner 4WD BLACKHORSE-RACING USD 32.29 3\" FRONT LEVELING LIFT KIT FOR DODGE RAM 1500 4WD 2006-2018 BLACK USD 36.09 For 2013-2015 Chevy Malibu LT LTZ Projector Headlight Headlamp Left Driver Side USD 116.58 Timing Chain Kit+Cover Gaskets 04-08 For Ford F-150 F250 Lincoln 5.4L Triton 3V USD 58.99 2PCS 2.5\" Vband 90 Degree Elbow Adapter Flange Cast For T3 Turbo USD 69.66 Stepped Race FMIC W Fits 07-12 135i/335i N54 N55 E90 E92 E82

    Product Description

    Stepped Race FMIC W 2007-12 135i/335i N54 N55 E90 E92 E82

    This listing is for vehicles that require the lower charge pipe add on. It is REQUIRED for 2009+ Vehicles. If you have a 2007-2008 135i or 335i you can still utilize this lower charge pipe upgrade but it is not required.

    Replace your overheated factory intercooler with the race intercooler kit to get the most out of your N54/N55. We designed this kit to be one of the best performing, direct bolt on intercoolers available for your BMW with special attention to quality and performance while maintaining a reasonable price point. Our intercoolers allow for higher HP gains, mainly due to their ability to keep intake temps down while preventing heat soak which is a common problem with the factory intercooler. This results in a more power and increased reliability with reduced chances of pre-detonation & knock.

    Intercooler Core

    The most important component of any intercooler is the core. The core cools the charged air from the turbo before it enters the engine and the OEM BMW tube and fin intercooler is designed to support low boost levels and air flow. Once boost levels and air flow are increased, the OEM unit is easily overwhelmed and can not keep up with the cooling demands of a tune running more than OEM boost levels. This results in heatsoak which will result in a power loss and a higher potential for pre-detonation in the upper RPM range.

    We remedy this problem with our ultra high density 1000hp custom bar and plate core design which utilizes a staggered and offset internal and external fin pack. Our core has been carefully tuned to provide the the best intake temperature reduction while maintaining minimal pressure drop. Our bar & plate core is also much more durable than the OEM tube and fin core, with a better ability to withstand rocks and other debris. This intercooler was specifically designed for upgraded turbo cars running larger twin turbos or single turbos. This custom core is 1080 cubic inches in total and is 134% larger than the stock intercooler.

    • 100% brand new, never been tried of installed.
    • Ultra High Desnity Bar & Plate Core
    • 134% Larger Than OEM FMIC
    • Cast Aluminum End Tanks
    • Easy install, less than 2.5 hours
    • Professional installation recommended.
    • No instruction included.

    Fitment:

    • 2008-2011 E82 BMW 135i
    • 2007-2011 E90/E91/E92/E93 BMW 335i/xi
    • 2011-2012 E92 BMW 335is

    Package including:

    • 1X FMIC Intercooler
    • As Pictures Show

    Payment
    • We accept eBay payment and other payments through eBay payment

    Shipping

    • Items will be shipped within 1 business days after your payment is cleared.
    • All Customer's items will be shipped from our CA or NJ warehourse
    • Import duties, taxes and charges are not included in the item price or shipping charges
    • International orders may take 1~3 weeks to arrive

    Returns

    • You can return yourunused items back for exchange or refund within 60 days.
    • Please contact us for return process before you return the item.

    Customer service

    • Please feel free to contact us by ebay message if you have any questions, our customer service will reply within one business day.



    Parts Search:


    Follow