Mazda RX3 - Shannons Club TV - Episode 10
Shannons Club TV hosted by Mark Oastler & Joe Kenwright talk about
Australia's rich motoring history on the road and in competition. Episode
10 features the Mazda RX3.
Get connect now and share your passion
Join the Shannons Club http://www.shannons.com.au/club
Part 12: 13B Rotary Engine Rebuild - My 76 Mazda RX-5 Cosmo Restoration
Just as I promised last episode, it is finally time to build the engine!
Part 12 of my RX-5 Cosmo restoration covers the entire process of building
the 6 port 13B Mazda rotary engine. While this engine is a hybrid of GSL-SE
RX-7 and Cosmo parts, the process is the same for any rotary from a 12A to
a 13B NA, 13B turbo, 13B-REW or any
other variant of the 13B. This video shows the whole process of the engine
build, starting from measuring the rotors and covering everything else
including clearancing the side seals, assembling the rotors, complete
assembly the short block, setting the eccentric shaft end play and
installing the front cover and everything underneath it. It's probably the
most complete engine build video outside of what you can buy from the
vendors, and as such, is an hour long. After this one, I'm going back to
videos under 20 minutes. But for now, grab a beverage of your choice, sit
back, and enjoy.
Mazda RX-3 13B Historic racecar - race 6 2013
Driver: Gust Van Haelst (B)
Race series: Belgian Historic Cup http://www.bravoracing.be/
Event: Menzo 24h of Circuit Zolder
Date: 31th of august 2013
race 1 result: finished 2nd in class and 9th overall from 46 entries.
race 2 result: finished 3rd in class and 10th overall from 42 entries.
More rotary action in this playlist on my channel.
Filmed with 2 different camera's:
Canon Legria HF M46
Canon EOS 7D + Røde Videomic Pro
Like my Facebook page
1974 Mazda RX-3 /Walter Mitty
This was a practice session at Road Atlanta 2013 / Walter Mitty/HSR.
I'am driving Gordon Zadie"s 1974 RX-3 Tube chassis GT-3 road race car.
12a bridge port with 40 mm chokes in the carb.
Car weight 2030 with driver.
20B ROTARY ACTION! 20B DATSUN 1200 & 20B MAZDA RX3 - TNT 28/12/2013
On the final Test and tune at Willowbank Raceway for the year, Brad Mcilroy
was out testing his Mazfix prepped 20b Datsun 1200 ute as well as Russ in
his 20B powered Mazda Rx3. The PRODAT was testing some changes in the rear
end, keeping the newly added 10.5 inch tyres as well as some changes to the
4 link, and after a few tweaks had the car complete a full pass of 7.95 @
165 mph with a small back off down the deep end, a little slower then what
the car has run but a little more stable down the track. The Mazda Rx3 had
some issues most of the night but managed to get it down the track for an 8
second pass, also off its best, but once sorted should be back down to
where it was running before.
Mazda RX3 tags the wall - MRHELI
King of the 2-step, Frank 'Mr Heli' Canistra hasn't raced the RX3 in some 2
years. The 13B rotary turbo powered
Mazda sedan ran strong all day going into the low 8s but got loose late in
the night. Frank did a great job of steering out of what could have been a
heavier hit and the good news is that he walked away unhurt.
APSA Pro Street Shootout round 3, Sydney Dragway, Australia - May 18th
2hp: Mazda 6 VS Honda Accord
Today we'll compare Mazda6 and Honda Accord. Mazda has
become more attractive, masculine and aggressive, at the same time Accord
has grown up and has become more heavy and ambitious.
2015 Mazda CX-5 AWD Muddy Off-Road Review on Everyman Driver
http://www.everymandriver.com/ - 2015 @Mazda CX-5 AWD Muddy Off-Road Review
on @EverymanDriver with @IMDaveErickson
2014 New Car Buyer's Guide: Top 10 Sedans and SUVs Reviewed: Buy it here:
Rudy Project Sunglasses 25% Off at this link: http://bit.ly/rudy-emd
Enter the code 'EMD' during checkout at http://www.xx2i.com/ to receive a
Everyman Driver Monthly Newsletter - http://eepurl.com/Pv651
Subscribe now to receive new Everyman Driver videos in your feed:
Listen Weekly to the Everyman Driver Podcast on iTunes:
Listen Weekly to the Everyman Driver Podcast on Stitcher:
Like Everyman Driver on Facebook:
Follow Everyman Driver on Twitter:
Dave Erickson is a Multi-Media Producer, Freelance Reporter, Videographer,
Podcaster and Host. Before Everyman Driver, Dave spent 15 years working as
a TV News Anchor and Reporter.
Mazda 323 13B turbo dyno - Promaz Automotive
Don't let it's subtle looks fool you, Andrew's Mazda 323 is all go. On the
rollers at Promaz Automotive the small 323 is powered by a race 13B bridge
port rotary engine and Boosted by a
Garrett GTX42R turbocharger. [
RX3 crash - The Godfather
Sam Sadek was very lucky to walk away from this big accident at close to
200mph. The PAC Performance Godfather Mazda RX3 is powered by a 20B turbo rotary engine.
APSA Pro Street Shootout, Sydney Dragway - May 18th 2013.
SCREAMING 20B rotary engine dyno ~ JPC
Centreline Suspension's 20B PP rotary engine from their Mazda RX-7 Sports
Sedan circuit racer on the Dyno at JPC.
Mazda Rotary Dyno Massive 1664HP
This engine has massive HP, WOW Awsome also on braptv.com Mazda Rotary
Queen Street Racing 4rotor GT60 1664HP
20B rotary RX-7 Spirit R: The Ultimate Street Mazda
Built by Promaz Automotive, we think it's hard to go past Steve's wicked
Series 8 FD RX-7 if rotaries are your game. Limited to around 1500 unit's,
the Spirit R was the last of the RX-7's and featured a lot of upgraded
factory parts as well as a low 1100kg weight.
Now powered by a lethal Promaz triple rotor 20B extend port rotary engine,
power is aided by a Garrett GT42R turbo
and MicroTech fuel system and transmitted through an Albins 5-speed gearbox
and KAAZ rear end [ http://www.promaz.com.au ].