How to Build a Go Kart
Not a hard job for someone with decent welding skils. If you have any
questions, send me a pm or comment! I'd be happy to help with any of your
Like me on Facebook at
Homebuilt Kawasaki KZ-650 powered Gocart
This was a project for me to pass the time between my '57 Chevy
Street/Strip car , my Rear wheel drive 350 Chevy powered Z-24 Cavalier, and
my current '29 Chevy truck street rod with a blown and injected 350. For
more info on the buildup and links to the rest of my projects go to:
I have since sold it to help finance my 29 Chevy truck project.
Briggs and Stratton Powered Homemade Prototype Buggy
A short video of my homemade 3hp Briggs & Stratton Buggy.
The buggy has an upside down car differential and a 3 speed gearbox. The
primary drive is belt drive and this is used as a clutch. The final drive
is chain drive from the gearbox to the differential. The steering system is
a steering box from a mitsubishi colt and the steering rods have been
modified to suit the buggy. It isn't very fast but can tow a car trailer or
a boat trailer and it goes anywhere.
Mini buggy walkaround and startup, mini sandrail
My first mini buggy build. Built from scratch. Runs a CBR600 f4 engine, fox
2.0 air shocks all around. Idle is a little high right now but an easy fix.
I'll add some more videos of it running soon.
600cc Gocart from Stockholm Ice cart
Jonas is Singel and plays allan, Gocart from Sweden, Stockholm with a 600cc
engine from a honda hornett. More info at http://www.norrortracing.se
Low budget go kart build + first test run
1-custom frame welded together
2-rear axle (22mm threaded steel shaft)
2- DIY rear axle bearings
3- full set of wheels from a kids pedal kart
4- hydraulic rear disk brake ( small dirt bike )
5- engine mounted ( 50cc 2-stroke scooter engine )
6- set up the throttle + brake pedals
it still needs some work
My sweeeeet gokart -multiple short clips.
I put a few pictures and some videos together of my highly modified manco
It has 7.2" of front wheel travel and 6.5" on the back. It is powered by a
honda copy 16hp running a cvt setup. I originally used blaster rear shocks
in the rear also but switch them for honda 400 ex front shocks
Three dog reverse trike motorized go kart test footage
This is a the first real test footage of the Three Dog reverse trike go
kart built from scratch. The only components that were sourced are the
Harbor Freight 6.5HP 200cc motor, the wheels, and front spindles.
Everything else was designed, engineered, and fabricated by D. Soetenga.
This reverse trike was built for a $350.00 budget and it only weighs 80lbs
total with a 34lbs motor. After these test runs some modifcations will be
made to the design.
Homemade Go Karts And Mini Bikes
This is a RE-UPLOAD of a video from 2009. The original had a music
copyright, therefore preventing most people from viewing it. Continued...
Presented in crystal clear 480p, featuring little in the way of go-kart
Link to 2013 Go-Kart video: http://www.youtube.com/watch?v=Ax429NlLwJk
Link to 2013 Go-Kart informative walk-around:
Music is from this Royalty Free Source:
Home Made GO KART from MONTALBAN RIZAL PHILLIPPINES
The time has come after a long time ive started to build and finish it with
my own knowledge and money,it was a hard project and cost me about 19 to 20
thousand pesos.It has a 2 stroke 50cc 2JA YAMAHA JOG engine and has a 14:13
spracket tooth ratio.
Homemade Kawasaki buggy.
Join Maker Studios!
Click here to see if your channel qualifies for RPM Network/Maker Studios:
Homemade Kawasaki buggy 4WD. It is built by non-profit association called
"RS Motorsport MTÜ". I just do advertising
Weight: 540 Kg. Racing equipment Check it out;
http://www.rsmotorsport.ee. They are doing good things
Viper Offroad gokart on the wheels!
Finally got the wheels on, the brake caliper tacked on, the motor mounted
on the sprocket, and the front steering welded up. Here's a quick video,
please don't make fun of the shoes, they are my wife's.