PART 1 of 3 How To Install Replace Lower Intake Manifold Gaskets GM 3.4L V6
If you are losing Coolant but don't know where it is going check to see if
your oil looks lighter brown and foamy if so you are getting coolant or
antifreeze in your oil and this can be one of the causes. This video is
applicable to the Pontiac Grand Am, model years 1999-2005.
Injen True Cold Air Intake Install - 2014 Civic Si
For more information and/or to purchase this Injen True Cold Air Intake,
follow this link:
We install the new version of the Injen Cold Air Intake for the 2012+ Civic
Si and 2013+ Acura ILX. This "True Cold Air" version gives better overall
performance than the original Injen Cold Air Intake. Sit back and relax
while we do all the hard work!
Benefits of the Injen True Cold Air Intake over the first generation cold
* Reaches further down to bring colder air in to your engine.
* Relocates battery with included hardware to minimize the intake bends.
This results in the highest flow possible.
* Colder air and less intake restriction means more power!
* Includes all installation hardware needed.
2012+ Honda Civic Si models (coupe and sedan).
2013+ Acura ILX 6 speed manual models. See our sister site,
http://www.proimporttuners.com, to purchase this intake for your Acura ILX.
Polished (featured in this video)
Summary of Important Steps of the Injen True Cold Air Intake Install:
1. Uninstall upper portion of factory intake system
2. Remove factory "CCV" tube and use Injen hardware to join factory coolant
3. Remove battery and tray
4. Remove misc tubes and items
5. Remove final (lower) pieces of factory intake system
(http://www.youtube.com/watch?v=zeGQm-rYvPk&t=730). The front bumper needs
to be removed first (see our separate video for how to do this).
6. Install Injen battery tray / bracket and factory battery
7. Put on throttle body coupler for the Injen True Cold Air Intake system
(http://www.youtube.com/watch?v=zeGQm-rYvPk&t=1342). Also install the MAF
sensor on the upper intake tube.
8. Install Injen Vibra-Mount
(http://www.youtube.com/watch?v=zeGQm-rYvPk&t=1400). Please note the 2014
Civic Si requires a small amount of drilling, unlike previous years.
9. Install lower silicone portion of Injen True Cold Air Intake system
10. Install upper pipe of Injen intake
11. Put on lower most curved aluminum pipe section for the Injen intake
(http://www.youtube.com/watch?v=zeGQm-rYvPk&t=1660). Also install the Injen
filter and tighten down all other clamps on intake, making sure there is
enough clearance everywhere.
12. Finish connecting misc. items, such as battery and MAF sensor
13. Go out and take a drive and experience the POWER of the Injen True Cold
Air Intake! :)
IMPORTANT SAFETY DISCLAIMER: When working on your car, always follow proper
safety procedures. This includes, but is not limited to, letting your car
cool down, using the correct tools and protection, jacking/lifting your car
correctly, and in general being careful about what you are doing. If you do
not feel confident doing something, do not attempt it! Instead, have
someone else with more experience try or hire a professional. PRO Civic
cannot be held responsible for any incidental or direct damages, injuries,
or additional costs caused by installing any of the parts featured in our
AEM Brute Force HD as seen on Truck U on SPEED
In Episode 401 of Truck U, Matt Steele and Bruno Massel take a look at the
AEM Brute Force HD Air Induction System for diesel applications. Watch the
video and see how Matt and Bruno are extremely impressed with the quality
and performance that the Brute Force HD air intake system provides for
Visit AEMpower.com for more information
2010 F-150 Gott's Mod Air Intake Modification
**EDIT** WATCH MY OTHER VIDEO FOR THE PROBLEM WITH THIS MODIFICATION!
I take no credit for this modification. Just a quick tutorial on how to
modify your stock air intake box to allow more air to flow through your
2009-2010 Ford F-150.
Any questions leave in the comment section below. Thanks!
Ford 5.4L 2v Engine Intake Gaskets P0171 P0174
In this video I show in detail how to change the intake gaskets on a 5.4L
2v for the all too common vacuum leak concerns. This will likely set codes
P0171 P0174 for a lean condition which may only be present on a cold
Intake Torque Spec- 18in lb then tighten to 18ft lb in sequence.
Intake Torque Sequence-
Clearing DTC's and learned fuel trims-
AEM Cold Air Intake- Whats in the Box?
Today on Whats in the Box we are featuring the
AEM Cold Air Intake. Check our Website for Fitment. We hope you have
enjoyed this segment of "Whats in the Box"
How To - Cold Air Intake
In this video I'll show you how to build and install a cold air intake for
your vehicle. This is a DIY project that only took about $30 total to
accomplish including the $25 cone filter.
Need To buy Parts? Get them cheaper Here:
Offroad Parks: http://bleepinjeep.com/offroad-parks
Tee Store: http://bleepinjeep.com/store
Coupon Codes: http://bleepinjeep.com/discounts
*Disclaimer - This product is meant for entertainment purposes only. Your
mileage may vary. Do not try this at home. Void where prohibited. Some
assembly required. For off-road use only. Slippery when wet. Batteries
not included. Do not use while operating a motor vehicle, heavy
equipment, cherokee, wrangler, or any jeep vehicle. May be too intense for
some viewers and children under 30 years of age. Please remain seated
until the ride has come to a complete stop. Studies have shown viewing
these videos causes increased cancer risks in laboratory test people. I am
not a professional, I have no training, I'm not even particularly good at
horse whispering. Don't believe everything that you know. Please keep
your hands in the vehicle at all times. Do not tap on glass. Do not eat
anything that has been on the floor for more than 3 days. Keep your hands
to yourself. Not to be taken internally. Reproduction strictly
prohibited. Driver does not carry cash. Objects in jeep mirrors may be
farther than they appear.*