For 03-06 Chevy Silverado Avalanche Black Housing Clear Headlight Bumper Lamps for Sale

Price: $79.99

For 03-06 Chevy Silverado Avalanche Black Housing Clear Headlight Bumper Lamps

Item Description:


APPLICATION:

2003-2006 Chevy Silverado 1500/2500/3500/1500 HD/2500 HD Pickup


2007 Chevy Silverado 1500/1500 HD/2500 HD/3500 Classic Body Pickup Only


2003-2006 Chevy Avalanche 1500/2500 Pickup (Without Body Cladding)


PART NUMBER: 1221-0170S
HOLLANDER: 114-00877AR, 114-00877BR, 114-008788BL
OEM: 10366037, 10366038, 10396912
PARTSLINK: GM2502224, GM2502257, GM2503224



FEATURE:

Manufacturer Part Number: OEM#A7703A0A6202A


Interchage Part Number: 10366038/10366037, 15199557/15199556


Other Part Number: GM2502224/GM2503224,GM2801161/GM2800161,GM2521185//GM2520185


Bulb Type: 9006 Low Beam / 9005 High Beam


Headlight: Re-use Factory Bulbs for High Beam & Low Beam


Bumper Light: Re-use Factory Bulbs for Parking & Turn Signal


Material: Black Housing with Clear Polycarbonate Lens

PACKAGE INCLUDES:

1 Pair LH (Driver Side) + RH (Passenger Side) Headlights



INSTALLATION GUIDE:

Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than3.5 feet above the ground.


1. Find the adjustment screws. Firstly, locate the adjustment screws on your vehicle.


2. Adjust the headlights individually. The headlights should be adjusted one at a time. Put a rag or towel over a chair infront of the light you want to block. Covering the light assembly directly can damage the plastic lens.


3. Adjust the vertical field. The screw on the top of the light housing should be turned clockwise to raise the lights andcounterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the lightbeam shines directly on or just below the center of the tape line on the wall.


4. Adjust the horizontal field. The screw on the side of the light housing should be turned to get the right/left adjustmentcorrect. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.


5. Test your results.

More Display:



Parts Search:


Follow