FIAT GRANDE PUNTO Wheel Spacers 4x100 Hubcentric 20mm Wide 56.6CB inc 8 Bolts UK for Sale


When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Price: $69.58



Welcome to our page

1 Pair of GRAND PUNTO 2005-2009 4 x 100Wheel Spacers with 8 x Extended M12 x 1.5 HT wheel bolts

Tapered Bolts will be sent with thesespacers


***PLEASE NOTE THAT THESE 20mm WHEEL SPACERS ARE NOT SUITABLE FOR REAR DISC BRAKE GRANDE PUNTO***

Spacers are 20mm wide giving 40mm overall increase acrossthe axle. These spacers are designed to fit a 56.6mm HUB and wheel bore.

  • All our custom-made spacers are manufactured from 6082 T6 Solid billet Aluminium and machined by our skilled Engineers at our Barnsley HQ


One ofthe most cost-effective mods on the market and easy to fit in 7 steps

  • Simply unbolt your wheel and remove.
  • Wire brush and wipe the bore and wheel hub clean, (must be dirt/rust free)
  • Apply a little copper grease or similar to stop the faces sticking together.
  • Slide the spacer on to your existing hub.
  • Check the spacer is sitting flush against the original hub with no visible gap
  • Gently position the wheel on to the spacer spigot taking care not to damage the machined surfaces.
  • Secure the wheel with the extended bolts and torque them to the required spec.

WatfieldsPrecision Engineering also manufacture custom parts as well as wheel spacersand adapters.

All of our wheel spacers aremanufactured from material sourced in the UK and are produced by WatfieldsPrecision Engineering UK LTD. Visit www.watfields.com

Pleasecontact us to discuss any enquiries you may have


Parts Search:


Follow