Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

Duramax Diesel Grand National CLONE

This is actually an Oldsmobile chasis that was converted into a Grand National looking Buick. This car is powered by a 6.6 litre Duramax Diesel engine. This car is sick, I do not own it unfortunately...


 


More Videos...


1200 HP Grand National burnout, Cars Fishtailing & Accelerating
DtRockstar1 records a series of cars accelerating away very loudly. You'll see a 1,200 horsepower Buick Grand National doing a burnout, two Cadillac CTS-V cars, Corvettes, and a Porsche accelerating and fishtailing. Facebook - http://tinyurl.com/6385qw2 Blog - http://dtrockstar1.blogspot.co​m/ Twitter: https://twitter.com/#!/DtRockstar1 Razzi: http://razzi.me/DtRockstar1/photos





Duramax no turbo, turbo hose removed
Duramax no turbo, turbo hose removed, 45% inyectors, edge juice tage 5, PPE Hot+2 stage 10. I didnt remove the turbo , i just removed the pipe that connects the Intercooler to the intake manifold.





Cummins S10 vs. Duramax Camaro
Brandon's Cummins S10 drag racing at Scheid Diesel's eXtravaganza 2009. Round #2 rematch put me up against the same first gen Duramax powered Camaro Z28. I turned the Nitrous on for this pass and hurt traction even more.





Ford Diesel Police Car
4BT diesel engine installed in a police interceptor





69 Cummins Camaro 4bt drag
A run down the 1/8 mile local track needs better brakes pulls right threw them





1987 Buick Regal T-Type/Grand National Burn out
Buick Regal T-Type burn out on side road. If you like videos with cars and trucks jumppin mudding smashing burnout or just burning.SUBSCRIBE TO MY CHANNEL.





Youtube's Best Redneck Vids
Insanity with car's trucks, vans and SUV's , these videos are the best of the best... this is a sequel to the best redneck insanity on youtube





69 Chevy Camaro Cummins 4bt
Maiden voyage owner and builder Jerry Frey





What does 1000HP look like?
Don't forget to subscribe to this channel. Like us on facebook: http://www.facebook.com/pages/Longhorn-Fab-Shop/148556975177038 Check out our website of all Duramax parts: http://www.longhornfabshop.com/ 1000 HP diesel truck on the Dyno and then laying rubber. I'd hate to see the EGTs on this one! I'd like to clear up any confusion, this truck was built by Bean's Diesel and was shown off at an event were also competing at.





Awesome V12 Monster diesel engine Awake and Alive startup
Awesome V12 Monster diesel engine Awake and Alive startup The first V-type engine (a 2-cylinder vee twin) was built in 1889 by Daimler, to a design by Wilhelm Maybach. By 1903 V8 engines were being produced for motor boat racing by the Société Antoinette to designs by Léon Levavasseur, building on experience gained with in-line four-cylinder engines. In 1904, the Putney Motor Works completed a new V12 marine racing engine -- the first V12 engine produced for any purpose.[2] Known as the 'Craig-Dörwald' engine after Putney's founding partners, the engine mounted pairs of L-head cylinders at a 90 degree included angle on an aluminium crankcase, using the same cylinder pairs that powered the company's standard 2-cylinder car. A single camshaft mounted in the central vee operated the valves directly. As in many marine engines, the camshaft could be slid longitudinally to engage a second set of cams, giving valve timing that reversed the engine's rotation to achieve astern propulsion. "Starting is by pumping a charge into each cylinder and switching on the trembler coils. A sliding camshaft gave direct reversing. The camshaft has fluted webs and main bearings in graduated thickness from the largest at the flywheel end."[3] Displacing 1,119.9 cuin (18,352 cc) (bore and stroke of 4.875" x 5" (123.8 x 127 mm)), the engine weighed 950 pounds (430 kg) and developed 150 bhp (110 kW). Little is known of the engine's achievements in the 40-foot hull for which it was intended, while a scheme to use the engine to power heavy freight vehicles never came to fruition.[2] One V12 Dörwald marine engine was found still running in a Hong Kong junk in the late-1960s. Two more V12s appeared in the 1909-10 motor boat racing season. The Lamb Boat & Engine Company of Clinton, Iowa built a 1,558.6 cuin (25,541 cc (5.25" x 6" (133.4 x 152.4 mm)) engine for the company's 32-foot Lamb IV. It weighed in at 2,114 pounds (959 kg). No weight is known for the massive 3,463.6 cuin (56,758 cc) (7" x 7.5" (177.8 x 190.5 mm)) F-head engine built by the Orleans Motor Company. Output is quoted as "nearly 400 bhp (300 kW)". By 1914, when Panhard built two 2,356.2 cuin (38,611 cc) (5" x 10" (127 x 254 mm)) engines with four-valve cylinder heads the V12 was well established in motor boat racing.[2] In automobiles, V12 engines have not been common due to their complexity and cost. They are used almost exclusively in expensive sports and luxury cars because of their power, smoother operation and distinctive sound. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ ▬▬ ★ MORE INTERESTING VIDEOS: http://www.youtube.com/watch?v=yrbwGmtZ8pM&list=UUYH8swcp71EHt-88lkaMDTQ ★ SUBSCRIBE: http://goo.gl/GynuUU ★ Follow my Twitter: https://twitter.com/GeorgeDominik1 ★ Thanks For Watching ★ ★ Post comment , share and tell us what u think ★ ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ ▬▬





1966 Chevy Nova Wagon-Duramax Diesel with twin turbos
Walk around video of the 1966 Chevy Nova Wagon, it has a twin turbo, Duramax diesel engine, 4l80e, air ride, all custom suspension, 9 in rear, it is Aztec Bronze, paint is all original. Watch for the upcoming feature in Car Craft magazine.





Triple Turbo Powerstroke!
This 6 liter Powerstroke from Elite Diesel had a very nice and well done triple turbo (compound) setup. Seen at the 2011 NHRDA Show at Wittmann, AZ., on 3-12-11.





632 big block 1957 chevy
632 big block from shafiroff. art morrison chassis. billet specialties 18's and 20's Full build video: THE NEIGHBORHOOD MENACE http://www.youtube.com/watch?v=rV1F-K3ZIEM&feature=plcp http://www.youtube.com/watch?v=NKM3L9GBrDE&feature=plcp Taking the 57 for a drive





Car slams on the brakes in front of truck driver
Car slams on the brakes in front of truck driver. Cameras by www.dieselboss.com





MARS 5HP DIESEL ENGINE - 1st Start Up in 50 Years!
Watch as an early 1940's MARS Diesel engine is fired up after 50 years. Originally acquired from a cane farmer in Nambour, Queensland, Australia in the 1970's, this engine sat in careful custody with another three owners before finally retiring with me. MARS engines were made by the MARS Machine Tool Manufacturing Company in Brisbane, Australia and were preceded by the horizontal and vertical Rapson and Dutton engine, made by the same company under the Rapson and Dutton company name. MARS engines are not Lister clones. Mars engines are bigger, heavier and more robust than Lister engines. When you listen to a Lister and then to a MARS you will agree. This engine has a 3 " diameter crankshaft and not one component is interchangeable with a Lister. MARS engines were commonly used in industrial situations such as factories to power line shafts which powered a number of machines, a task Lister engines had some trouble with apparently with their crankshafts twisting under the load on start up, and why this company made the Mars Diesel. 5 HP MARS engines were painted Maroon colour as standard from the factory although there are variations of colour in existence. 8 HP engines were a different colour. This engine has not run since the original owner sold it in the early 1970's. Apparently it had not run for some years before that. The second owner sadly passed away before restoring it and it sat in a shed untouched with the third owner. Close friend and temporary fourth owner, Simon Devere, assisted actively in the mechanical restoration when I purchased it and assisted in the first start after its mechanical restoration. This man is a genius when it comes to diesel engines and he has the nickname "The Lister Whisperer" for good reason. Thanks "Slippery". This engine appears to have not done much work judging by its internals. Work to the engine includes new rings, liner/cylinder hone (the original factory liner had indiscernible wear in it), new valve guides made to original specs, new valves to original specs (original was bent and caused damage to the guide) , new big end Babbit bearing, new conrod bush, very light head machine to ensure true flatness, new internal oil pipes, new head gasket, new oil gaskets, new high pressure line, new welch plugs in the head and new oil pickup. There are still remnants of the original factory maroon paint on it that have survived the years of weathering out in the cane fields. Cosmetic restoration is planned shortly to bring it back to its original livery. It will be mated with a steel transporter to emphasise its industrial heritage and will be rallied with pride. Video of the finished engine on transporter will be posted when it is done. Enjoy and please share if you like. This is the only video of a Mars engine running to this date anywhere. Hope to see more. Cheers Phil




Which car is faster? Which Car is Faster?





Similar 1/4 mile timeslips to browse:

1999 Yamaha Snowmobile Turbo: 8.615 @ 155.260
NA,


1997 Mitsubishi L300 LS1 VAN: 10.114 @ 130.490
con pakos, Engine: LS1 408ci Gonzalez Race Engines, Supercharger: - Turbos: - Tires: m/t 29.5x9.0


2003 Yamaha Snowmobile RX1: 10.200 @ 124.500
Rick Nowlan, Engine: 1000cc, Supercharger: no Turbos: no Tires: camoplast 10''


 


©2014 DragTimes - Disclaimer